SL1S

<div>
<h3 dir="ltr">安定したリリース</h3>
<p dir="ltr">PrusaSlicerの最新の安定版リリースは、常に <a href="https://www.prusa3d.com/drivers/">DRIVERS &amp; APPSパッケージ</a> にあり、Windows、Mac OS X、およびLinuxで利用できます。パッケージにはテストオブジェクトとプリンタードライバーも含まれていますが、PrusaSlicerのみのインストールを選択することができます。</p>
<p><a href="https://www.prusa3d.com/page/prusaslicer_424/">PrusaSlicerのイントロダクションとダウンロード</a>または<a href="https://github.com/prusa3d/PrusaSlicer/releases">私たちのGitHub</a>から、コンピューターのスタンドアロンインストーラーをダウンロードすることもできます。</p>
<p>安定版リリースとは、可能な限り徹底的にテストされ、多数の公開アルファバージョンおよびベータバージョンを経たバージョンです。</p>
<h3 dir="ltr">アルファとベータリリース</h3>
<p dir="ltr">PrusaSlicerの急速な開発ペースについていきたいですか？開発ビルドには、最新の機能とバグ修正が含まれています。ただし、不安定になったり、クラッシュしたり、予期しない動作をしたりする可能性があります。本番環境で開発ビルドを使用することはお勧めしません。ダウンロードと詳細については、<a href="https://github.com/prusa3d/PrusaSlicer/releases">私たちのGitHub</a> を確認してください。<br />ほとんどのコンピューターにPrusaSlicerをインストールする方法については、記事<a href="http://help.prusa3d.com/ja/article/install-prusaslicer_1903">PrusaSlicerのインストール</a>を参照してください。</p>
</div>


PrusaSlicerのダウンロード

レイヤーと外周

サポート材

<h3>PrusaSlicer マニュアルへようこそ</h3>
<p>PrusaSlicer (旧称：Slic3r Prusa EditionまたはSlic3r PE) は、オープンソースプロジェクト<strong><a href="https://slic3r.org/">Slic3r</a></strong> をベースにした自社開発のスライサーソフトウェアです。PrusaSlicerは、オープンソースで、機能が豊富で、また頻繁に更新されているツールです。</p>
<p>PrusaSlicerは、<a>Windows, Mac and Linux</a> に対応しています。</p>
<h3>歴史</h3>
<p>Slic3rプロジェクトは、<strong>Alessandro Ranellucci</strong> のリーダーシップのもと、成長を続ける3Dプリント技術にオープンソースのスライサーを提供する取り組みとして、2011年にRepRapコミュニティ内で誕生しました。Slic3rはすぐにユーザーの間に広まり、Josef Prusaが Original Prusa プリンター用の主要なスライシングソフトウェアを探していたとき、このSlic3r が選ばれました。Slic3r はオープンソースで、現在もそうですが、当時非常にパワフルなソフトウェアでした。</p>
<p style="text-align: center;"><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.helpdev.prusa3d.com/en/wp-content/uploads/jo_and_allesandro.png" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/jo_and_allesandro-300x170.png 300w, /wp-content/uploads/jo_and_allesandro-600x341.png 600w, /wp-content/uploads/jo_and_allesandro-768x436.png 768w, /wp-content/uploads/jo_and_allesandro-800x454.png 800w" alt="" width="421" height="239" /><em>Jo and Alessandro in 2012 (<a href="https://www.youtube.com/watch?v=Tuxg2L7r1oI">video interview</a>)</em></p>
<p>しかし、Prusa Researchが非常に非常に早いスピードで成長するにつれ、スライシングソフトウェアの開発をより柔軟に行う必要がありました。ソフトウェアに変更を加える必要があり、その変更は早急に行われなければならず、また、より多くの機能を追加する必要もありました。この時点で、切り離されたオリジナルのSlic3rチームとの協力関係は維持できず、結局は、私たちでオリジナルのSlic3rプロジェクトのフォークを設立することにしました。</p>
<p>Slic3r Prusa Editionは、2016年11月に発売されました - 発売の詳細は<a href="https://blog.prusaprinters.org/introducing-slic3r-prusa-edition/">こちら</a>をご覧ください。専任のSlic3r PE開発者チームが設立され、新機能がどんどん追加されていきました。これらの変化は2019年5月に結実し、UIを大幅に刷新した新バージョンを<a href="https://blog.prusaprinters.org/prusaslicer-2-release/">PrusaSlicer2.0</a>という新しい名前でリリースしました。</p>
<p>なぜ名前を変えたのか？まず第一に、以前の名前は本当に紛らわしいものでした。自分たちの資料でも「PE」という接尾語をつけないことが多く、コミュニティでは Slic3r と Slic3r PE をほぼ同じ意味で使っていました。新しいユーザーは、Slic3r を誤ってダウンロードし、「3D Printing Handbook」に掲載されているスクリーンショットとは違って見えることや、自分のPrusaプリンタ用に設定されていないことを不思議に思うかもしれません。オリジナルの Slic3r について言えば、Slic3r PE はアップデートのたびに、オリジナルのコードからどんどん離れていきました。私たちは Perl のソースコードをすべて C++ に書き換え、特に2.0のアップデートでは、あまりにも多くの違いがあったため、名前をより明確にすることが適切だと考えました。</p>
<p>もちろん、オープンソースであり、 <a href="https://github.com/prusa3d/PrusaSlicer">GitHub</a> ですべてを見ることができます。そして、私たちのスライサーが <strong><a href="https://slic3r.org/">Alessandro Ranellucci</a></strong> によって書かれたオリジナルのプロジェクトをベースにしていることを、私たちは今でも誇りに思っています。現在、両プロジェクトは楽しく共存しており、新機能は頻繁にマージされています。</p>


