1. Begin assembly

Printer maintenance

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the Advanced Filtration (CORE One L)
• How to replace the Buddy3D camera cable (CORE One L)
• How to replace a Hotend Heater (CORE One L)
  1. Begin assembly
  2. Introduction
  3. Tools necessary for this guide
  4. Printer preparation (part 1)
  5. Printer preparation (part 2)
  6. Removing the printer top cover
  7. Protecting the heatbed
  8. Accessing the hotend cables
  9. Disconnecting the hotend cables
  10. Removing the hotend assembly
  11. Silicone Sock Removal
  12. Heater Removal
  13. Heater Preparation
  14. Heater Assembly
  15. Inserting the hotend
  16. Connecting the hotend cables
  17. Guiding the hotend cables
  18. Attaching the Printhead-cover-left
  19. Attaching the printer top cover
  20. Turning the printer on
  21. Final check
• How to replace a Heatsink Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace the White LED strip (CORE One L)
• How to pack CORE One L for return
• How to replace the heatbed fans (CORE One L)
• How to replace the heatbed (CORE One L)
• How to replace the AC box (CORE One L)