EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

4. Upgrading to MMU2S

4. Upgrading to MMU2S
Relevant for:
Last updated 3 years ago
4. Upgrading to MMU2S
 Difficulty
Moderate
 Steps
3
 Available languages
CSPLESDEITFRJA
Difference between MMU2S kits
Difference between MMU2S kits
There are two different kits for the MMU2S:
The first kit is for updating from single material MK3S/MK2.5S to MMU2S
The second kit is for updating is from MK2S MMU1 to MK2.5S MMU2S (No longer available)
Both kits differ in the amount of the included parts. However, the assembly manual is the same and exceptions are noted in separate steps.
MMU1 to MMU2S differences
MMU1 to MMU2S differences
MMU1 to MMU2S differences
MMU1 to MMU2S differences
What is missing or is different in the MMU1 to MMU2S upgrade kit:
The kit doesn't include all motors. To be exact for the MMU2S unit you need to have 2 motors, which we already have disassembled from the MMU1. (Note the third motor in the picture was used to build MK2.5S extruder)
One disassembled motor will be used during the idler-body assembly. There is a note to remind you :)
The other motor will be used as a "pulley motor" for the MMU2S unit and needs extra assembly, which is covered in the MMU2S assembly manual.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us