概要情報

<h3>EU内の注文</h3>
<p>2021年7月1日より、EUのB2C取引に関する付加価値税（VAT）のルールが更新されます。したがって、製品が発送される国/州で設定された標準税率の付加価値税（VAT）を請求します。</p>
<div class="tip-callout">EUのVATルールに関する詳細は、<a href="https://ec.europa.eu/taxation_customs/business/vat/vat-e-commerce_en/">公式文書</a>をご覧ください。各EU国の税率は<a href="https://europa.eu/youreurope/business/taxation/vat/vat-rules-rates/index_en.htm#shortcut-8">こちらに記載されています</a>。</div>
<p style="text-align: center;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2022/01/total-with-tax.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2022/01/total-with-tax-300x50.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2022/01/total-with-tax.jpg 1600w" alt="" width="400" height="66" loading="lazy" /></p>
<p style="text-align: center;"><em>チェックアウト時に、VAT額（税）を含む価格と含まない価格の両方が表示されます</em></p>
<h4>ビジネス間取引（B2B）</h4>
<p>有効なEU VAT番号をお持ちの場合、VATなしで請求書を受け取ることができます。「会社として購入しています」というオプションを選択し、<strong>識別番号</strong>と<strong>EU VAT番号</strong>を入力してください。VAT番号の有効性は常に<a href="http://ec.europa.eu/taxation_customs/vies/">VIES VAT番号検証エンジン</a>によって確認されます。</p>
<p>すべてのフィールドを正しく入力し、注文の合計金額にVATが含まれていないことを確認してください。すべての情報が正しく入力されているにもかかわらずシステムがエラーを表示する場合は、<a href="http://ec.europa.eu/taxation_customs/vies/">VIES VAT番号検証システム</a>がオンラインであることを確認するか、<a href="https://www.prusa3d.com/">LiveChat</a>にお問い合わせください。</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="http://help.prusa3d.com/wp-content/uploads/2022/01/eshop-vat.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2022/01/eshop-vat-600x177.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2022/01/eshop-vat-300x89.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2022/01/eshop-vat-768x227.jpg 768w, http://help.prusa3d.com/wp-content/uploads/2022/01/eshop-vat.jpg 1600w" alt="" width="500" height="148" loading="lazy" /></p>
<p style="text-align: center;"><em><strong>VAT番号は上記画像に示された形式で記入する必要があります</strong>。そうでない場合、システムによって考慮されません。</em></p>
<h4>ビジネス間取引（B2B）のVAT返金</h4>
<p>VAT込みで支払われた注文の場合、eショップを通じて注文から税金のみを返金することはできません。注文が発送されていない場合は、発送前に注文をキャンセルできます。全額返金を受け取り、新たに税金なしで注文することができます。注文がすでに発送されている場合は、お住まいの国で返金を依頼することが可能です：</p>
<ul>
<li><a href="https://ec.europa.eu/taxation_customs/vat-refunds_en">税務および関税連合</a></li>
<li><a href="https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32008L0009&amp;qid=1436536731847">文書情報</a></li>
</ul>
<h3>EU外への注文</h3>
<div class="note-callout">EU - 英国貿易協力協定（TCA）により、チェコ共和国から英国への出荷には関税は適用されません。ただし、合計135ポンド以上の注文には英国入国時にVAT（税）が課されます。詳細については<a href="http://help.prusa3d.com/ja/article/orders-to-the-uk_205772">Orders to the UK [進行中の翻訳]</a>をご覧ください。</div>
<p>EU諸国から非EU諸国へ3Dプリンターを輸入する際には、購入価格以外にも多くの費用が発生します。注文時には製品と配送以外の料金は含まれていません。料金は製品が国内の税関に到着した際に請求されます。送料、関税、通関業者、税金、保険、および追加料金を考慮して総費用を正確に見積もることが重要です。これらの費用は目的地の国、HSコード、および配送方法によって異なります。</p>
<p>異なる製品には異なる<strong>HS（調和システム）コード</strong>があります。これらは国際的に一貫性を持たせるために設計されており、最初の6桁は世界税関機構（WCO）によって標準化されています。この6桁は商品を分類し関税率を決定するために普遍的に使用されており、すべての国が同じ方法で製品を認識できるようになっています。しかし、この6桁以降は各国が特定のニーズに応じてコードを8桁または10桁まで拡張することができます。</p>
<p>通関手続きは顧客側で行う必要がありますが、その際には運送業者から提供される通関業者の助けを得ることになります（<a href="https://en.wikipedia.org/wiki/Incoterms#DAP_%E2%80%93_Delivered_At_Place_(named_place_of_destination)">DAPインコタームズ</a>）。</p>
<h4>HSコード</h4>
<table class="striped" style="width: 100%; height: 231px;">
<tbody>
<tr style="height: 21px;">
<th style="width: 48.8358%; height: 21px;">製品タイプ</th>
<th style="width: 48.8358%; height: 21px;">HSコード</th>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">すべてのプリンター</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">84852000</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">スペアパーツ（MMUとCW1/Sを含む）</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">84859090</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">フィラメント</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">39169090</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">樹脂</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">39073000</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">消火システム</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">8424100090</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">プリントされた本、パンフレット、リーフレット</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">4901990000</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">Tシャツ（グッズ）</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">6109100010</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">パーカー（グッズ）</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">6110209900</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">ビーニー（グッズ）</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">6505009090</td>
</tr>
<tr style="height: 21px;">
<td style="width: 48.8358%; height: 21px; text-align: center;">スナップバック（グッズ）</td>
<td style="width: 48.8358%; height: 21px; text-align: center;">6505003000</td>
</tr>
</tbody>
</table>
<h4>輸入関税と税金を計算する場所</h4>
<table class="striped" style="width: 100%;">
<tbody>
<tr style="height: 21px;">
<th style="width: 66.8712%; height: 21px;">国</th>
<th style="width: 33.1288%; height: 21px;">0手数料限度額</th>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 21px;"><a href="https://www.cbp.gov/">アメリカ合衆国 (USD)</a></td>
<td style="width: 33.1288%; text-align: center; height: 21px;">800</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 42px;"><a href="https://www.cbsa-asfc.gc.ca/travel-voyage/dte-acl/est-cal-eng.html">カナダ</a> (CAD)</td>
<td style="width: 33.1288%; text-align: center; height: 42px;">20</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 21px;"><a href="https://www.bazg.admin.ch/bazg/en/home/services/services-companies/services-firmen_einfuhr-ausfuhr-durchfuhr/zolltarif-tares.html">スイス (CHF)</a></td>
<td style="width: 33.1288%; text-align: center; height: 21px;">0</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 21px;"><a href="https://gstcalculator.com.au/">TEXT</a>オーストラリア (AUD)]</td>
<td style="width: 33.1288%; text-align: center; height: 21px;">1000</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 42px;"><a href="https://www.toll.no/no/verktoy/importkalkulator/">ノルウェー</a> (NOK)]</td>
<td style="width: 33.1288%; text-align: center; height: 42px;">6000</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 42px;"><a href="https://www.customs.go.kr/english/ad/ct/CustomsTariffList.do?mi=8037">韓国</a> (USD)]</td>
<td style="width: 33.1288%; text-align: center; height: 42px;">150</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 63px;"><a href="https://shaarolami-query.customs.mof.gov.il/CustomspilotWeb/PersonalImportTax">イスラエル</a> (USD)</td>
<td style="width: 33.1288%; text-align: center; height: 63px;">75</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 42px;"><a href="https://www.customs.govt.nz/personal/duty-and-gst/whats-my-duty-estimator/">ニュージーランド (NZD)</a></td>
<td style="width: 33.1288%; text-align: center; height: 42px;">1000</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 21px;"><a href="https://www.customs.gov.sg/">シンガポール (SGD)</a></td>
<td style="width: 33.1288%; text-align: center; height: 21px;">400</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 21px;"><a href="https://www.customs.go.th/">タイ (THB)</a></td>
<td style="width: 33.1288%; text-align: center; height: 21px;">1500 (~45 USD)</td>
</tr>
<tr style="height: 42px;">
<td style="width: 66.8712%; text-align: center; height: 21px;"><a href="https://www.customs.go.jp/">日本 (JPY)</a></td>
<td style="width: 33.1288%; text-align: center; height: 21px;">10000</td>
</tr>
</tbody>
</table>


VAT (付加価値税) および通関手数料

Růženka Upgrade Final [進行中の翻訳]

Original PrusaSL13Dプリンターは、MSLAプリントプロセスに基づいています。 Original Prusa i3マシンとは異なり、このプリンターは高解像度LCDパネルとUV LEDを使用してレジンの薄層を硬化し、前例のないレベルの精細さを実現します。

Original Prusa SL1キット組立て

組立てガイド

キャリブレーション中にプリンターがエラーメッセージ発した場合の対処方法。

キャリブレーションエラーメッセージ

パーフェクトプリントを実現するための、3Dプリンターを調整する方法を学ぶために知っておく必要のあるすべての情報。

キャリブレーション

プリンターの説明

プリンターの機能

shop.prusa3d.comで購入する前または後に興味があるかもしれないFAQおよび他の有用な情報

一般情報

3Dプリンターとその機能の基本的な概要に加えて、PrusaResearchの一般的な情報。

あなたのプリンターについて

材料ガイド

プリンターメンテナンス

Prusa Connect [進行中の翻訳]

このセクションでは、材料ガイド、プリンタのトラブルシューティング、およびプリンタの使用に関する一般的な情報を見つけることができます。

このプリンターを使用

プリント品質のトラブルシューティング

QR Error codes [進行中の翻訳]

プリンタートラブルシューティング

プリントエラーメッセージ

Description of how to recognize and solve common problems, especially hardware and electronics related. [進行中の翻訳]

Troubleshooting [進行中の翻訳]

About [進行中の翻訳]

General [進行中の翻訳]

User interface [進行中の翻訳]

入力/出力

左ツールバー

トップツールバー

プリント設定

PrusaSlicer printer settings [進行中の翻訳]

Printer settings [進行中の翻訳]

Advanced options [進行中の翻訳]

SLA スライス処理

Other [進行中の翻訳]

