日本語
Login
Prusa Research a.s.

1. Preparing the printer

Step 1 of 5 (Chapter 2 of 8)
内容
コメント
Remove the filament from the hotend. It is is necessary to completely remove it from the printer.
If you have loaded the filament, unload it from the hotend. On the screen, navigate to Filament -> Unload Filament.
WARNING: The hotend and heatbed are very HOT. Do not touch these parts!!!
Move the Z-axis down. On the screen, navigate to Control -> Move axis -> Move Z.
Cool down the printer. On the screen, navigate to Preheat -> Cooldown.
Wait until the hot parts are cooled down to ambient temperature. It takes approximately 10 minutes.
Preparing the printer