EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Original Prusa SL1S SPEED

Troubleshooting

Articles

Sample G-codes

Sample G-codes

Troubleshooting > Print Quality Troubleshooting
Print doesn't appear / Resin does not solidify

Print doesn't appear / Resin does not solidify

Troubleshooting > Print Quality Troubleshooting
Broken supports (SL1/SL1S)

Broken supports (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
First layer does not stick (SL1/SL1S)

First layer does not stick (SL1/SL1S)

Troubleshooting > Printer troubleshooting
Print detached from supports (SL1/SL1S)

Print detached from supports (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
QR Error codes

QR Error codes

Troubleshooting > Print Error Messages
Removing and object stuck to the bottom of the tank

Removing and object stuck to the bottom of the tank

Troubleshooting > Print Quality Troubleshooting
Skewed / deformed prints (SL1/SL1S)

Skewed / deformed prints (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
Prints breaking away from the platform

Prints breaking away from the platform

Troubleshooting > Print Quality Troubleshooting
Visible layers (SL1/SL1S)

Visible layers (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
Scratches/bubbles on prints (SL1/SL1S)

Scratches/bubbles on prints (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
Loud noises from printer (SL1/SL1S)

Loud noises from printer (SL1/SL1S)

Troubleshooting > Printer troubleshooting
Holes in print (SL1/SL1S)

Holes in print (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
De-lamination / separated layers (SL1/SL1S)

De-lamination / separated layers (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
Warped layers (SL1/SL1S)

Warped layers (SL1/SL1S)

Troubleshooting > Print Quality Troubleshooting
Missing parts (SL1/SL1S)

Missing parts (SL1/SL1S)

Troubleshooting > Printer troubleshooting
Object missing details

Object missing details

Troubleshooting > Print Quality Troubleshooting
Saving log file (SL1/SL1S)

Saving log file (SL1/SL1S)

Troubleshooting > Printer troubleshooting
Tilt homing failed #10101 (SL1/SL1S)

Tilt homing failed #10101 (SL1/SL1S)

Calibration > Calibration Error Messages
Resin sensor error #10307 (SL1/SL1S)

Resin sensor error #10307 (SL1/SL1S)

Troubleshooting > Printer troubleshooting
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us