PrusaSlicerスライシングソフトウェアの公式ドキュメント。 基本構成からモディファイヤメッシュなどの詳細設定まで。

PrusaSlicer

1. はじめに

2. Disassembling the SL1

3. Upgrading to SL1S SPEED

4. Firmware upgrading

5. Calibrating the printer

6. First print

7. Manual changelog

<p>これは、エラー画面を表示するための高度なシステムで、ユーザーにより有用な情報を提供します。問題が発生した場合、プリンターはエラーの名前に続いて簡単な説明とQRコードを表示します。スマートフォンを使ってコードをスキャンすると、プリンターに何が起こったのか、そして問題をどのように解決するかを詳しく説明する記事に即座にリダイレクトされます。</p>
<p>QRコードを表示するプリンターは、<a href="https://github.com/prusa3d/Prusa-Error-Codes">GitHubページ</a>で確認できます。古いファームウェアバージョンでは外観が異なる場合があることに注意してください。</p>
<table style="border-collapse: collapse; width: 100.026%;" border="0">
<tbody>
<tr>
<td style="width: 32.1716%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="http://help.prusa3d.com/wp-content/uploads/2024/09/a8eb010a2d9a57fbc9c69b36b0477893.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="QR Error codes REVIEW" alt="" width="225" height="300" loading="lazy" /></td>
<td style="width: 67.8023%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="http://help.prusa3d.com/wp-content/uploads/2024/09/b7e7fce178235ca5a553c4ff07e83c65.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="QR Error codes REVIEW" alt="" width="500" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3>エラーコードの使用方法</h3>
<div>
<p>プリンターがエラー画面を表示した場合、記事にアクセスする方法は複数あります：</p>
<ul>
<li>スマートフォンやタブレットを使用してプリンター画面のQRコードをスキャンする</li>
<li>画面に表示されているリンクを使用する（例：help.prusa3d.com/en/12201）</li>
<li>help.prusa3d.comを開き、エラーを検索する（例：12201）</li>
</ul>
<p>何が問題で、どのように修正するかを説明する記事に従ってください。一部のエラーでは、プリンターの破損した部品の交換が必要になる場合があることに注意してください。交換が必要な場合は、記事の下部にサービスガイドへのリンクがあります。</p>
<h3>エラーコードの説明</h3>
<p>各コードはどのように作成されているのでしょうか？再び例としてエラー#12201を使用しましょう。コードは5つの数字で構成され、以下のパターンに従っています：XXYZZ</p>
<table class="striped">
<tbody>
<tr style="height: 18.4px;">
<td style="width: 48.8442%; text-align: center; height: 18.4px;"><strong># XXYZZ</strong></td>
<td style="width: 48.8442%; text-align: center; height: 18.4px;"><strong><a href="http://help.prusa3d.com/ja/article/preheat-error-bed-12201-mini_112444">ベッドの加熱に失敗 #12201 (MINI)</a></strong></td>
</tr>
<tr style="height: 119.2px;">
<td style="width: 48.8442%; height: 119.2px;">
<p>XX - USB PIDに基づくプリンターのID番号</p>
<p>Y - エラーカテゴリ（すべてのプリンターに共通）</p>
<p>ZZ - 特定のエラーのID番号</p>
</td>
<td style="width: 48.8442%; height: 119.2px;">
<p>12 - プリンター番号12：Original Prusa MINI</p>
<p>2 - エラーカテゴリ：温度エラー</p>
<p>01 - 特定のエラーコード：ヒートベッドの加熱に失敗</p>
</td>
</tr>
</tbody>
</table>
</div>
<div>
<h3>デバイスハッシュ</h3>
<p>QRコードに埋め込まれたURLリンクには、オプションの「デバイスハッシュ」が含まれる場合があります。これはMINI+では<em>設定</em>で、SL1では<em>設定 -&gt; 設定とセンサー</em>で、MK4とXLプリンターでは<em>設定 -&gt; システム</em>で無効にできます。この情報を含めることで、最新バージョンのファームウェアを実行しているかどうかを確認でき、そうでない場合は記事の上部でお知らせします。URLで提供される情報は、最も一般的なエラーと各プリンターが経験したエラーの数をより良く理解するために、データベースに保存されます。</p>
</div>
<p>デバイスハッシュはシリアル番号のような機密情報を復元するために使用することはできず、QRコード機能以外には使用されないため、セキュリティ上の懸念は全くありません。この機能はデフォルトでONになっています。この拡張機能を使用したくない場合は、プリンターのメニューで「QRのデバイスハッシュ」をOFFに設定することで、オフにすることができます。</p>
<p>オフにすると、QRコードのURLには以下のみが含まれます：https://help.prusa3d.com/en/12201/</p>
<table class="striped">
<tbody>
<tr style="height: 18px;">
<td style="width: 30.8567%; height: 18px;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/03/MINI_device_hash_toggle_upscaled.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/03/MINI_device_hash_toggle_upscaled-300x400.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/03/MINI_device_hash_toggle_upscaled-450x600.jpg 450w, http://help.prusa3d.com/wp-content/uploads/2021/03/MINI_device_hash_toggle_upscaled-225x300.jpg 225w, http://help.prusa3d.com/wp-content/uploads/2021/03/MINI_device_hash_toggle_upscaled-768x1024.jpg 768w" alt="" width="250" height="333" loading="lazy" /></td>
<td style="width: 66.8317%; height: 18px;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/03/SL1-Setting-and-sensors.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/03/SL1-Setting-and-sensors-600x360.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2021/03/SL1-Setting-and-sensors-800x480.jpg 800w, http://help.prusa3d.com/wp-content/uploads/2021/03/SL1-Setting-and-sensors-300x180.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/03/SL1-Setting-and-sensors-768x461.jpg 768w" alt="" width="600" height="360" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><em>左がMINIのデバイスハッシュトグル、右がSL1のデバイスハッシュトグルです。</em></p>


QRエラーコード

<p>If you encounter an issue, we may request the log file from your Original Prusa SL1. This contains a wide range of info specific to your unit. By going to the printer menu to <em>Settings -&gt; System logs</em> (<span style="color: #2dc26b;">green square</span>), <strong>you have two options:</strong></p>
<ol>
<li>Save the log to a USB flash drive</li>
<li>Upload the log to the Prusa server</li>
</ol>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.805%;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/e74601433fc07c43_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/e74601433fc07c43_painted-600x360.jpeg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/e74601433fc07c43_painted-800x480.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/e74601433fc07c43_painted-300x180.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/e74601433fc07c43_painted-768x461.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/e74601433fc07c43_painted-1536x922.jpeg 1536w" alt="" width="400" height="240"></td>
<td style="width: 48.9057%;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_System_Logs_2021-03_09-31_1.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_System_Logs_2021-03_09-31_1-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_System_Logs_2021-03_09-31_1-800x480.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_System_Logs_2021-03_09-31_1-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_System_Logs_2021-03_09-31_1-768x461.jpg 768w" alt="" width="400" height="240"></td>
</tr>
</tbody>
</table>
<h3>Saving the log to a USB flash drive</h3>
<ol>
<li>Insert a FAT32 formatted USB flash drive into the printer.</li>
<li>In the menu Settings -&gt; System logs, select <em>Save to USB drive</em>.</li>
<li>Wait while the logs are saved to the USB drive. Once the procedure is finished, the printer will return to the Settings menu.</li>
</ol>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-800x480.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-768x461.jpg 768w" alt="" width="500" height="300"></p>
<ol start="4">
<li>You can now remove the USB drive, plug it in your computer, and look for the saved log file (logs.<em>YOURPRINTERSERIALNUMBERDANDDATE</em>.txt.gz). Send this file, along with your description of the issue to <a href="http://help.prusa3d.com/ja/article/customer-support_2287">カスタマーサポート</a>.</li>
</ol>
<h3>Uploading log to the Prusa server</h3>
<div class="tip-callout">This option is only possible if the printer has <strong>firmware 1.5.0 or above</strong>&nbsp;and is <a href="http://help.prusa3d.com/ja/article/internet-connection-sl1-sl1s_1981">connected to the internet</a>.</div>
<ol>
<li>In the menu <em>Settings -&gt; System logs</em>, select <em>Upload to Server</em>.</li>
<li>Wait while the logs are uploaded.&nbsp;</li>
</ol>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-800x480.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/screenshot_Logs_export_2021-03_09-31_2-768x461.jpg 768w" alt="" width="500" height="300"></p>
<ol start="3">
<li><span style="font-size: 12pt;">Once the log upload is finished, a code consisting of letters and numbers will appear (<span style="color: #b96ad9;">purple square</span>). Note this code down, and provide it when contacting <a href="http://help.prusa3d.com/ja/article/customer-support_2287">カスタマーサポート</a>.<br /></span></li>
</ol>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c4180db7f8aa6965_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c4180db7f8aa6965_painted-600x360.jpeg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c4180db7f8aa6965_painted-800x480.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c4180db7f8aa6965_painted-300x180.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c4180db7f8aa6965_painted-768x461.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c4180db7f8aa6965_painted-1536x922.jpeg 1536w" alt="" width="500" height="300"></p>
<p></p>

