1. Begin assembly

Prusa Connect & PrusaLink

• PrusaLink / Prusa Connect with RPi 3/4 USB (MK2.5/S MK3/S/+)
  1. Begin assembly
  2. Introduction
  3. Parts preparation: Raspberry Pi
  4. Preparing necessary software
  5. Setting up the SD card in Pi Imager
  6. Setting up the SD card in Pi Imager 2
  7. Inserting the SD card
  8. Connecting the RPi to the printer
  9. Powering up the Raspberry Pi
  10. Setting the printer up
  11. Setting the printer up
  12. Prusa Connect Log in
  13. Opening up PrusaLink Wizard
  14. PrusaLink Wizard - Credentials
  15. PrusaLink Wizard - Printer Info
  16. PrusaLink Wizard - Recap
  17. Adding the printer into Prusa Connect
  18. Printing a file from PrusaLink
  19. Printing a file from PrusaLink
  20. Printing a file from Prusa Connect
  21. Prusa Connect file management
  22. You are set!
• Camera setup for PrusaLink / Prusa Connect
• Prusa Connect - Telegram notifications setup
• Prusa Connect - Discord notifications setup
• Prusa Connect - Slack notifications setup
• How to update PrusaLink (MK2.5/S MK3/S/+)
• Sending files from PrusaSlicer to PrusaLink
• Printing on MK3/S/+ via PrusaLink
• ESP Camera for Prusa Connect