⬢Guide the LCD cable through the cutout in the bottom panel.
⬢Secure the textile sleeve on the cable bundle with the zip tie. Do not over tighten the zip tie, it may cut the cables!
⬢From the inside, push two thumb screws M3x8 through the bottom profile.
⬢Place the LCD assembly close to the LCD cables, like in the picture. Mind the same orientation of the LCD as in the picture. See the LCD-supports for better understanding.
Note that both cables are marked with stripes on one side. Correct connection order is important!
⬢Connect the LCD cable marked with TWO STRIPES to the left slot (called EXP2) on the LCD controller.
⬢Connect the LCD cable marked with ONE STRIPE to the right slot (called EXP1) on the LCD controller.
⬢Slide the LCD assembly onto the two M3x8 screws in the frame and tighten them.