Saving log file (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>The Ambient temperature/UV LED temperature sensor failed.</strong></p>
<p>Error name: Temperature sensor failed</p>
<p>Error code: #10205</p>
<p>The SL1 has several sensors measuring the temperature of various parts and components of the printer. If a wire has been disconnected or damaged, or the sensor itself has been damaged it can produce this error.</p>
<h3>How to fix it?</h3>
<h4>Accessing the mainboard</h4>
<p>First, make sure the plug of the sensor has not detached from the A64 mainboard. To access the mainboard:</p>
<ol>
<li>Remove the 4 screws on the left and right-hand side of the printer.</li>
</ol>
<table style="border-collapse: collapse; width: 100%; height: 295px;" border="0">
<tbody>
<tr style="height: 295px;">
<td style="width: 48.867%; height: 295px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f6c9d2f3605283d.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f6c9d2f3605283d-533x400.jpg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f6c9d2f3605283d-800x600.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f6c9d2f3605283d-300x225.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f6c9d2f3605283d-768x576.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f6c9d2f3605283d-1536x1152.jpg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
<td style="width: 48.867%; height: 295px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/7049ff68b245c60c.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/7049ff68b245c60c-533x400.jpg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/7049ff68b245c60c-800x600.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/7049ff68b245c60c-300x225.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/7049ff68b245c60c-768x576.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/7049ff68b245c60c-1536x1152.jpg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<ol start="2">
<li>Unplug the wire that goes to the front USB port, before sliding the front panel off.</li>
</ol>
<table style="border-collapse: collapse; width: 100%; height: 18px;" border="0">
<tbody>
<tr style="height: 18px;">
<td style="width: 48.805%; height: 18px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1adfef152fa6ad1b.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1adfef152fa6ad1b-533x400.jpg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1adfef152fa6ad1b-800x600.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1adfef152fa6ad1b-300x225.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1adfef152fa6ad1b-768x576.jpg 768w" alt="" width="400" height="300" loading="lazy" /></td>
<td style="width: 48.9057%; height: 18px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/c970b1effe1edc4a_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/c970b1effe1edc4a_painted-533x400.jpeg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/c970b1effe1edc4a_painted-800x600.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/c970b1effe1edc4a_painted-300x225.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/c970b1effe1edc4a_painted-768x576.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/c970b1effe1edc4a_painted-1536x1152.jpeg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p>You will now have full access to the mainboard and its connections. On the left picture, you can see the Ambient temperature sensor (thermistor) indicated by the yellow arrow, and the LED temperature sensor is connected together with its power cables, indicated by the green square.</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.805%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f2e402547a3b126_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f2e402547a3b126_painted-533x400.jpeg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f2e402547a3b126_painted-800x600.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f2e402547a3b126_painted-300x225.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f2e402547a3b126_painted-768x576.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/1f2e402547a3b126_painted-1536x1152.jpeg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
<td style="width: 48.9057%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/743e6333d8ab7cd3.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/743e6333d8ab7cd3-533x400.jpg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/743e6333d8ab7cd3-800x600.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/743e6333d8ab7cd3-300x225.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/743e6333d8ab7cd3-768x576.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/743e6333d8ab7cd3-1536x1152.jpg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p> </p>
<h4>Ambient temperature sensor</h4>
<p>The sensor itself is found inside the tower, behind the back-plate. The sensor can be accessed by removing the screws on the sides</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.805%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/fd157deb23c62893.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/fd157deb23c62893-533x400.jpg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/fd157deb23c62893-800x600.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/fd157deb23c62893-300x225.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/fd157deb23c62893-768x576.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/fd157deb23c62893-1536x1152.jpg 1536w" alt="" width="400" /></td>
<td style="width: 48.9057%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/84e34282a2551a1b.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/84e34282a2551a1b-533x400.jpg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/84e34282a2551a1b-800x600.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/84e34282a2551a1b-300x225.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/84e34282a2551a1b-768x576.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/84e34282a2551a1b-1536x1152.jpg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h4> </h4>
<h4><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/0fcf23bd33e55b60_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/0fcf23bd33e55b60_painted-533x400.jpeg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/0fcf23bd33e55b60_painted-800x600.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/0fcf23bd33e55b60_painted-300x225.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/0fcf23bd33e55b60_painted-768x576.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2020/12/0fcf23bd33e55b60_painted-1536x1152.jpeg 1536w" alt="" width="600" height="450" loading="lazy" /></h4>
<p>You can check the integrity of the ambient temperature sensor using a multimeter. Unplug it from the board and measure the resistance across the leads of the connector, as illustrated below. Set your meter to 200K to be within the correct range. More info in <a href="http://help.prusa3d.com/ja/article/multimeter-usage_2117">Multimeter usage [進行中の翻訳]</a>.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusuki/prusuki-images/mm-thermistor.jpg" alt="" width="400" height="289" loading="lazy" /></p>
<h4>UV LED temperature sensor</h4>
<p>This sensor is integrated into the LED PCB. If you receive the error that this has failed, check and reseat the connections of the led panel, but it may have to be replaced. It is an assembly with a heatsink and fan and can be accessed from the bottom of the printer.</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.8194%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/cf1cdbf2c0f77b18_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/cf1cdbf2c0f77b18_painted-533x400.jpeg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/cf1cdbf2c0f77b18_painted-800x600.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/cf1cdbf2c0f77b18_painted-300x225.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/cf1cdbf2c0f77b18_painted-768x576.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/cf1cdbf2c0f77b18_painted-1536x1152.jpeg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
<td style="width: 48.9107%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c318aa2e8f5889e2_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c318aa2e8f5889e2_painted-533x400.jpeg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c318aa2e8f5889e2_painted-800x600.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c318aa2e8f5889e2_painted-300x225.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c318aa2e8f5889e2_painted-768x576.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/c318aa2e8f5889e2_painted-1536x1152.jpeg 1536w" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3>Replacement guides</h3>
<p><a href="http://help.prusa3d.com/ja/guide/how-to-replace-a-uv-led-assembly-sl1_149828">How to replace a UV LED assembly (SL1) [進行中の翻訳]</a></p>
<p></p>


Temperature sensor failed #10205 (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer displaying the message: <strong>Speaker test failed, please check the connection and repeat the action.</strong></p>
<p>Error name: Speaker test failed</p>
<p>Error code: #10310</p>
<p>The speaker test will play the user a sound that is confirmed by user-input. If the sound is played by the test, and you select you did not hear it, it will give this error.</p>
<h3>How to fix it?</h3>
<p>Make sure the connector is well seated using the guide below and polarity is correct (Red on the Right, by the +).</p>
<p>Also inspect the speaker, found at the back of the Touch Screen, whether its wires are secure, and no solder pads have come loose.</p>
<h3>Replacement guide(s)</h3>
<p><a href="http://help.prusa3d.com/ja/article/saving-log-file-sl1-sl1s_142334">Saving log file (SL1/SL1S) [進行中の翻訳]</a></p>
<p></p>


Speaker test failed #10310 (SL1/SL1S)

<h3>What happened?</h3>
<p><span data-sheets-formula-bar-text-style="font-size:13px;color:#000000;font-weight:normal;text-decoration:none;font-family:'Arial';font-style:normal;text-decoration-skip-ink:none;">The printer is displaying the message: <strong>RPM of (fan)s not in range. Check if the fan is connected correctly.</strong><br /></span></p>
<p>Error name: Fan RPM not in range</p>
<p>Error code: #10122</p>
<p>Issued if the RPM of any of the printer's fans is not within their limits of use when measured, during the calibration wizard.</p>
<h3>How to fix it?</h3>
<p><strong>The SL1 has three fans:</strong></p>
<ul>
<li><strong><span style="color: #843fa1;">The LED cooling fan (indicated in the picture by a purple arrow on the left).</span></strong></li>
<li><strong><span style="color: #169179;">The right blower fan (indicated in the picture by a green arrow in the middle).</span></strong></li>
<li><strong><span style="color: #236fa1;">The rear filter fan (indicated in the picture by a blue arrow on the right).</span></strong></li>
</ul>
<p>If the warning appears, please follow the maintenance steps for the fan that generated the issue: <a href="http://help.prusa3d.com/ja/article/sl1-sl1s-maintenance_1951#fan-cleaning-removing-dust">SL1/SL1S maintenance [進行中の翻訳]</a>. When doing that, also check the cable connections of the fan to the mainboard.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/3f898d99d9df618f_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/3f898d99d9df618f_painted-533x400.jpeg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/3f898d99d9df618f_painted-800x600.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/3f898d99d9df618f_painted-300x225.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/3f898d99d9df618f_painted-768x576.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/3f898d99d9df618f_painted-1536x1152.jpeg 1536w" alt="" width="600" height="450" loading="lazy" /></p>
<div class="note-callout">If the right blower fan is the one that showed the warning, make sure that the blower gasket is still in place.</div>
<p>Go to the printer menu in <em>LCD menu -&gt; Settings -&gt; Calibration -&gt; Wizard</em>. The printer will run the self-test. In case the fan also fails during the self-test, switch the connection of two of the fans, and see if the warning will be transferred to the new fan. If the error is transferred, the fan that had the warning originally may need to be replaced.</p>
<h3>Parts replacement guide(s)</h3>
<p><a href="http://help.prusa3d.com/ja/guide/how-to-replace-a-blower-fan-sl1_127607">How to replace a blower fan (SL1) [進行中の翻訳]</a></p>
<p></p>

