- Čeština
- Italiano
- Deutsch
- Polski
- Français
- Home
- Troubleshooting
- Print Quality Troubleshooting
- Sample G-codes
Sample G-codes
- Print Quality Troubleshooting
- Bad looking surface above supports
- Broken supports (SL1/SL1S)
- De-lamination / separated layers (SL1/SL1S)
- Failing supports
- Firmware update failed #10534 (SL1)
- First layer issues
- Ghosting
- Holes in print (SL1/SL1S)
- Layer separation and splitting FDM
- Layer shifting
- Object missing details
- Poor bridging
- Print detached from supports (SL1/SL1S)
- Print doesn't appear / Resin does not solidify
- Prints breaking away from the platform
- Problems with infill
- Removing and object stuck to the bottom of the tank
- Sample G-codes
- Original Prusa FFF Series
- Original Prusa SLA Series
- Prusa Pro FFF Series
- Scratches/bubbles on prints (SL1/SL1S)
- Skewed / deformed prints (SL1/SL1S)
- Stringing and oozing
- Temperature sensor failed #10205 (SL1/SL1S)
- The Benchy hull line
- Under-extrusion
- Visible layers (SL1/SL1S)
- Warped layers (SL1/SL1S)
- Warping
- Watertight prints
- QR Error codes
- Printer troubleshooting
- Print Error Messages
Each Original Prusa printer is shipped with a bundle of sample G-codes. These G-codes are tested and tailored specifically for your printer model and can be used either to see the printer capabilities or for troubleshooting.
Find your printer in the table and download the zip archive. Both the model geometry (.stl/.3mf) and the presliced version (.gcode) are included.
Original Prusa FFF Series
| Printer model | Printer type | 3D models | G-codes |
| MK4/MK3.9 | FFF | link | link* |
| MK3.5 | FFF | TBA | TBA |
| MK3S+ | FFF | link | link |
| MK3S | FFF | link | link |
| MK3 | FFF | link | link |
| MK2.5S | FFF | TBA | TBA |
| MK2.5 | FFF | TBA | TBA |
| MINI+ | FFF | link | link |
| MINI | FFF | link | link |
| XL 1T | FFF | link | link |
| XL 2T | FFF | link | link |
| XL 5T | FFF | link | link |
| MMU3 | FFF | link | link |
| MMU2S & MK3S/+ | FFF | link | link |
| MMU2S & MK2.5S | FFF | link | link |
| MMU2 & MK3 | FFF | link | link |
| MMU2 & MK2.5 | FFF | link | link |
| MMU1 & MK2 | FFF | link | link |
*The archive includes G-codes for both MK4 and MK3.9 printers. G-codes are sliced for Input Shaper and older non-Input Shaper firmware. To print the Input Shaper G-codes, please make sure your printer is running firmware 5.0.0 or newer.
Original Prusa SLA Series
| Printer model | Printer type | 3D models | G-codes |
| Original Prusa SL1S | MSLA | link | link |
| Original Prusa SL1 | MSLA | link | link |
Prusa Pro FFF Series
| Printer model | Printer type | 3D models | G-codes |
| Prusa Pro HT90 | FFF | TBA | link |
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.