1. Nářadí potřebné k této kapitole

Prusa CORE One kit assembly (INTERNAL) [Překládá se] (1.00)

• 1. Úvod
• 2. Base assembly
• 3. Back assembly
• 4. Heatbed assembly
• 5. CoreXY assembly [Překládá se]
  1. Nářadí potřebné k této kapitole
  2. Rod holders: parts preparation
  3. Assembling the rod holders
  4. Preparing the front rod holders
  5. Installing the front rod holders
  6. XY carriage: parts preparation
  7. Assembling the XY-carriages
  8. Assembling the linear holder left
  9. Assembling the linear holder right
  10. Attaching the linear holder assemblies
  11. Smooth rods INFO
  12. Mounting the smooth rods
  13. Securing the rear rod holders
  14. Securing the front rod holders
  15. Motor mounts: parts preparation
  16. Motor mounts: part preparation
  17. Assembling the XY-motor-mount-right I.
  18. Assembling the XY-motor-mount-right II.
  19. Assembling the XY-motor-mount-left I.
  20. Assembling the XY-motor-mount-left II.
  21. Belt tensioners: parts preparation I.
  22. Belt tensioners: parts preparation II.
  23. Assembling the belt tensioner left I.
  24. Assembling the belt tensioner left II.
  25. Assembling the belt tensioner right
  26. Installing the belt tensioners: parts preparation
  27. Installing the motor mount right
  28. Installing the motor mount left
  29. Installing the belt-tensioner-left
  30. Installing the belt-tensioner-right
  31. Linear rail: parts preparation
  32. Attaching the linear rail
  33. Securing the linear rail
  34. Installing the linear rail: parts preparation
  35. Installing the linear rail assembly
  36. Linear rail: removing the safety pins
  37. Bed-stop: parts preparation
  38. Assembling the bed-stop
  39. Mounting the bed-stop
  40. X&Y motors: parts preparation
  41. Installing the X-axis pulley
  42. Installing the Y-axis pulley
  43. XY belts: parts preparation
  44. XY belts INFO
  45. Y belt guiding: Y motor pulley
  46. Securing the Y-axis motor
  47. Y belt guiding: Y motor mount
  48. Y belt guiding: belt tensioner
  49. Y belt guiding: X motor mount
  50. Y belt guiding: securing the belt
  51. X belt guiding: X motor pulley
  52. Securing the X-axis motor
  53. Y belt guiding: X motor mount
  54. X belt guiding: belt tensioner
  55. X belt guiding: Y motor mount
  56. X belt guiding: securing the belt
  57. Checking the belt guidance
  58. Bowden guide: parts preparation
  59. Securing the Y motor cable
  60. Securing the X motor cable
  61. Installing the bowden guide
  62. Securing the Nextruder holder
  63. Bílý LED pásek: příprava dílů
  64. Sticking the White LED strip
  65. Installing the white LED assembly
  66. Door sensor & White LED strip: parts preparation
  67. Inserting the zip ties
  68. Installing the door sensor
  69. Securing the door sensor cable
  70. Guiding the cables: LED and door sensor
  71. Smooth rods: parts preparation
  72. Instalace sestavy CoreXY
  73. Securing the smooth rods
  74. Aligning the linear rail
  75. Guiding the corexy cables
  76. Guiding the cooling fan cables
  77. Fixing the bed-stop
  78. Connecting the cooling fans cables
  79. Connecting the corexy cables
  80. Haribo time
  81. Done
• 6. Nextruder assembly
• 7. Bodywork & Electronics
• 8. Trim, Door & xLCD
• 9. Kalibrace & První spuštění
• Manual changelog