Fan RPM not in range #10122 (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer displaying the message: <strong>Moving the tower failed. Make sure there is no obstacle in its path and repeat the action</strong>.</p>
<p>Error name: Tower moving failed</p>
<p>Error code: #10103</p>
<p>Issued when the printer has attempted to home the tower but has found resistance to move it.</p>
<h3>How to fix it?</h3>
<p>Make sure that the latest <a href="http://help.prusa3d.com/ja/article/firmware-updating-sl1-sl1s_124776">firmware</a> is installed. Check if the three screws indicated in the pictures below are tightened and not moving.</p>
<table style="border-collapse: collapse; width: 100%; height: 18px;" border="1">
<tbody>
<tr style="height: 18px;">
<td style="width: 48.8561%; height: 18px; border-style: hidden;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/tower-screws.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/tower-screws-533x400.jpg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/tower-screws-800x600.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/tower-screws-300x225.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/tower-screws-768x576.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/tower-screws-1536x1152.jpg 1536w" alt="" width="400" height="300"></td>
<td style="width: 48.8561%; height: 18px; border-style: hidden;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/e65aed9db8ee8410_painted.png" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/e65aed9db8ee8410_painted-534x400.png 534w, https://cdn.help.prusa3d.com/wp-content/uploads/e65aed9db8ee8410_painted-300x225.png 300w" alt="" width="400" height="300"></td>
</tr>
</tbody>
</table>
<p>See if there is nothing physically blocking the movement of the tower. In case you cannot find anything blocking it, add a small amount of super lube on the trapezoidal rod.</p>
<p></p>


Tower moving failed #10103 (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer displaying the message: <strong>Failed to read the configuration file.</strong> Try to reset the printer. If the problem persists, contact support.</p>
<p>Error name: Failed to read the configuration file</p>
<p>Error code: <span data-sheets-value="{&quot;1&quot;:2,&quot;2&quot;:&quot;#10505&quot;}" data-sheets-userformat="{&quot;2&quot;:33554945,&quot;3&quot;:{&quot;1&quot;:0},&quot;12&quot;:0,&quot;28&quot;:1}">#10505</span></p>
<p>This should only happen in case of a bug or hardware failure. If the problem happens once it might have been some rare EMI (Electro-Magnetic Interference). If it persists either the system is corrupted or the A64 hardware is failing.</p>
<h3>How to fix it?</h3>
<p>Restart the printer, and flash the firmware. If still unresolved, replace the A64 controller board.</p>
<h3>Guides</h3>
<p><a href="http://help.prusa3d.com/ja/article/firmware-updating-sl1-sl1s_124776">Firmware updating (SL1/SL1S) [進行中の翻訳]</a></p>
<p><a href="http://help.prusa3d.com/ja/guide/how-to-replace-the-a64-board-sl1_151162">How to replace the A64 board (SL1) [進行中の翻訳]</a></p>
<p></p>


Failed to read the configuration file #10505 (SL1)

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>The ambient temperature is too high, the print can continue, but it might fail.</strong></p>
<p>Error name: Ambient temp. too hot</p>
<p>Error code: #10702</p>
<h3>How to fix it?</h3>
<p>Make sure that the printer is in an environment below 32 ºC +/- 2 ºC. If the temperature is too hot the necessary exposure time might need to be changed.</p>
<p></p>


Ambient temperature too high #10702 (SL1/SL1S)

<p>If the print does not appear on the printing platform, nor at the bottom of the resin tank, there are a couple of possible causes:</p>
<ul>
<li>Highly insufficient exposure times</li>
<li>Old or separated resin</li>
<li>A large amount of Isopropyl alcohol (IPA) in the resin/on platform</li>
<li>Faulty UV LED panel,</li>
<li>Faulty print display</li>
</ul>
<h3>Insufficient/Incorrect exposure times</h3>
<p>Make sure you are using the correct preset with the recommended exposure times for your resin, in PrusaSlicer. If your resin does not have a dedicated preset, use the <a href="http://help.prusa3d.com/ja/article/resin-calibration-sl1-sl1s_112182">Resin Calibration (SL1/SL1S) [進行中の翻訳]</a> to determine the correct values.</p>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Changeexposure-2021-04_13-06_4.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Changeexposure-2021-04_13-06_4-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Changeexposure-2021-04_13-06_4-800x480.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Changeexposure-2021-04_13-06_4-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Changeexposure-2021-04_13-06_4-768x461.jpg 768w" alt="" width="600" height="360"></p>
<h3>Old or separated resin</h3>
<p>If the resin is not stored correctly, or you use the same batch, again and again, it can lose its original properties and won’t solidify anymore. Try a new batch of resin if you kept re-using one batch several times.</p>
<p>If the resin remains in the vat for too long it can start separating its reactive components and its oil solution (notice the lines of color difference in the picture below). Even though the printer will stir the resin using its tilt platform it may not be sufficient. With a gloved finger or a spatula, carefully stir the resin until its color is uniform.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/resintankSL1.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/resintankSL1-300x169.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/resintankSL1-600x338.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/resintankSL1-768x432.jpg 768w" alt="" height="400"></p>
<h3>A large amount of Isopropyl alcohol (IPA) in the resin/on the platform</h3>
<p>If the platform is still wet of IPA after cleaning when the print begins, the IPA will repel the resin and the print will not stick to the platform upon exposure. Make sure you wipe the platform dry before starting your print.</p>
<p>If a lot of IPA has dripped into the resin tank it can dilute the resin to the point where it will lose some of its properties. Empty the tank and try a new batch of resin.</p>
<h3>Faulty print display or UV LED panel</h3>
<p>Check whether the UV panel and LCD screen work as intended – Run the Display test, found at <em>Settings -&gt; Calibration-&gt; Display test</em><em>.</em> Follow the onscreen instructions.</p>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Calibration-2021-04_13-05_0.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Calibration-2021-04_13-05_0-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Calibration-2021-04_13-05_0-800x480.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Calibration-2021-04_13-05_0-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/04/SL1-screenshot-Calibration-2021-04_13-05_0-768x461.jpg 768w" alt="" width="600" height="360"></p>
<p>If the logo does not appear on the display, but it is lit from the back, check the display’s wiring. To do so, remove the black cover secured by eight screws, then inspect the cable leading from the exposition (print) display. You can carefully disconnect and reconnect the cable header from the mainboard to ensure that it is seated correctly.</p>
<div class="tip-callout">See our guide for <a href="http://help.prusa3d.com/ja/guide/how-to-replace-the-print-display-sl1_133295">replacing the print display</a>.</div>
<p>If it remains completely dark may be due to a faulty UV LED panel. Check its wiring by unplugging it and plugging it back in, making sure the connector is seated properly. Test the display again and if it still does not work it will have to be replaced.</p>
<div class="warning-callout">Make sure the cooling fan for the UV LED panel is working. Without it, both the UV LED panel and print display can overheat and be damaged.</div>
<p><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1-300x169.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1-600x338.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1-768x432.jpg 768w" alt=""></p>
<div class="tip-callout">If you need to change your print display, you need to calibrate the display to your machine. Both are <a href="https://shop.prusa3d.com/en/sl1-cw1/1276-sl1-print-display-assembly-with-uv-calibrator.html">available in the e-shop as a bundle</a>, if you do not <a href="https://shop.prusa3d.com/en/sl1-cw1/953-assembled-print-display.html">have a calibrator already</a>.</div>
<p></p>


Print doesn't appear / Resin does not solidify

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>The printer is not calibrated. Please run the Wizard first</strong>.</p>
<p>Error name: Not mechanically calibrated</p>
<p>Error code: #10113</p>
<p>Issued when the printer has not been calibrated before a print.</p>
<h3>How to fix it?</h3>
<p>Go in the printer menu to <em>LCD menu -&gt; Settings -&gt; Calibration -&gt; Printer Calibration</em>. Follow the instructions on the screen, and remember that you can swipe the screen to see example pictures of each step of the calibration.</p>
<p></p>


Calibration error #10113 (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>Requested intensity cannot be reached by min. allowed PWM.</strong></p>
<p>Error name: UV intensity too high&nbsp;</p>
<p>Error code: #10317</p>
<p>The most probable reason for this error is either the print display or UV LED set. Either the LEDs produce too much light, or the display is not blocking enough light.</p>
<h3>How to fix it?</h3>
<h4>Faulty print display or UV LED panel</h4>
<p>Check whether the UV panel and LCD screen work as intended – Run the Display test, found at <em>Settings -&gt; Calibration -&gt; Display test</em> (purple square)<em>.</em> Follow the onscreen instructions.</p>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/868f032dfb27b102_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/868f032dfb27b102_painted-600x360.jpeg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/868f032dfb27b102_painted-800x480.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/868f032dfb27b102_painted-300x180.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/868f032dfb27b102_painted-768x461.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/868f032dfb27b102_painted-1536x922.jpeg 1536w" alt="" width="600" height="360"></p>
<p>Check if the logo appears on the display as below. If there are "holes" in the image, the print display must be replaced.</p>
<p>To do so, remove the black cover secured by eight screws, then inspect the cable leading from the exposition (print) display. You can carefully disconnect and reconnect the cable header from the mainboard to ensure that it is seated correctly.</p>
<p><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1-300x169.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1-600x338.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/testLCDSl1-768x432.jpg 768w" alt=""></p>
<p>If it remains completely dark, it may have a faulty UV LED panel. Check its wiring by unplugging it and plugging it back in, making sure the connector is seated properly. Test the display again and if it still does not work it will have to be replaced.</p>
<h3>Guides</h3>
<p>See our guide for <a href="http://help.prusa3d.com/ja/guide/how-to-replace-the-print-display-sl1_133295">replacing the print display</a>.</p>
<p></p>


