English
1. Preparing the upgrade kit
Step 1 of 15 (Chapter 1 of 9)
Contents
Comments
⬢Welcome to our step-by-step guide on upgrading your Original Prusa i3 MK3S/MK3S+ to the Original Prusa MK3.5S.
This upgrade manual is intended for MK3S and MK3S+ printers only. The MK3 version is not supported.
⬢Prepare the upgrade kit received from Prusa Research.
WARNING: Before you start disassembling the printer, ensure that you have successfully printed all the required parts for the upgrade.
Loading...
Contents
Original Prusa i3 MK3S/MK3S+ to MK3.5S upgrade
- 1. Introduction
- Preparing the upgrade kit
- Getting the necessary tools
- Labels guide
- Spare bag
- Printed parts - self printing
- Printable parts - Silver to Black PSU
- Printed parts post-processing
- We are here for you!
- Pro tip: inserting the nuts
- View high resolution images
- Important: Electronics protection
- Reward yourself
- How to successfully finish the assembly
- Additional Information
- Prepare your desk
- 2. Parts check
- 3. Printer dissasembly
- 4. xBuddy assembly
- 5. xLCD & PSU assembly
- 6. Heatbed upgrade
- 7. Extruder & connectivity upgrade
- 8. Preflight check
- Manual changelog MK3.5S upgrade
Comments
Log in to post a comment
JuanV
•
What are the required parts...?
Reply
JuanV
•
Ah just needed to scroll down a bit :-)
Reply