日本語
Login
3Dプリンター
マテリアル
部品 & アクセサリー
ソフトウェア
3Dモデル
応用事例
コミュニティ
ヘルプ
アカデミー
ブログ
会社概要
サポート
Original Prusa SL1
Original Prusa SL1キット組立て (v1.02)
2. Base & Tower | Tools and bags for this chapter
1. Tools and bags for this chapter
Step 1 of 35 (Chapter 2 of 6)
フルスクリーンモード
内容
コメント
⬢
この章で、準備するもの:
⬢
2.0mm Allen key
⬢
2.5 mm 六角レンチ
⬢
3.0mm Allen key
⬢
Wrench
⬢
Bag 2. Fasteners
⬢
Bag 2. Accessories
Note that the content of the depicted labels in this manual might differ from the ones in the package.
Loading...
次
内容
Original Prusa SL1キット組立て (v1.02)
1. はじめに
2. Base & Tower
Tools and bags for this chapter
パッケージからパーツを取り出し準備します
パッケージからパーツを取り出し準備します
タワーとPSUパーツの準備
Arranging the back plate
Connecting the tower
Connecting the tower
Connecting the SL1 PSU
タワーとPSUパーツの準備
Mounting the bottom plate
Mounting the supports
Mounting the adjustable feet
PSUケーブルの準備
Connecting the cables
ティルトモータの準備
ティルトモータの準備
The tilt motor assembly
The tilt motor assembly
The tilt motor assembly
リフレクターの準備
Mounting the reflector
右ブロワーファンの準備
右ブロワーファンの準備
Blower fan gasket
Fan assembly (new version)
Fan assembly (old version)
Blower assembly
Mounting the fan assembly
ティルト組立てパーツの準備
Resin sensor cable assembly
ティルトパーツの準備
Mounting the tilt assembly
Optical sensor calibration
Haribo休憩タイムです!
Final check
3. Covers & Platform
4. Electronics & Lid
5. Preflight check
Manual changelog SL1
コメント
ログイン
してコメントを投稿する
コメントなし