UV intensity too high #10317 (SL1/SL1S)

<p>A print can finish even if some parts of the object weren’t printed fully, though a missing part of an object will more often cause the whole print-job to fail. Try printing a sample object to see whether it is also affected by this issue.</p>
<p style="text-align: center;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/missingpartSL1-1024x577.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/missingpartSL1-1024x577-300x169.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/missingpartSL1-1024x577-600x338.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/missingpartSL1-1024x577-768x433.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/missingpartSL1-1024x577-800x451.jpg 800w" alt="">The warrior’s right arm is missing completely and a part of the shield is damaged</p>
<div class="note-callout">There are two main reasons (and a third, less common one) why printed objects may have missing parts. They both usually come down to incorrect slicer-settings.</div>
<h4><strong>Lack of supports</strong></h4>
<p>Please check the <a href="http://help.prusa3d.com/ja/article/printer-handbooks_125045">SL1 Handbook</a>, chapter 6.5: Slicing objects for the SL1, to learn how to correctly position an object and generate supports for it. Keep in mind that parts of the object cannot start mid-air and that the printer has a threshold for overhangs.</p>
<div class="tip-callout">Improve the supports in PrusaSlicer, re-slice the object, and try printing it again. If the problem persists, try printing a sample object and see if the problem is still present. If it is, there might be a problem with the printing display or UV LED panel.&nbsp;</div>
<h4><strong>Incorrect exposure times</strong></h4>
<p>If you set incorrect exposure times (especially too low times), the resin will not have enough time to solidify, which may result in missing details. Always make sure you’re using recommended exposure times for your prints.</p>
<div class="note-callout">Make sure you are using exposure times recommended for the resin of your choice.</div>
<h4><strong>Faulty hardware</strong></h4>
<p>Another possibility (a less common one) is that your print display or UV LED panel is faulty, so either the mask is incorrectly displayed or only a part of the object is cured by UV light. Please contact customer support if the previous steps did not solve the issue.</p>
<p></p>


Missing parts (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>(sensor)s not in range! Measured temperature: (temperature). Keep the printer out of direct sunlight at room temperature (18 - 32 °C).</strong></p>
<p>Error name: Temp. out of range</p>
<p>Error code: #10208</p>
<h3>How to fix it?</h3>
<p>The printer has a set working temperature between 18 - 32 °C (64 - 89 °F), to ensure smooth operation. Direct sunlight or a cold garage is not ideal. Try to move the printer to a more stable indoor environment, let the temperature equalize over 30 minutes to 1 hour, and try again.</p>
<p>If it persists, it indicates an issue with a temperature sensor, but you should then receive other errors.</p>
<p></p>


Temperature out of range #10208 (SL1/SL1S)

<p>If there is no object to be seen on the metal platform as it raises from the resin tank, it usually means that the first layer didn’t adhere properly to the platform. Let’s find the reason why it happened.</p>
<div class="warning-callout"><strong>Stop the print</strong> immediately after noticing this issue to avoid any damage to the FEP film.</div>
<h3>What does it look like</h3>
<p>All or some of the objects you wanted to print are not on the printing platform. After you stop the print, unscrew and remove the resin tank and pour the resin out, you will see a blot or a flat blob of solidified resin stuck to the FEP foil.</p>
<div class="note-callout">Refer to the SL1 printed handbook, chapter 15.1, or <a href="http://help.prusa3d.com/ja/article/removing-and-object-stuck-to-the-bottom-of-the-tank_1800">this guide</a> to see how to remove it safely without damaging the fragile film.</div>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1tank2-1.png" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/SL1tank2-1-300x203.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1tank2-1-593x400.png 593w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1tank2-1-768x518.png 768w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1tank2-1-800x540.png 800w" alt="" width="672" height="454"></p>
<h3>How to fix it</h3>
<p>There is a number of reasons why the first layer does not stick to the printing platform. Generally, they can be classified either as assembly/hardware related or as calibration/settings related reasons.</p>
<h4><strong>Calibration and settings</strong></h4>
<h4>The printer is not calibrated correctly</h4>
<p>Even if nothing changed since the last calibration of the printer - you didn’t replace any parts, and you didn’t move the printer to a new location, a re-calibration may be required. Please refer to the <a href="http://help.prusa3d.com/ja/guide/5-preflight-check_13824">Calibration</a> chapter for step-by-step instructions. <strong>Make sure not to skip any step!</strong></p>
<h4>Incorrect slicing settings</h4>
<div class="tip-callout">To rule out slicing-related issues, try printing a sample (pre-sliced) object from the USB flash drive.</div>
<p>Re-slice your model using default settings and try printing the object again. Always use PrusaSlicer, where we have already prepared profiles for the most used resins. We have tested over a hundred of various resins, and we’re continually testing new ones.&nbsp;</p>
<p>Make sure that you are using the recommended exposure times for the resin of your choice. The exposure times for initial layers should be much longer (e.g., 45 seconds) that the regular layers to ensure a strong connection to the printing platform.</p>
<h4>Object orientation / insufficient supports</h4>
<p>Incorrect object orientation can be another source of adhesion problems. After a layer is solidified, the printer has to detach it from the bottom of the tank - if there is just single support holding a large part of the object, it may not withstand the peel force, causing it to detach.</p>
<p>Always position the model so that the largest flat part is in touch with the platform. When using supports, make sure there are enough of them. You can also use the pad to give the supports an extra surface. Keep in mind you can always adjust the Support points density and that you can manually add support points to the problematic areas of the design.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/prusuki/prusuki-images/2019-09-02-19-33-02-window.jpg" data-hd-align="center"></p>
<h4>Resin has been mixed with IPA</h4>
<p>The resin has been mixed with IPA (e.g., while cleaning the printing platform) and its properties have changed, so it cannot solidify. <strong>Clean and dry</strong> the resin tank properly, use a new batch of resin and try again.</p>
<h3><strong>Hardware and assembly</strong></h3>
<h4>The printing platform is not secured properly</h4>
<p>After inserting the platform back to the printer, make sure that you didn’t forget to <strong>tighten the black printed knob</strong> at the top of the tower. A freely moving printing platform cannot reach an optimal position and the first layer won’t stick.</p>
<h4>The bottom of the tank is dirty</h4>
<p>Every time before pouring the resin into the tank, make sure that the bottom of the tank (the FEP film) is completely clear. A cloudy, dirty or damaged FEP film will have a negative impact on the printing quality. It may even <strong>block UV light</strong> and stop the resin from solidifying properly.</p>
<div class="note-callout">Clean the FEP film using <strong>warm water</strong> and a bit of <strong>dishwashing</strong> soap, and wipe it with <strong>soft</strong> paper towels. Low quality / rough paper towels could scratch the surface. <strong>Do not use IPA nor acetone!</strong></div>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/en/wp-content/uploads/resin-tank.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/resin-tank-300x104.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/resin-tank-600x207.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/resin-tank-768x265.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/resin-tank-800x276.jpg 800w" alt="resin tank"></p>
<h4>Loose Torx screw(s)</h4>
<p>The FEP film is tightened to the resin tank frame by twenty-two M4x8rt Torx screws. At the end of the assembly, all of these screws must be tightened into the frame. None of them should be protruding. The screws facing down, the frame must <strong>sit on a flat surface without any rocking</strong>.</p>
<h4>A faulty print display or UV LED panel</h4>
<p>If the first layer didn’t adhere to the printing platform and it’s <strong>not attached to the bottom</strong> of the tank either, it usually means that the first layer wasn’t created at all. A possible cause is a faulty print display or a faulty or disconnected UV LED panel. Unscrew the bottom cover off the SL1 and check whether the cable is connected on both sides.&nbsp;</p>
<p></p>


First layer does not stick (SL1/SL1S)

