English
Čeština
Italiano
Deutsch
Polski
Français

Original Prusa SL1 vs. SL1S Speed

Descripción de la impresora
360 viewer
Original Prusa SL1 vs. SL1S Speed
Cableado de la electrónica de la placa base PrusA64 (SL1)
Notificaciones de la barra superior (SL1/SL1S)
Características de la impresora
Información general

Relevante para :

SL1 SL1S

Ultima actualización a year ago

Este artículo está también disponible en los siguientes idiomas:

En traducción...

¿Fue útil este artículo?

Fácil de comprender

Resolvió mi problema

Otra razón

Comentarios

Relacionado

Directory not empty #10546 (SL1/SL1S)
SL1 SL1S
Cannot remove project #10545 (SL1/SL1S)
SL1 SL1S
Mask noavail warning #10709 (SL1/SL1S)
SL1 SL1S
Calibration project is invalid #10543 (SL1/SL1S)
SL1 SL1S
Expect overheating #10714 (SL1/SL1S)
SL1 SL1S
Resin low #10712 (SL1/SL1S)
SL1 SL1S
Object cropped warning #10710 (SL1/SL1S)
SL1 SL1S
Wrong printer model #10544 (SL1/SL1S)
SL1 SL1S
Project analysis failed #10542 (SL1/SL1S)
SL1 SL1S
Project is corrupted #10541 (SL1/SL1S)
SL1 SL1S
Not enough layers #10540 (SL1/SL1S)
SL1 SL1S
Preload failed #10503 (SL1/SL1S)
SL1 SL1S
Remote API error #10407 (SL1/SL1S)
SL1 SL1S
Unauthorized #10406 (SL1/SL1S)
SL1 SL1S
Invalid API key #10405 (SL1/SL1S)
SL1 SL1S
Original Prusa SL1 vs. SL1S Speed
SL1 SL1S
Unknown printer model #10323 (SL1/SL1S)
SL1 SL1S
Resin measuring failed #10124 (SL1/SL1S)
SL1 SL1S
Cannot read project #10539 (SL1/SL1S)
SL1 SL1S
Boost board problem #10320 (SL1S)
SL1S
Disconnected UV LED panel #10321 (SL1/SL1S)
SL1 SL1S
A64 Overheat #10207 (SL1/SL1S)
SL1 SL1S
Printer Variant Mismatch #10711 (SL1/SL1S)
SL1 SL1S
Top-bar Notifications (SL1/SL1S)
SL1 SL1S
Brightness adjustment (SL1)
SL1
Tilt position invalid #10121 (SL1)
SL1 SL1S
Not connected to network #10402 (SL1/SL1S)
SL1 SL1S
Unexpected error #10501 (SL1/SL1S)
SL1 SL1S
Parameters out of range #10707 (SL1/SL1S)
SL1 SL1S
Not enough resin #10706 (SL1/SL1S)
SL1 SL1S
Incorrect printer model #10705 (SL1/SL1S)
SL1 SL1S
Can't copy project #10704 (SL1/SL1S)
SL1 SL1S
Ambient temperature too high #10702 (SL1/SL1S)
SL1 SL1S
Ambient temperature too cold #10703 (SL1/SL1S)
SL1 SL1S
Tower position error #10123 (SL1/SL1S)
SL1 SL1S
Display test failed #10120 (SL1/SL1S)
SL1 SL1S
Tower check failed #10118 (SL1/SL1S)
SL1 SL1S
Tilt endstop not reached #10115 (SL1/SL1S)
SL1 SL1S
Tower endstop not reached #10114 (SL1/SL1S)
SL1 SL1S
Calibration error #10113 (SL1/SL1S)
SL1 SL1S
QR Error codes
MINI MINI+SL1 SL1S
Resin too low #10108 (SL1/SL1S)
SL1 SL1S
This Wizard cannot be canceled #10522 (SL1/SL1S)
SL1 SL1S
File not found #10518 (SL1/SL1S)
SL1 SL1S
Fan failure #10106 (SL1/SL1S)
SL1 SL1S
Tower moving failed #10103 (SL1/SL1S)
SL1 SL1S
An unexpected error has occurred #10701 (SL1)
SL1
File already exists! #10520 (SL1)
SL1 SL1S
Internal memory full #10516 (SL1/SL1S)
SL1 SL1S
Cannot get update channel #10514 (SL1)
SL1
Cannot set update channel #10513 (SL1/SL1S)
SL1 SL1S
No file to reprint #10508 (SL1)
SL1
Internal error (DBUS mapping failed) #10507 (SL1/SL1S)
SL1 SL1S
Another action is already running #10506 (SL1/SL1S)
SL1 SL1S
Failed to read the configuration file #10505 (SL1)
SL1 SL1S
Tower homing failed #10102 (SL1/SL1S)
SL1 SL1S
Opening project failed #10504 (SL1/SL1S)
SL1 SL1S
Speaker test failed #10310 (SL1/SL1S)
SL1 SL1S
UV led voltage error #10309 (SL1)
SL1
Printer is not UV calibrated #10308 (SL1)
SL1
Resin sensor error #10307 (SL1/SL1S)
SL1 SL1S
Unexpected MC error #10306 (SL1/SL1S)
SL1 SL1S
Wrong revision of motion controller #10301 (SL1)
SL1 SL1S
Tilt homing failed #10101 (SL1/SL1S)
SL1 SL1S
Saving log file (SL1/SL1S)
SL1 SL1S
De-lamination / separated layers (SL1/SL1S)
SL1 SL1S
Object orientation
SL1 SL1S
Broken supports (SL1/SL1S)
SL1 SL1S
Loud noises from printer (SL1/SL1S)
SL1 SL1S

¿Todavía tienes preguntas?

Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a [email protected] o mediante el botón que hay más abajo.

Contacta con nosotros