It's important to have all mechanical parts of the printer perfectly assembled and keep pulley drive clean.
⬢Use following links covering most common problems :
EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- 日本語
- Home
- MMU1
- Troubleshooting
- Printer troubleshooting
- General troubleshooting MMU1
General troubleshooting MMU1
Menu
- Printer troubleshooting
- General troubleshooting MMU1
- 1. Mechanical condition
- 2. Temperature and filaments
- Multi Material Post Processor Troubleshooting
- Multiplexer
- Filament pulleys MMU1
- Unable to unload filament MMU1
General troubleshooting MMU1
Relevant for:
Last updated 2 years ago Difficulty
Moderate Steps
2 Available languages
⬢Filament printing temperature plays important role in switching filament process.
⬢As general rule, start with recommended temperature or temperature, which is giving you the best results. In case of problems, first try lower temperature - lower temperature by 5°C steps
⬢Check for filament recommendation in our Multi Material Handbook: prusa3d.com/downloads/manual/prusa3d_manual_mk2mm_en.pdf
⬢Print profiles are part of the drivers package: prusa3d.com/drivers
⬢In case of other questions, please see Prusa Knowledge base: help.prusa3d.com
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.