<p>The printing platform must be perfectly flat and degreased to ensure that the first prints are properly attached. If the pad or print itselfs separates from the printing platform, it can be caused by bumps on the platform, poor calibration, or dirt/grease on the platform.</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/breakfromplat.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/breakfromplat-300x169.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/breakfromplat-600x338.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/breakfromplat-768x432.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/breakfromplat-800x450.jpg 800w" alt=""></p>
<p>&nbsp;</p>
<div class="tip-callout">Make sure the <strong>platform is perfectly clean and degreased.</strong> Wash the entire platform in IPA carefully to ensure it is completely degreased. <strong>Consider re-calibrating the printer</strong> to make sure the platform is in good contact with the bottom of the tank.</div>
<div class="note-callout">It is possible to sand down the platform&rsquo;s surface with a 1000-grit sandpaper, however, this procedure is <strong>recommended only to experienced users</strong>, since incorrect approach could damage the platform. Be gentle and make it even.</div>
<p>&nbsp;</p>
<p></p>


Prints breaking away from the platform

<p>A skewed/deformed print is usually caused by <strong>loose screws</strong> – either the <strong>large black knob</strong> at the top of the cantilever, the screw(s) on the cantilever itself or the <strong>resin tank screws</strong>.</p>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/daeb7d439d9e1519_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/daeb7d439d9e1519_painted-473x400.jpeg 473w, https://cdn.help.prusa3d.com/wp-content/uploads/daeb7d439d9e1519_painted-710x600.jpeg 710w, https://cdn.help.prusa3d.com/wp-content/uploads/daeb7d439d9e1519_painted-300x254.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/daeb7d439d9e1519_painted-768x649.jpeg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/daeb7d439d9e1519_painted-1536x1299.jpeg 1536w" alt="" width="473" height="400"></p>
<h3>Solution</h3>
<h4>Cantilever screw(s)</h4>
<p>Make sure the cantilever screw(s) is tightened up firmly. If not, the whole platform might shift and you must <strong>redo the printer calibration</strong>. After getting to the corresponding step of the calibration, follow the on-screen instructions. To ensure that the geometry of the printer is not shifted when tightening, <strong>tighten the screw slowly but firmly.</strong> To apply enough torque, <strong>use the short end of the Allen wrench.</strong>&nbsp;(as depicted below).</p>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_cantilever.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_cantilever-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_cantilever-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_cantilever-768x461.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_cantilever.jpg 1600w" alt="" width="800" height="480"></p>
<h4>Knob and tank</h4>
<p>Make sure the printer is properly calibrated. By moving the platform, ensure it is inserted all the way in. Tighten the black knob at the top of the tower. (left picture)</p>
<p>Also, tighten both resin tank screws evenly using the same amount of force (right picture).</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.805%;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_knob.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_knob-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_knob-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_knob-768x461.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/calibration_tighten_knob.jpg 1600w" alt="" width="800" height="480"></td>
<td style="width: 48.9057%;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/tighten-resin_tank.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/tighten-resin_tank-600x360.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/tighten-resin_tank-300x180.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/tighten-resin_tank-768x461.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2022/03/tighten-resin_tank.jpg 1600w" alt="" width="800" height="480"></td>
</tr>
</tbody>
</table>
<p></p>


Skewed / deformed prints (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>The printer is not connected to the internet, please check the connection in the Settings.</strong></p>
<p>Error name: Not connected to network</p>
<p>Error code: #10402</p>
<h3>How to fix it?</h3>
<p>There are two ways to connect the SL1 to the internet. You can use a standard RJ-45 ethernet cable. Connect it to your router, and the printer should obtain an IP address automatically - however, this depends on your network configuration. Since every network is different, please refer to your router’s instructions or your provider’s tech support in case you run into trouble. To check whether the connection has been successfully created, go to Main Menu - Settings - Network.</p>
<p>It is also possible to use the built-in Wi-fi network card compatible with 2.4GHz networks. To open the Wi-Fi network browser, go to Settings - Network. A list of all available networks will be displayed. Select your Wi-Fi network and connect to it by typing your password using the on-screen touch keyboard. You can connect a USB keyboard to the front USB port in case the on-screen keyboard is too small.</p>
<p>Since every network is different, we cannot provide exact instructions on how to connect to your wireless/wired network. If you encounter any trouble, please refer to your router’s manual, or contact your internet provider’s tech support. The quality of your wireless connection depends on many factors - such as the type/configuration of the router, the distance of the printer from the router, or wireless (EMI) interference in your area.</p>
<p></p>


Not connected to network #10402 (SL1/SL1S)

<p>Even though SLA printers can achieve much better resolution than standard FFF/FDM 3D printers, layers on objects can be still visible if you look very closely. If you feel like the layers on your prints are too visible, there’s a couple of things you can try.</p>
<div class="tip-callout">
<p>Print a sample object with a good/tested resin (like the sample bottle of Prusa Orange) and see if the issue is still present. If it’s not, then the cause is usually related to slicing settings.</p>
</div>
<p>&nbsp;</p>
<h3>Possible solutions</h3>
<ul>
<li>Try rotating the object to eliminate gradually rising/declining surfaces.</li>
<li>Extreme exposure times can also produce visible layers.</li>
<li>Mixed / low-quality resins can also affect the print quality – use a fresh, high-quality resin and shake the bottle for at least 20 seconds before you pour the resin in the tank.</li>
</ul>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/visible-layers.png" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/visible-layers-300x187.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/visible-layers-600x374.png 600w, https://cdn.help.prusa3d.com/wp-content/uploads/visible-layers-768x479.png 768w, https://cdn.help.prusa3d.com/wp-content/uploads/visible-layers-800x499.png 800w" alt=""></p>
<p></p>


