English
1. Tools necessary for this chapter
Step 1 of 47 (Chapter 5 of 9)
Contents
Comments
⬢For the following steps, please prepare:
⬢2.5mm Allen key
⬢3.0mm Allen key for silver PSU version
⬢Needle-nose pliers for tightening and cutting zip ties
⬢Torx key T8/10
⬢Phillips screwdriver
Contents
Original Prusa i3 MK3S/MK3S+ to MK3.5S upgrade (1.0)
- 1. Introduction
- 2. Parts check
- 3. Printer dissasembly
- 4. xBuddy assembly
- 5. xLCD & PSU assembly
- Tools necessary for this chapter
- Cable clips: parts preparation
- Installing the cable clips
- Installing the cable clips
- xLCD assembly: parts preparation (part 1)
- xLCD assembly: parts preparation (part 2)
- Installing the xReflector sticker
- Covering the xLCD
- Installing the PE Faston
- xLCD cables: parts preparation
- Attaching the knob
- Connecting the xLCD assembly
- Attaching the xLCD assembly
- Guiding the xLCD cable
- Connecting the PE cable: xBuddy
- Black vs Silver PSU
- PSU cables (black PSU): parts preparation
- Connecting the PSU (Black PSU): PE cable
- Power cables info (Black PSU)
- Connecting the PSU (Black PSU)
- Connecting the power panic (Black PSU)
- Guiding the power cable bundle (Black PSU)
- Guiding the power cable bundle (Black PSU)
- Connecting the PSU cable (Black PSU): parts preparation
- Guiding the PSU cables (Black PSU): PE cable
- Connecting the PSU cables (Black PSU): PE cable
- PSU - PE cable (Silver PSU): parts preparation
- Inserting M3nEs nut (Silver PSU)
- Guiding the PE cable (Silver PSU)
- Connecting the PE cables (Silver PSU)
- Connecting the extended PE cable (Silver PSU)
- Guiding the Z motor right cable (Silver PSU)
- Guiding the power cable bundle (Silver PSU)
- Guiding the power cables (Silver PSU)
- Power panic extended cable (Silver PSU): parts preparation
- Extending the power panic cable (Silver PSU)
- Connecting the PE cable (Silver PSU)
- Connecting the PSU cables (Silver PSU)
- Connecting the power panic cable (Silver PSU)
- Securing the PSU cables
- Guiding the Z motor left cable
- Motor cable adapters: parts preparation
- Connecting the motor cable adapters
- Connecting the motor cables
- Connecting the xLCD cables
- Haribo
- That's it
- 6. Heatbed upgrade
- 7. Extruder & connectivity upgrade
- 8. Preflight check
- Manual changelog MK3.5S upgrade
Comments
Log in to post a comment
No comments