• Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語

Auto-arrange tool

This article is also available in following languages: 

When you import multiple models or create many instances of the same model, arranging them on the print bed could be very time-consuming. PrusaSlicer features an auto-arrange tool that distributes the objects over the entire Print bed with a reasonable gap between them. Auto-arrange can be initiated either by hitting the A key or by picking the Auto-arrange from the top toolbar.

Partial arrangement

The Auto-arrange tool can be used to arrange only a subset of the objects on the bed while keeping the position of unselected objects unchanged. This can be achieved by selecting the set of objects and hitting the Arrange button while holding down the Shift key, or pressing the Shift + A hotkey.

Customizable gap and automatic rotation

Starting with PrusaSlicer 2.3, right-clicking the Auto-arrange icon in the top toolbar opens a dialog to tune the distance between objects and to allow rotation of objects around their Z-axis during the arrangement. As a result, you’ll be able to fit more parts on the build plate.

You can either use the slider to set the spacing or enter an exact value by Ctrl+Left mouse button clicking into the text field.

The current spacing and rotation settings also affect the Fill bed with instances function.

Was this article helpful?


Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us