EN
  • Čeština
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

1. Introduction

1. Introduction
Relevant for:
Last updated 3 months ago
1. Introduction
 Difficulty
Very easy
 Steps
13
 Available languages
CSPLDEITFR
Introduction
Introduction
Welcome to the assembly instructions for the Original Prusa MINI Enclosure.
In this chapter, you will learn all the important information needed for the assembly. Please read carefully.
Important notice: the package contains metal sheet profiles that have sharp edges. Handle the parts very carefully.
If children are involved in assembly, always supervise them to avoid injury.
Printer compatibility
Printer compatibility
Printer compatibility
The MINI Enclosure assembly manual is specifically intended for these devices:
Original Prusa MINI+
Original Prusa MINI
Additional tools
Additional tools
Additional tools
Tools that are not included but can make assembly easier, especially when installing add-ons.
Additional tools:
Side cutters for cutting zip ties and side panels cutouts
Pliers for securing the E-clip washer 
Labels guide
Labels guide
Labels guide
All the boxes and bags including parts for the build are labelled.
The FASTENERS A and FASTENERS B bags include an extra spare of each part contained in the bag. The amount of spare parts is always written on the label under the individual part. This number is included in the total number of each type of part.
The amount of the nylon rivet spare might slightly differ, but never less than the amount indicated on the label.
Use labels for reference
Use labels for reference
Use labels for reference
Fasteners on the labels has a scale of 1:1 and can be used to identify parts :-)
The numbers in parentheses below the fastener picture indicate the number of extra pieces added to the SPARE package.
For the most common screws and nuts you can also use the enclosed letter, which contains Prusa Cheatsheet on the other side.
You can download it from our site help.prusa3d.com/cheatsheet. Print it at 100 %, don't rescale it, otherwise, it won't work.
View high resolution images
View high resolution images
When you browse the guide on help.prusa3d.com, you can view the original images in high resolution for clarity.
Just hover your cursor over the image and click the Magnifier button ("View original") in the top left corner.
Reward yourself
Reward yourself
Reward yourself
From the experience of building Original Prusa printers, we know that Haribo Bears are an integral and important part of every kit. Although it's not entirely about building a printer now, we've got your safety in mind, and added some amount of gummy bears to your kit as well.
Do not eat the whole bag right at the beginning of the assembly! It is VERY IMPORTANT to distribute the amount correctly during assembly. We tried all sorts of combinations of quantities. Finally, we reached a successful result.
Open the package and arrange the gummy bears according to the picture. Don't eat anything now! Always wait for instructions.
Your package might contain fewer bears. In such a case, run immediately to the nearest candy store! The exact dosage is absolutely critical!!!
Eat the first gummy bear to boost your energy. Really, just one!
How to successfully finish the assembly
How to successfully finish the assembly
How to successfully finish the assembly
How to successfully finish the assembly
For a better handling, it is recommended to prepare a clean workbench with a space of at least 0.8 m x 0.8 m (31.5 in x 31.5 in). With access from two sides or more.
We're recommending a bright light above your workbench. Some parts inside the enclosure are dark and inadequate light could make a very difficult procedure.
Always read all the instructions at the current step first. This will help you to understand, what you need to do. Don't cut or trim unless you are told to!!!
Don't follow pictures only! It is not enough, the written instructions are as brief as they can be. Read them.
Read the comments from the other users. They are a great source of ideas. We read them too and based on your feedback improve the manual and the entire assembly.
Use a reasonable force. The printed parts are tough, but not unbreakable. If it doesn't fit, check your approach twice.
Most important: Enjoy the build, have fun. Cooperate with your kids, friends or partners. However, we take no responsibility for possible fights ;)
Upgrade your parts
Upgrade your parts
Upgrade your parts
Certain parts of your printer may be more susceptible to the higher temperatures that can occur inside the enclosure during printing. We recommend upgrading these parts to more durable ones:
Old MINI-minda-holder: on the first Original Prusa MINI units. Assembled from two parts. If you have this version, it is recommended to upgrade to the new one, which is available for download on Printables.
Instructions for replacing the part can be found in the separate guide.
The replacement changes the height of the SuperPINDA/M.I.N.D.A. sensor! Don't forget to recalibrate the first layer after replacing these parts.
New MINI-minda-holder: sturdy part, attached to the fan case. If you have this part, you do not need to upgrade it.
Print out all required parts before proceeding with the instructions.
Optional parts
Optional parts
Optional parts
We have designed enhancements that are not shipped by default in the kit, but you can print them out and add them to the enclosure during assembly. Fasteners are already included in the kit.
Print out the parts before you start assembly.
To see the full list of the parts, please visit our collection at Printables.com.
Add-ons
Add-ons
Add-ons
Have you purchased any add-ons along with the MINI Enclosure? Instructions for installing them are included in the manual, and you will be informed in advance for each add-on.
At the beginning of the instructions for each add-on, you will be reminded of the add-on symbol.
If you don't have any add-ons, you can skip the steps related to add-ons and proceed with the other necessary instructions.
We are here for you!
We are here for you!
We are here for you!
Lost in the instructions? Missing screw or cracked printed part? Let us know!
You can contact us using following channels:
Using comments under each step.
Using our 24/7 live chat at prusa3d.com
Writing an email to [email protected]
So, ready? Let's move to the next chapter 2. Assembling the Enclosure.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us