JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

9. First flight

9. First flight
Relevant for:
Last updated 12 days ago
9. First flight
 Difficulty
Very easy
 Steps
9
 Available languages
ENCSPLDEESITFR
Z軸とファーストレイヤーキャリブレーション(オプション)
Z軸とファーストレイヤーキャリブレーション(オプション)
Z軸とファーストレイヤーキャリブレーション(オプション)
IMPORTANT: This step is necessary only in case you have adjusted the position of the SuperPINDA sensor in the previous chapter. Otherwise, you can skip to the next step and use the Live Adjust Z function as usual to fine-tune the first layer.
Go to LCD Menu - Calibration - Calibrate Z.
ファーストレイヤーキャリブレーションの記事を参照して、手順に従ってください。
Loading a sample G-code to the printer
Loading a sample G-code to the printer
Loading a sample G-code to the printer
As a first print please print the Sheep, which is pre-sliced and tested. In case of any issues, it will make troubleshooting much easier.
Visit our PrusaPrinters.org profile to download a pre-sliced G-code for your printer.
Or go to the folder Prusa3D/Sample objects/MMU2(s) via the link on your desktop. The link installs together with a full installation of the PrusaSlicer.
load the PLA_Sheep_200um G-code to SD card and insert the card into your printer.
Start the print
Start the print
Start the print and wait until it is finished. In the meantime you can take a look in the printed Handbook (included in the package).
If you are having any issues while printing, see our troubleshooting articles such as the MMU needs user attention.
Join PrusaPrinters!
Join PrusaPrinters!
Join PrusaPrinters!
Join PrusaPrinters!
最大のPrusaコミュニティにぜひ参加してください! お使いのプリンタに合わせた STL または Gコード の最新モデルをダウンロードすることができます。登録はこちら。 [https://www.prusaprinters.org | PrusaPrinters.org]
新しいプロジェクトのインスピレーションが必要な時は、ぜひ毎週更新されるブログをご覧ください。
組み立てにヘルプが必要な場合には、フォーラムの素晴らしいコミュニティをご利用ください :-)
All Prusa services share one account.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us