English
Čeština
Español
Italiano
Deutsch
Polski
Français

Tested resins

Relevant for:

SL1 SL1S

Last updated 3 years ago

This article is also available in following languages:

We have tested hundreds of resins before we released the SL1, and still are trying out different types, colors and brands. The table below is extracted from PrusaSlicer, per January 2020. Updates will happen, both regarding exposure-times and the resins, so the best way to check is to download PrusaSlicer and check what is available there as presets.

All resins will work with 0.05mm layer-height. Not all will work with lower layer-heights like 0.025 - 0.01mm.

Exposure-times are developed around the Original Prusa SL1, and might not work on other machines.

Material	Exposure-time (Seconds)	Initial exposure-time(Sec.)
3DM-ABS	12	35
3DM-Vulcan Gold	12	30
BlueCast Phrozen Wax	15	50
BlueCast EcoGray	6	40
BlueCast Kera Master Dental	6	45
BlueCast X10	4	100
Esun Bio-Photopolymer Resin White	5	30
Esun Standard Resin Black	6	30
Photocentric Ash Grey	9	30
Resinworks 3D Violet	15	30
Resinworks 3D Green	17	30
Prusa Azure Blue Tough	7	35
Prusa Maroon Tough	6	35
Prusa Pink Tough	7	35
Prusa White Tough	6.5	35
Prusa Transparent Tough	6	15
Prusa Green Dental Casting	12	40
Prusa Transparent Green Tough	5	35
Prusa Clear ABS like	6	30
Prusa ABS like White	6	30
Prusa Grey High Tenacity	5	30
Prusa Magenta Super Low Odor	5	35
Prusa Yellow Super Low Odor	5	35
Prusa Orange-Yellow Teeth Model	5	30
Asiga Denta Model 0.05	15	30
Ameralabs AMD 3 LED 0.05	5	30
BlueCast EcoGray 0.05	7	35
BlueCast Kera Master Dental 0.05	7	50
BlueCast LCD-DLP Original 0.05	10	60
BlueCast Phrozen Wax 0.05	16	50
BlueCast S+ 0.05	9	45
BlueCast X5 0.05	9	100
BlueCast X10 0.05	6	100
BlueCast 23LS 0.05	8	50
Monocure 3D Black Rapid Resin 0.05	6	40
Monocure 3D Blue Rapid Resin 0.05	7	40
Monocure 3D Clear Rapid Resin 0.05	8	40
Monocure 3D Grey Rapid Resin 0.05	10	30
Monocure 3D White Rapid Resin 0.05	7	40
3DM-HTR140 (high temperature) 0.05	12	45
Esun Bio-Photopolymer Resin White 0.05	8	30
Esun Standard Resin Black 0.05	7	30
3DM-ABS 0.05	13	25
3DM-BLACK 0.05	20	40
3DM-DENT 0.05	7	45
3DM-HR Green 0.05	15	40
3DM-HR Red Wine 0.05	9	35
3DM-XPRO White 0.05	9	35
3DM-Vulcan Gold 0.05	15	30
FTD Ash Grey 0.05	9	40
Harz Labs Model Resin Cherry 0.05	8	45
Resinworks 3D Violet 0.05	17	30
Resinworks 3D Green 0.05	21	35
Photocentric Hard Grey 0.05	15	30
Photocentric Ash Grey 0.05	10	30
Prusa Beige Super Low Odor 0.05	7.5	35
Prusa Magenta Super Low Odor 0.05	6	35
Prusa Black High Tenacity 0.05	7	35
Prusa Orange-Yellow Teeth Model 0.05	7	30
Prusa Green Dental Casting 0.05	13	50
Prusa Yellow Solid 0.05	7	35
Prusa White Tough 0.05	7.5	35
Prusa Transparent Green Tough 0.05	6	35
Prusa Transparent Red Tough 0.05	6	35
Prusa Maroon Tough 0.05	7.5	35
Prusa Pink Tough 0.05	8	35
Prusa Azure Blue Tough 0.05	8	35
Prusa Transparent Tough 0.05	7	15
Prusa Yellow Flexible 0.05	9	35
Prusa Clear Flexible 0.05	5	15
Prusa White Flexible 0.05	35
Prusa Blue Flexible 0.05	5	15
Prusa Black Flexible 0.05	9	35
Prusa Red Flexible 0.05	9	35
Prusa Clear ABS like 0.05	8	30
Prusa ABS like White 0.05	8	30
Prusa Yellow Jewelry Casting 0.05	13	45
Prusa Grey High Tenacity 0.05	7	30
BlueCast EcoGray 0.1	10	35
BlueCast Kera Master Dental 0.1	13	50
Prusa Pink Tough 0.1	13	45
Prusa Azure Blue Tough 0.1	13	45
Prusa Maroon Tough 0.1	13	45
Prusa White Tough 0.1	13	45
Prusa Transparent Tough 0.1	8	35
Prusa Transparent Green Tough 0.1	7	35

Was this article helpful?

Easy to understand

Solved my problem

Other reason

Comments

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.