English
1. Introduction
Step 1 of 24 (Chapter 13 of 18)
Contents
Comments
⬢This chapter guides you through the installation of the MMU2S into the Enclosure.
⬢The MMU2S can only be installed after the Hinged Lid is in place.
Contents
Original Prusa Enclosure assembly (external display mounting)
- 1. Introduction
- 2A. Preparing the printer (MK4/S & 3.9/S)
- 2B. Preparing the printer (MK3S+ Black PSU)
- 2C. Preparing the printer (MK3S+ Silver PSU)
- 3. Assembling the enclosure
- 4A. Installing the printer (MK4/S & 3.9/S)
- 4B. Installing the printer (MK3S+ Black PSU)
- 4C. Installing the printer (MK3S+ Silver PSU)
- Manual changelog Enclosure kit
- Fire Suppression System (add-on)
- Hinged Lid (add-on)
- Hinged Lid with MMU3
- Hinged lid with MMU2S
- Introduction
- Removing the LCD
- Removing the filament guide
- Removing the printer
- Removing the printer
- Installing the MMU2S
- Preparing the printer (MK3S+ with MMU2S)
- Installing the printer
- Installing the PSU
- Adjusting the printer
- Mounting the LCD: parts preparation
- Mounting the LCD
- Assembling the grommets: parts preparation
- Assembling the MMU-grommets
- Mounting the MMU-grommets
- Mounting the MMU-grommets
- Mounting the MMU-grommets (optional)
- Guiding the PTFE tubes
- Assembling the buffer feet: parts preparation
- Assembling the buffer feet
- Mounting the buffer feet
- Mounting the buffer feet
- Joining the buffer
- That's it!
- Advanced filtration system (add-on)
- Mechanical lock (add-on)
- Quick release PSU cable - MK3S+ Black PSU (add-on)
- Quick release PSU cable - MK4/3.9 Black PSU (add-on)
- White LED strip (add-on)
Comments
Log in to post a comment
No comments