Original Prusa i3 MK3S+ kit assembly (v3.26)

Note: the screwdriver included is a JIS screwdriver, not a Phillips. The only screws it's used on (the PSU terminals) are also JIS. You can tell, because they each have a dot on them. But keep this in mind since using it on Phillips screws in other projects may strip them.

Hi Guys.After 10 years of creating and building my own 3D Printers, I have finally purchased one. The limited edition i3.Purchase and Delivery process. Exceptional. Excellent comms from all involved.Packing and Unboxing experience. Ecxeptional.Assembly overall. An amazing experience. Really enjoyed the build.Comissioning. Completed in 1/2 hr end to end. I'm printing already.Notes:Holding M3 nuts with pliers is just pants. Please can you consider a 5.5mm Spanner/Wrench in the Tool kit.Manual is very very good, but could use better images on the Wiring and Connections throughout. Maybe rather than Photo's you can use some Wiring Drawings.All round experience - Amazing.Thank you to all involved.Alexaka ParCan

Hi Guys.After 10 years of creating and building my own 3D Printers, I have finally purchased one. The limited edition i3.Purchase and Delivery process. Exceptional. Excellent comms from all involved.Packing and Unboxing experience. Ecxeptional.Assembly overall. An amazing experience. Really enjoyed the build.Comissioning. Completed in 1/2 hr end to end. I'm printing already.Notes:Holding M3 nuts with pliers is just pants. Please can you consider a 5.5mm Spanner/Wrench in the Tool kit.Manual is very very good, but could use better images on the Wiring and Connections throughout. Maybe rather than Photo's you can use some Wiring Drawings.All round experience - Amazing.Thank you to all involved.Alexaka ParCan

Hi Guys.After 10 years of creating and building my own 3D Printers, I have finally purchased one. The limited edition i3.Purchase and Delivery process. Exceptional. Excellent comms from all involved.Packing and Unboxing experience. Ecxeptional.Assembly overall. An amazing experience. Really enjoyed the build.Comissioning. Completed in 1/2 hr end to end. I'm printing already.Notes:Holding M3 nuts with pliers is just pants. Please can you consider a 5.5mm Spanner/Wrench in the Tool kit.Manual is very very good, but could use better images on the Wiring and Connections throughout. Maybe rather than Photo's you can use some Wiring Drawings.All round experience - Amazing.Thank you to all involved.Alexaka ParCan

Hi Guys.After 10 years of creating and building my own 3D Printers, I have finally purchased one. The limited edition i3.Purchase and Delivery process. Exceptional. Excellent comms from all involved.Packing and Unboxing experience. Ecxeptional.Assembly overall. An amazing experience. Really enjoyed the build.Comissioning. Completed in 1/2 hr end to end. I'm printing already.Notes:Holding M3 nuts with pliers is just pants. Please can you consider a 5.5mm Spanner/Wrench in the Tool kit.Manual is very very good, but could use better images on the Wiring and Connections throughout. Maybe rather than Photo's you can use some Wiring Drawings.All round experience - Amazing.Thank you to all involved.Alexaka ParCan