English
1. Introduction
Step 1 of 23 (Chapter 15 of 18)
Contents
Comments
⬢This guide will take you through the installation of the Mechanical lock on the Original Prusa Enclosure.
The supplied fasteners contain extra spare parts.
⬢All printable parts are available for download at Printables.com in case a part is damaged or missing.
Contents
Original Prusa Enclosure assembly (external display mounting) (v1.03)
- 1. Introduction
- 2A. Preparing the printer (MK4/S & 3.9/S)
- 2B. Preparing the printer (MK3S+ Black PSU)
- 2C. Preparing the printer (MK3S+ Silver PSU)
- 3. Assembling the enclosure
- 4A. Installing the printer (MK4/S & 3.9/S)
- 4B. Installing the printer (MK3S+ Black PSU)
- 4C. Installing the printer (MK3S+ Silver PSU)
- Manual changelog Enclosure kit
- Fire Suppression System (add-on)
- Hinged Lid (add-on)
- Hinged Lid with MMU3
- Hinged lid with MMU2S
- Advanced filtration system (add-on)
- Mechanical lock (add-on)
- Introduction
- Tools necessary for this chapter
- Removing the door panel
- Disassembling the door panel
- Assembling the lock insert: parts preparation
- Assembling the lock housing
- Assembling the door holders: parts preparation
- Assembling the door holders
- Mounting the Lock Door Holders
- Assembling the lock mechanism: parts preparation
- Assembling the lock mechanism
- Assembling the lock mechanism
- Mounting the rods: parts preparation
- Mounting the rods
- Mounting the rods
- Mounting the rods
- Mounting the rods
- Covering the lock mechanism: parts preparation
- Covering the lock mechanism
- Installing the rod latches: parts preparation
- Installing the rod latches
- Attaching the door panel
- That's it!
- Quick release PSU cable - MK3S+ Black PSU (add-on)
- Quick release PSU cable - MK4/3.9 Black PSU (add-on)
- White LED strip (add-on)
Comments
Log in to post a comment
No comments