English
1. Tools necessary for the next steps
Step 1 of 36 (Chapter 2 of 6)
Contents
Comments
⬢For this guide, please prepare:
⬢2.5mm Allen key
⬢3mm Allen key
Contents
Original Prusa XL Dual-Head (Semi-Assembled) (1.06)
- 1. Introduction
- 2. Base & Side frame assembly
- Tools necessary for the next steps
- Base frame parts preparation
- Extrusion alignment
- Right rear extrusion assembly
- Securing the right rear extrusion
- Left rear extrusion assembly
- Z-Axis assembly clarification
- Z-Axis fixed assembly
- Securing the Z-Axis fixed
- Z-Axis rotary assembly
- Securing the Z-Axis rotary
- Torque indicator: parts preparation
- Assembling the Torque indicator
- Final tightening with torque indicator
- Haribo time!
- xLCD: parts preparation
- xLCD cable covers: parts preparation
- Extrusion covers: parts preparation
- Mounting the xLCD
- Aligning the xLCD
- xLCD assembly versions
- Version A: Installing the xLCD PE cable
- Version B: Installing the xLCD PE cable
- xLCD PE cable management
- xLCD cable routing
- Routing the cables
- Routing the cables
- Routing the cables
- Horizontal cable inserting
- Corner frame cover
- Inserting Z-motor-cable-bottom-cover
- Preparing the cables for rear cover
- Inserting the second motor cable
- Inserting Z-motor-cable-bottom-cover
- Haribo time!
- Well done!
- 3. CoreXY & Back assembly
- 4. Heatbed & Side panels assembly
- 5. Extruder & accessories assembly
- Manual changelog XL Dual-Head (Semi-Assembled)