Original Prusa XL electronics
Relevant for
XL
Article is also available in following languages
Relevant for
The Original Prusa XL is equipped with multiple electronic boards. The number of boards depends on the number of tools.
The slots on the electronic boards have a label near them indicating the component to connect to each slot.
The Sandwich board is the main board with PCIe slots for other boards (e.g. XLBuddy), as well as connectors for many of the printer components, including motors, tool heads, LCD, and others.
The XLBuddy board is the main control board of the printer. It is slotted into the sandwich board. The antenna cable is connected to it.
The five-head version of the XL is equipped with the XL Splitter board. The Dwarf boards for Nextruders 3, 4, and 5 are connected to it. The board is slotted into the Sandwich board.
Each tool is equipped with its own control board, the Dwarf board. An XL printer has as many Dwarf boards as there are tools. All the components that control each Nextruder are connected to its respective Dwarf board.
On multi-tool versions of the Original Prusa XL (dual-head, five-head) each tool is equipped with its own Cheese board. This includes a circuit board, 3 hexagonal positioning pins, 2 carrying pins, and 2 nozzle LEDs.
The Cheese board is part of the Tool Changer mechanism. Once the pins are removed, we are left with the Cheese board. Below is a drawing of the Cheese board from the rear and the front.
The Modular bed board is located under the heatbed, and controls the heatbed and its tiles. All heatbed segments are plugged into this board.
1 comment
Thanks in advance
Hello. Sorry, this port is only for data in.
Thank You,
Matthew