1. Tools necessary for this chapter

Original Prusa MMU3 Assembly (includes upgrade from MMU2S)

• 1. Introduction
• 2. MMU2S Disassembly (UPG)
• 3. MMU2S Buffer Disassembly (UPG)
• 4. Idler Body Assembly
• 5. Selector Assembly
• 6. Pulley Body Assembly
• 7A. Cassette Buffer Assembly
• 8. Spool holder Assembly
• 9A. MK4/S, MK3.9/S Nextruder mod
• 9B. MK3S+ / MK3.5 Extruder mod (KIT)
• 9C. MK3S+ Extruder (UPG)
• 10A. MK4/S, MK3.9/S Setup and Calibration
• 10B. MK3S+ Setup and Calibration
  1. Tools necessary for this chapter
  2. Attaching the MMU unit (part 1)
  3. Attaching the MMU unit (part 2)
  4. Attaching the cable bundle
  5. Guiding the MMU cable
  6. MK3S+ Trimming the electronics box door
  7. MK3S+ Trimmed electronics door installation
  8. MK3S+ Electronics wiring diagram
  9. MK3S+ Connecting the data and FS cables
  10. MK3S+ Connecting the power cables
  11. MK3S+ Closing the electronics box
  12. Software Download
  13. PrusaSlicer setup for MMU3
  14. Firmware files download
  15. Selecting a Printer firmware file
  16. MK3S+ Firmware flashing (part 1)
  17. MK3S+ Firmware flashing (part 2)
  18. MK3S+ Turning the MMU on and reset
  19. MMU3 Firmware flashing (part 1)
  20. MMU3 Firmware flashing (part 2)
  21. IR filament sensor calibration (Part 1)
  22. IR filament sensor calibration (Part 2)
  23. IR filament sensor calibration (Part 3)
  24. SuperFINDA sensor calibration info
  25. SuperFINDA calibration
  26. Error code details (Part 1)
  27. Error code details (Part 2)
  28. MMU-to-Extruder PTFE tube parts preparation
  29. MMU-to-Extruder PTFE tube
  30. Spoolholders setup
  31. Connecting Buffer PTFE tubes
• 10C. MK3.5 Setup and Calibration
• 11. First Flight