EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

Printing on MK3/S/+ via PrusaLink

Menu

Printing on MK3/S/+ via PrusaLink

Printing on MK3/S/+ via PrusaLink
Last updated 2 months ago
Printing on MK3/S/+ via PrusaLink
 Difficulty
Easy
 Steps
4
 Available languages
CSPLDEJAESITFR

Step 1 Opening up PrusaLink

Opening up PrusaLink
Opening up PrusaLink
⬢In this guide, we are working with MK3S+ printer. For MK4 printer, follow this guide instead.
⬢Check the printer physically if it's on and ready to print.
⬢Insert the IP Address of your printer into a web browser to open up PrusaLink.
⬢

PrusaLink site will open up.  Log in.

Remember, in case of MK3/S/+, there is the printer-specific PrusaLink Login, not your Prusa Account.
In order to send files to PrusaLink directly, you have to be connected to the same local network as the printer. The other way is to use VPN.

Step 3 Starting the print

Starting the print
Starting the print
Starting the print
Starting the print
⬢Make sure the printer is ready to print.
⬢Visit the Projects tab.
⬢In the desired project file, select Start Print
⬢Verify the printer is ready to print. Check that the print sheet is clean, degreased and empty. Your printer will start printing after you hit the Confirm button.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us