1. Begin assembly

Printer maintenance

• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
• How to replace the xBuddy board (CORE One)
• How to replace Hotend fan (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• How to replace X and Y Motors (CORE One)
• How to replace the print fan (CORE One)
• How to replace the Heatbed Power Cables (CORE One)
• How to replace the Chamber fan (CORE One)
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One)
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
• How to replace Loveboard (CORE One)
• How to replace a hotend assembly (CORE One)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this guide
  4. Printer Preparation (Part 1)
  5. Printer Preparation (Part 2)
  6. Top Cover Removal
  7. Heatbed Protection
  8. Nextruder Uncovering
  9. Cables Disconnecting
  10. Hotend Assembly Removal
  11. Hotend Assembly Parts Preparation
  12. Hotend Insertion
  13. Nozzle Insertion Check
  14. Hotend Cables Guidance
  15. Cables Connection
  16. Nextruder Cover
  17. Top Cover
  18. Turning the Printer On
  19. Nozzle Set Up
  20. Final check
• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)