English
1. Preparing MK2.5S upgrade kit
Step 1 of 9 (Chapter 1 of 7)
Contents
Comments
⬢Welcome to the tutorial how to upgrade your Original Prusa i3 MK2/S to Original Prusa i3 MK2.5S
MK2S to MK2.5S upgrade is no longer being supported nor sold as a kit. Please see this article about current upgrading options for MK2/S and MK2.5 printers.
⬢Please prepare MK2.5S upgrade parts received from Prusa Research.
The items on the picture might differ from yours.
WARNING: This assembly guide is valid ONLY FOR SINGLE MATERIAL MK2.5S!!! For MK2.5S MMU2S, please follow Original Prusa MMU2S Upgrade. Different parts are needed!
Contents
Original Prusa i3 MK2 to MK2.5S upgrade
Comments
Log in to post a comment
Steve Gevers
•
I have a mk2s with mmu. I bought both upgrade to mk2.5s and mmu2. The warning above is confusing. The link clearly doesn’t get my mk2s upgraded. Hoping as I get further into this, the instructions will address that my starting point is not mk2s single material.
Nate
•
I have both the 2.5 and 2.5s kit. Based on title this would take me from 2.0s to 2.5s as one list of instructions. Can you please confirm this is correct as I was told by customer service when purchasing the 2.5S kit there were not instructions for 2.0S to 2.5S. Aslo could I change out just the bed and not do the other parts of the upgrade?
Filip M - Official Prusa CS
•
Hi Nate, please follow the current guide if you need to upgrade from MK2/S.
You need to upgrade everything, you can’t just change the bed only.
You need to upgrade everything, you can’t just change the bed only.
Martin L. - Official Prusa CS
•
Hello!
What I recommend is to follow these instructions until the end and then start this guide [[Topic:Original Prusa i3 MK3S to MMU2S]] from the beginning. That’s the safest way.
What I recommend is to follow these instructions until the end and then start this guide [[Topic:Original Prusa i3 MK3S to MMU2S]] from the beginning. That’s the safest way.