1. Begin assembly

Prusa Connect & PrusaLink

• PrusaLink and Prusa Connect setup (MK3/S/+)
  1. Begin assembly
  2. Introduction
  3. Parts preparation: Raspberry Pi Zero W
  4. Printing new parts
  5. Printing new parts: Einsy-cover compatibility
  6. GPIO header preparation
  7. Preparing and checking the GPIO header
  8. Soldering the GPIO header
  9. Preparing necessary software
  10. Setting up the SD card in Pi Imager
  11. Setting up the SD card in Pi Imager 2
  12. Setting up the printer
  13. Inserting the Raspberry Pi Zero W
  14. Setting the printer up
  15. Setting the printer up
  16. Prusa Connect Log in
  17. Opening up PrusaLink Wizard
  18. PrusaLink Wizard - Credentials
  19. PrusaLink Wizard - Printer Info
  20. PrusaLink Wizard - Recap
  21. Adding the printer into Prusa Connect
  22. Printing a file from PrusaLink
  23. Printing a file from Prusa Connect
  24. Prusa Connect file management
  25. You are set!
• PrusaLink / Prusa Connect with RPi 3/4 USB (MK2.5/S MK3/S/+)
• Camera setup for PrusaLink / Prusa Connect
• Prusa Connect - Telegram notifications setup
• Prusa Connect - Discord notifications setup
• Prusa Connect - Slack notifications setup
• How to update PrusaLink (MK2.5/S MK3/S/+)
• Sending files from PrusaSlicer to PrusaLink
• Printing on MK3/S/+ via PrusaLink
• ESP Camera for Prusa Connect