⬢Click the button to go to menu.
⬢Go to Prepare
⬢Go to Preheat ABS
⬢Click Preheat ABS 1
DE
Login- English
- Home
- Plus 1.75 mm
- Montageanleitungen
- Original Prusa i3 Plus 1.75 mm Bausatz Montage
- Calibrate i3 Plus LCD/SD
Calibrate i3 Plus LCD/SD
Menu
- Original Prusa i3 Plus 1.75 mm Bausatz Montage
- Calibrate i3 Plus LCD/SD
- 1. Preheat the printer
- 2. Wait for the temperature
- 3. Home the axes
- 4. Adjust the corners
- Introduction
- First print i3 Plus LCD/SD
Calibrate i3 Plus LCD/SD
Relevant für:
Zuletzt aktualisiert 4 years ago Schwierigkeit
Mittel Schritte
4 Verfügbare Sprachen
⬢It is important to let the printer preheating for at least 10 minutes.
When the temperature reaches 50'C, check if fan on the nozzle is running! If not, disconnect the printer and check the connection of nozzle fan!
⬢Go to Prepare
⬢Click Auto home. Printer will move all its axes to the origin.
⬢Click 'Disable steppers'. That will allow you to move the X carriage and printbed by hand.
⬢Move the head and printbed in a way that printhead is in the corner.
⬢With a regular business card (250g), check the distance between the tip of the nozzle and bed.
⬢Adjust the height of the bed with the adjuster ring. You should be able to easily slide the business card between the nozzle and the bed with a little bite. We call it Al dente ;-)
⬢After adjusting, alway compress the bolt against the blue frame under the printbed. Gravity is not always enough to settle it after adjusting.
⬢Repeat for all 4 corners.
⬢YOU ARE DONE!
War diese Anleitung hilfreich?
Kommentare
Sie haben noch Fragen?
Wenn Sie eine Frage zu etwas haben, das hier nicht behandelt wird, sehen Sie sich unsere zusätzlichen Ressourcen an.
Und wenn das nicht ausreicht, können Sie über die Schaltfläche unten oder an die [email protected] eine Anfrage senden.