1. Begin assembly

Prusa Connect & PrusaLink

• Installing Wi-Fi and PrusaLink (MINI/+)
  1. Begin assembly
  2. Introduction
  3. Purchasing Wi-Fi (ESP) module
  4. Tools necessary for this guide
  5. Opening the electronics
  6. Checking the electronics
  7. Removing the power switch
  8. Removing the power switch
  9. Installing the ESP module: parts preparation
  10. Installing the ESP module
  11. Connecting the power switch
  12. Covering the electronics
  13. Downloading the firmware
  14. Flashing new firmware
  15. Flashing new bootloader and firmware
  16. Continue to Wifi and PrusaLink setup
  17. Setting up the Wi-Fi module (FW4.4.x)
  18. Setting up the Wi-Fi module
  19. Setting up the Wi-Fi module
  20. Editing the configuration file
  21. Editing the configuration file (PrusaSlicer)
  22. Editing the configuration file (text editor)
  23. Finishing the Wi-Fi settings
  24. Wi-Fi part is done!
  25. Getting the IP and API-key
  26. Printing using PrusaLink
  27. PrusaLink info
• Wi-Fi and Prusa Connect/Link setup (CORE One, MK4/S, MK3.9, MK3.5, XL, MINI/+)
• Adding the printer to Prusa Connect (CORE One, MK4/S, MK3.9/S, MK3.5/S, XL, MINI/+)
• Camera setup for PrusaLink / Prusa Connect
• Prusa Connect - Telegram notifications setup
• Prusa Connect - Discord notifications setup
• Prusa Connect - Slack notifications setup
• ESP Camera for Prusa Connect