EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

Printing a G-code via PrusaLink

Printing a G-code via PrusaLink

Printing a G-code via PrusaLink
Relevant for:
Last updated 5 days ago
Printing a G-code via PrusaLink
 Difficulty
Easy
 Steps
4
 Available languages
CSPLDEJAESITFR

Step 1 Opening up PrusaLink

Opening up PrusaLink
Opening up PrusaLink
Check the printer physically if it's on and ready to print.
Insert the IP Address of your printer into a web browser to open up PrusaLink.

PrusaLink site will open up.  Log in, if necessary.

 

Remember, in case of MK3/S/+, there is the printer-specific PrusaLink Login, not your Prusa Account.
In order to send files to PrusaLink directly, you have to be connected to the same local network as the printer. The other way is to use VPN.

Step 3 Starting the print

Starting the print
Starting the print
Starting the print
Starting the print
Visit the Projects tab.
In the desired project file, select Start Print
Confirm the print sheet is clean and empty. Your printer will start printing.
Was this guide helpful?

Comments

Please sign in before adding a comment.
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us