⬢The FASTENERS A and FASTENERS B bags include an extra spare of each part contained in the bag. The amount of spare parts is always written on the label under the individual part. This number is included in the total number of each type of part.
The amount of the nylon rivet spare might slightly differ, but never less than the amount indicated on the label.
⬢From the experience of building Original Prusa printers, we know that Haribo Bears are an integral and important part of every kit. Although it's not entirely about building a printer now, we've got your safety in mind, and added some amount of gummy bears to your kit as well.
Do not eat the whole bag right at the beginning of the assembly! It is VERY IMPORTANT to distribute the amount correctly during assembly. We tried all sorts of combinations of quantities. Finally, we reached a successful result.
⬢Open the package and arrange the gummy bears according to the picture. Don't eat anything now! Always wait for instructions.
If you’ve purchased any of the add-ons together with the enclosure, read all the chapters on the assembly of the enclosure and the specific add-on first. Some steps must be omitted during the enclosure assembly and proceed with the add-on instruction.
Because there can be possibly tens of different add-on combinations, there is no way to navigate you with a specific add-on installation directly from assembling the enclosure.
If you have a question about something that isn't covered here, check out our additional resources. And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.