1. Tools necessary for this chapter

Sestavení stavebnice Prusa CORE One+

• 1. Introduction
• 2. Sestavení rámu
• 3. Kompletace zadního plátu tiskárny
• 4. Sestavení vyhřívané podložky
• 5. Sestava CoreXY
  1. Tools necessary for this chapter
  2. Rod holders: parts preparation
  3. Assembling the rod holders
  4. Preparing the front rod holders
  5. Installing the front rod holders
  6. XY carriage: parts preparation
  7. Montáž dílu XY-carriage
  8. Assembling the linear holder left
  9. Assembling the linear holder right
  10. Attaching the linear holder assemblies
  11. Hlazené tyče INFO
  12. Mounting the smooth rods
  13. Securing the rear rod holders
  14. Securing the front rod holders
  15. Motor mounts: parts preparation
  16. Motor mounts: part preparation
  17. Assembling the XY-motor-mount-right I.
  18. Assembling the XY-motor-mount-right II.
  19. Assembling the XY-motor-mount-left I.
  20. Assembling the XY-motor-mount-left II.
  21. Belt tensioners: parts preparation I.
  22. Belt tensioners: parts preparation II.
  23. Příprava dílů tensioner pulley
  24. Assembling the belt tensioner left I.
  25. Assembling the belt tensioner left II.
  26. Assembling the belt tensioner right
  27. Installing the belt tensioners: parts preparation
  28. Installing the motor mount left
  29. Installing the motor mount right
  30. Osazení levého napínáku řemenu
  31. Osazení pravého napínáku řemenu
  32. Linear rail: parts preparation
  33. Attaching the linear rail
  34. Securing the linear rail
  35. Installing the linear rail: parts preparation
  36. Installing the linear rail assembly
  37. Linear rail: removing the safety pins
  38. Bed-stop (zarážka podložky): příprava dílů
  39. Sestavení zarážky podložky (bed-stop)
  40. Osazení zarážky podložky (bed-stop)
  41. X&Y motors: parts preparation
  42. Installing the X-axis pulley
  43. Installing the Y-axis pulley
  44. XY belts: parts preparation
  45. Řemeny osy XY INFO
  46. Y belt guiding: Y motor pulley
  47. Securing the Y-axis motor
  48. Y belt guiding: Y motor mount
  49. Y belt guiding: belt tensioner
  50. Y belt guiding: X motor mount
  51. Y belt guiding: securing the belt
  52. X belt guiding: X motor pulley
  53. Securing the X-axis motor
  54. Y belt guiding: X motor mount
  55. X belt guiding: belt tensioner
  56. X belt guiding: Y motor mount
  57. X belt guiding: securing the belt
  58. Checking the belt guidance
  59. Bowden guide: parts preparation
  60. Securing the Nextruder holder
  61. Securing the Y motor cable
  62. Securing the X motor cable
  63. Installing the bowden guide
  64. White LED strip: parts preparation
  65. Sticking the White LED strip
  66. Installing the white LED assembly
  67. Door sensor & White LED strip: parts preparation
  68. Inserting the zip ties
  69. Installing the door sensor
  70. Securing the door sensor cable
  71. Guiding the cables: LED and door sensor
  72. Poznámka k Buddy3D kameře
  73. Smooth rods: parts preparation
  74. Installing the CoreXY assembly
  75. Securing the smooth rods
  76. Aligning the linear rail
  77. Guiding the corexy cables
  78. Guiding the cooling fan cables
  79. Zajištění zarážky podložky (bed-stop)
  80. Connecting the cooling fans cables
  81. Connecting the corexy cables
  82. Je čas na Haribo!
  83. Hotovo
• 6. Montáž Nextruderu
• 7. Bodywork & Electronics
• 8. Trim, Door & xLCD
• 9. Calibration & First run
• Seznam změn v manuálu