JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Tree supports

Relevant for:
Last updated 3 years ago
This article is also available in following languages: 
ENCSPLESDEITFR

Unlike FDM supports, which are usually lattice or grid-like, SLA supports are scaffolding tree-like structures with very thin tips. They’re easy to remove and they leave little to no traces on the printed object’s surface when removed. This also means that an insufficient number of supports can lead to unwanted effects – e.g. heavy objects can detach during the print. Supports go hand in hand with object orientation – by rotating the object to an optimal position, you can minimize the need for supports.

You can get rid of tons of supports if you rotate the object to an optimal position. Teeth on this T-rex head can be printed without supports

Also, keep in mind that removing the supports can leave tiny marks on the surface, so if your object has certain areas that should be completely flawless (an ornament on a piece of jewelry, face of an action figure), try to keep the supports away from them.

PrusaSlicer 2.0 is fully equipped for automatic tree support generation. How does it work?

  1. Select the object that requires supports
  2. Click the SLA support points icon
  3. Choose the support point density and minimal points distance (default values should work fine for a majority of objects)
  4. Click Auto-generate points and wait until the process is finished
  5. Use the Preview mode to inspect whether all “islands” are supported – if not, you can manually adjust the supports.

SLA Support menu in PrusaSlicer

Another thing that you should consider using is the pad. The pad (enabled by default) is a large structure at the base of the print, which serves as the foundation for the supports. While it’s possible to have supports printed directly on the aluminum printing platform, the pad will ensure much better stability.

If you're printing your model solid, it can be quite heavy. Consider hollowing the model or add more supports, and/or make them thicker, so they can support the object’s weight.

Manual support editing

In some cases, the automatic support generation doesn’t deliver a 100% perfect result – this is normal since imported objects can be infinitely complex. We’re constantly improving our support generation subroutines to prevent these situations from happening. Either way, on certain occasions, supports have to be added manually – this can be done even when there are already auto-generated supports in place.

 

Comparison of automatically generated supports and manually edited supports

Click the Manual editing button. Previously generated supports will temporarily disappear to give you a better overview of the model. Use the left mouse button to add new support points. You can tweak the support thickness in manual editing mode by using the Head diameter slider, or you can go to Print settings – Supports and modify the following parameters to increase the thickness of supports:

  • Support head front diameter: 0.6 mm
  • Support head penetration: 0.6 mm
  • Support pillar diameter: 1.3 mm

Useful shortcuts

Shift + Left mouse dragAdd multiple points to the selection

CTRL + Left mouse click Add single support point to the selection

ALT + Left mouse clickRemove single support point from the selection

ALT + Left mouse dragRemove multiple points from the selection

CTRL + A Select all points
CTRL + Mouse WheelMove the clipping plane

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us