English
1. Tools necessary for this chapter
Step 1 of 81 (Chapter 5 of 10)
Contents
Comments
⬢For this chapter, please prepare:
⬢Needle-nose pliers
⬢2.0mm Allen key
⬢2.5mm Allen key
⬢T10 torx key / T10 torxy screwdriver
Contents
Prusa CORE One kit assembly (1.00)
- 1. Introduction
- 2. Base assembly
- 3. Back assembly
- 4. Heatbed assembly
- 5. CoreXY assembly
- Tools necessary for this chapter
- Rod holders: parts preparation
- Assembling the rod holders
- Preparing the front rod holders
- Installing the front rod holders
- XY carriage: parts preparation
- Assembling the XY-carriages
- Assembling the linear holder left
- Assembling the linear holder right
- Attaching the linear holder assemblies
- Smooth rods INFO
- Mounting the smooth rods
- Securing the rear rod holders
- Securing the front rod holders
- Motor mounts: parts preparation
- Motor mounts: part preparation
- Assembling the XY-motor-mount-right I.
- Assembling the XY-motor-mount-right II.
- Assembling the XY-motor-mount-left I.
- Assembling the XY-motor-mount-left II.
- Belt tensioners: parts preparation I.
- Belt tensioners: parts preparation II.
- Assembling the belt tensioner left I.
- Assembling the belt tensioner left II.
- Assembling the belt tensioner right
- Installing the belt tensioners: parts preparation
- Installing the motor mount right
- Installing the motor mount left
- Installing the belt-tensioner-left
- Installing the belt-tensioner-right
- Linear rail: parts preparation
- Attaching the linear rail
- Securing the linear rail
- Installing the linear rail: parts preparation
- Installing the linear rail assembly
- Linear rail: removing the safety pins
- Bed-stop: parts preparation
- Assembling the bed-stop
- Mounting the bed-stop
- X&Y motors: parts preparation
- Installing the X-axis pulley
- Installing the Y-axis pulley
- XY belts: parts preparation
- XY belts INFO
- Y belt guiding: Y motor pulley
- Securing the Y-axis motor
- Y belt guiding: Y motor mount
- Y belt guiding: belt tensioner
- Y belt guiding: X motor mount
- Y belt guiding: securing the belt
- X belt guiding: X motor pulley
- Securing the X-axis motor
- Y belt guiding: X motor mount
- X belt guiding: belt tensioner
- X belt guiding: Y motor mount
- X belt guiding: securing the belt
- Checking the belt guidance
- Securing the Nextruder holder
- Bowden guide: parts preparation
- Securing the Y motor cable
- Securing the X motor cable
- Installing the bowden guide
- White LED strip: parts preparation
- Sticking the White LED strip
- Installing the white LED assembly
- Door sensor & White LED strip: parts preparation
- Inserting the zip ties
- Installing the door sensor
- Securing the door sensor cable
- Guiding the cables: LED and door sensor
- Smooth rods: parts preparation
- Installing the CoreXY assembly
- Securing the smooth rods
- Aligning the linear rail
- Guiding the corexy cables
- Guiding the cooling fan cables
- Fixing the bed-stop
- Connecting the cooling fans cables
- Connecting the corexy cables
- Haribo time
- Done
- 6. Nextruder assembly
- 7. Bodywork & Electronics
- 8. Trim, Door & xLCD
- 9. Calibration & First run
- Manual changelog
Comments
Log in to post a comment
No comments