English
1. Getting the necessary tools
Step 1 of 19 (Chapter 3 of 9)
Contents
Comments
⬢1.5mm & 2.5mm Allen key
⬢Needle-nose pliers
Contents
Original Prusa i3 MK2S kit assembly
- 1. Introduction
- 2. Y-axis assembly
- 3. X-axis assembly
- Getting the necessary tools
- 3D printed parts
- Preparing the rods
- Preparing the printed parts
- Preparing the tension screws
- Assemble the X-axis base
- Preparing the X-end idler
- Prepare the X-carriage
- Placing the X-carriage
- Tighten the X-carriage
- Cleaning up
- Assemble the X-motor
- Assemble the X-motor pulley
- Assembling the X-endstop
- X-endstop alignment
- X-Endstop check
- Cable management
- Cable wrapping
- All done!
- 4. Z-axis assembly
- 5. Extruder Assembly
- 6. LCD assembly
- 7. PSU & Heatbed assembly
- 8. Electronics assembly
- 9. Preflight check
Comments
Log in to post a comment
Rémi Paquet
•
Can i suggest adding all Allen key needed in the step 3 ?
We need a different Allen Key to tighten the motor pulley.
Great work with the instruction, I really appreciate it so far !!!!
We need a different Allen Key to tighten the motor pulley.
Great work with the instruction, I really appreciate it so far !!!!
Jakub Dolezal
•
Hi Rémi, thanks for the suggestion and for the positive feedback. I will update the instructions ;)