Visible layers (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>Tilt axis check failed! Check if the tilt can move smoothly in its entire range.</strong></p>
<p>Error name: Tilt check failed</p>
<p>Error code: #10119</p>
<p>The inability to home the tilt might indicate that the tilt movement cannot be detected.&nbsp;</p>
<h3>How to fix it?</h3>
<p>Use the steps below to check the tilt mechanism.</p>
<ol>
<li>Open the eight M3x5b screws securing the cover. <strong>Be careful to unplug the USB &amp; Power-cable before removing the cover completely.</strong></li>
</ol>
<table>
<tbody>
<tr>
<td>
<p><img decoding="async" style="max-height: 350px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-01-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-01-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-01-768x576.png 768w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-01.png" data-hd-height="350px" data-hd-align="center"></p>
</td>
<td>
<p><img decoding="async" style="max-height: 350px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-02-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-02-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-02-768x576.png 768w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-02-800x600.png 800w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-02.png" data-hd-height="350px" data-hd-align="center"></p>
</td>
<td>
<p><img decoding="async" style="max-height: 350px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-03-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-03-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-03-768x576.png 768w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-03.png" data-hd-height="350px" data-hd-align="center"></p>
</td>
</tr>
</tbody>
</table>
<ol start="2">
<li style="counter-increment: li 2;">Remove the M4x10 screw holding the right side of the touch screen. It is not necessary to remove the left screw. Just loosen it about a half-turn and you can slide the screen out, like a door. This will give you access to the motor and connecting rod.</li>
</ol>
<p><img decoding="async" style="max-height: 250px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11-768x576.png 768w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11.png" data-hd-height="250px" data-hd-align="center"></p>
<div class="warning-callout">Be very careful with the touch screen flat cable. It is fragile and can be easily damaged or cut.</div>
<ol start="3">
<li>Move the connecting rod with your hands and see if it has a full range of motion and if the blade sensor-trigger is between the two sides of the sensor. If so, jump to step 12. If any resistance is found, continue with the next step.</li>
</ol>
<p><img decoding="async" loading="lazy" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/6469b043fdec9c7d_painted.jpeg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/6469b043fdec9c7d_painted-533x400.jpeg 533w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/6469b043fdec9c7d_painted-800x600.jpeg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/6469b043fdec9c7d_painted-300x225.jpeg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/03/6469b043fdec9c7d_painted-768x576.jpeg 768w" alt="" width="338" height="254"></p>
<ol start="4">
<li style="counter-increment: li 2;">Remove the M3nN-nut from the screw that connects the tilt-mechanism and the connecting rod. You can do that by using a spanner or pliers to hold the nut and an Allen key to unscrew from the other side.</li>
</ol>
<p><img decoding="async" style="max-height: 250px; display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-08.png" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-08-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-08-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-08-768x576.png 768w" data-hd-height="250px" data-hd-align="center"></p>
<ol start="5">
<li style="counter-increment: li 3;">Remove the two M4x8 screws securing the tilt-motor holder to the bottom plate.</li>
</ol>
<p><img decoding="async" style="max-height: 250px; display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-09.png" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-09-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-09-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-09-768x576.png 768w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-09-800x600.png 800w" data-hd-height="250px" data-hd-align="center"></p>
<ol start="6">
<li style="counter-increment: li 4;">Remove the motor-holder and the connecting-rod from the tilt mechanism.</li>
<li>Go to <a href="http://help.prusa3d.com/ja/guide/2-base-tower_8544#9391">Step 18</a> of <a href="http://help.prusa3d.com/ja/guide/2-base-tower_8544">2. Base & Tower</a> of the assembly guide, and remake the connection of the connecting rod and the motor shaft.</li>
</ol>
<p><img decoding="async" style="max-height: 350px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-07-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-07-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-07-768x576.png 768w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-07.png" data-hd-height="350px" data-hd-align="center"></p>
<div class="tip-callout">Pay extra attention to this step, as not aligning the connecting rod with the protrusion on the holder as instructed will cause the issue again.</div>
<ol start="8">
<li style="counter-increment: li 6;">Reassemble first the tilt to the connecting rod, make sure that after tightening the nut the two parts are in contact.</li>
</ol>
<p><img decoding="async" style="max-height: 250px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-05-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-05-533x400.png 533w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-05.png" data-hd-height="250px" data-hd-align="center"></p>
<div class="warning-callout">Do not over-tighten the nut!</div>
<ol start="9">
<li style="counter-increment: li 7;">Connect the motor holder to the bottom plate using the M4x8 screws.</li>
</ol>
<p>&nbsp;</p>
<p><img decoding="async" style="max-height: 250px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-06-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-06-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-06-768x576.png 768w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-06-800x600.png 800w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-06.png" data-hd-height="250px" data-hd-align="center"></p>
<ol start="10">
<li style="counter-increment: li 8;">Make sure that the optical sensor cable has its correct end connected to the sensor. The middle wire should be blue. In case the middle wire on the sensor connector is black, the connection will need to be swapped.</li>
<li>Move the connecting-rod manually and see if it moves smoothly until the blade sensor-trigger is between the two sides of the sensor.</li>
</ol>
<div class="tip-callout">Make sure the sensor is secured!</div>
<p><img decoding="async" style="max-height: 250px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-10-261x300.png 261w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-10-348x400.png 348w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-10-522x600.png 522w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-10.png" data-hd-height="250px" data-hd-align="center"></p>
<ol start="12">
<li style="counter-increment: li 10;">Slide the LCD back to its place, and tighten both M4x10 screws holding it.</li>
</ol>
<p>&nbsp;</p>
<p><img decoding="async" style="max-height: 200px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11-768x576.png 768w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-11.png" data-hd-height="200px" data-hd-align="center"></p>
<ol start="13">
<li style="counter-increment: li 11;">Connect the USB and Power cable and close the eight M3x5b screws that hold the cover. Tighten them diagonally at first, and add all the screws before tightening them. Pay attention to the cables from the electronics so that they are not pinched.</li>
</ol>
<p>&nbsp;</p>
<p><img decoding="async" style="max-height: 250px; display: block; margin-left: auto; margin-right: auto;" title="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-12-300x225.png 300w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-12-533x400.png 533w, https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-12-768x576.png 768w" src="https://cdn.help.prusa3d.com/wp-content/uploads/SL1-Tilt-mechanism-error-12.png" data-hd-height="250px" data-hd-align="center"></p>
<ol start="14">
<li style="counter-increment: li 12;">Run the wizard again.</li>
</ol>
<p>&nbsp;</p>
<p></p>


Tilt check failed #10119 (SL1/SL1S)

<h3>What happened?</h3>
<p>The printer is displaying the message: <strong>This project was prepared for a different printer</strong>.</p>
<p>Error name: Wrong printer model</p>
<p>Error code: #10544&nbsp;</p>
<p>This error informs that the project to be printed has not been sliced for the same printer that you are trying to print it on. For example, you have the Original Prusa SL1S Speed and the model has been sliced for the Original Prusa SL1.</p>
<h3>How to fix it?</h3>
<p>Open the project in Prusa Slicer and select the correct printer on the right sidebar. In case you cannot see your printer, go in PrusaSlicer to <em>Configuration -&gt; Configuration Wizard -&gt; Prusa MSLA</em>, and make sure that your printer is selected.</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.8561%;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/Slicer-printer-menu.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/Slicer-printer-menu-600x322.jpg 600w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/Slicer-printer-menu-800x430.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/Slicer-printer-menu-300x161.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/Slicer-printer-menu-768x413.jpg 768w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/Slicer-printer-menu-1536x825.jpg 1536w" alt="" width="400" height="215"></td>
<td style="width: 48.8561%;"><img decoding="async" loading="lazy" src="https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/MSLA-slicer.jpg" sizes="100vw" srcset="https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/MSLA-slicer-577x400.jpg 577w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/MSLA-slicer-800x554.jpg 800w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/MSLA-slicer-300x208.jpg 300w, https://cdn.help.prusa3d.com/wp-content/uploads/2021/07/MSLA-slicer-768x532.jpg 768w" alt="" width="400" height="277"></td>
</tr>
</tbody>
</table>
<p></p>


Wrong printer model #10544 (SL1/SL1S)

<p>The firmware can be installed on both SL1 and SL1S SPEED, it will recognize the printer based on the print display and set the parameters accordingly.</p>
<ul>
<li>Updated Wizards and Selftest wizard</li>
<li>SL1S SPEED print profiles</li>
<li>Speed of first layers</li>
<li>Automatic print adjustments (large objects)</li>
<li>New power button behavior</li>
<li>Transition to DBus for IPC</li>
<li>Improved translations and localisations</li>
<li>Improved screensaver</li>
<li>Improved logging procedure</li>
<li>PrusaLink updates</li>
<li>Print display time counter</li>
<li>Improved cooling</li>
<li>Screen compositor Weston</li>
</ul>
<p></p>


1.6.0

<ul>
<li>PrusaSlicer 2.3.3
<ul>
<li>Patch release - fixing the bug in handling FDM multi-material project and configuration files</li>
</ul>
</li>
</ul>


2.3.3

<p>The firmware can be installed on both SL1 and SL1S SPEED, it will recognize the printer based on the print display and set the parameters accordingly. This firmware is required for the upgrade from SL1 to SL1S.</p>
<ul>
<li style="font-weight: 400;" aria-level="1">New print display driver</li>
<li style="font-weight: 400;" aria-level="1">Support for diacritics in filenames</li>
<li style="font-weight: 400;" aria-level="1">Improved display counter</li>
<li style="font-weight: 400;" aria-level="1">PrusaLink improvement</li>
<li style="font-weight: 400;" aria-level="1">Preprint checks</li>
<li style="font-weight: 400;" aria-level="1">Increased space for user prints</li>
<li style="font-weight: 400;" aria-level="1">Other improvements and bug fixes</li>
</ul>


1.6.1

<ul>
<li>Initial release reflecting the new features and changes in the Original Prusa SL1S SPEED</li>
</ul>


1.06

<p>This release is a small hotfix for the SL1 and SL1S:</p>
<ul>
<li>Factory reset fixed</li>
</ul>
<p>See full release log for more details.</p>


1.6.2

<p>This release includes two changes in the user interface and several bug fixes for the SL1 and SL1S:</p>
<ul>
<li>Preprint workflow changed</li>
<li>Print profile selection added to PrusaLink</li>
</ul>
<p>See full release log for more details.</p>


1.6.3

<ul>
<li>Multi-material painting</li>
<li>Improved supports and bridging</li>
<li>Shape gallery</li>
<li>Fuzzy skin</li>
<li>Windows dark mode</li>
<li>Brim for individual objects</li>
<li>Negative volumes</li>
<li>Automatic color change for logos and signs</li>
<li>Tip of the day notifications</li>
<li>Model simplification</li>
<li>Support for 3DLabPrint airplane models</li>
<li>New 3rd party printer profiles</li>
<li>…and more!</li>
</ul>


2.4.0

<ul>
<li>Added support for M1</li>
<li>Bug fixes</li>
</ul>
<p></p>


1.6.4

<ul>
<li>G-Code Substitutions</li>
<li>Added profiles for Anycubic 4Max Pro 2.0</li>
<li>Added Artillery Hornet profile</li>
<li>Added RatRig V-Core and V-Minion bundle</li>
<li>Added Jubilee bundle</li>
</ul>


2.4.1

<ul>
<li>Support for new rear fan</li>
<li>Support for new DAC converter</li>
</ul>
<p></p>

1.6.6

<ul class="p-rich_text_list p-rich_text_list__bullet" data-stringify-type="unordered-list" data-indent="0" data-border="0">
<li data-stringify-indent="0" data-stringify-border="0">Updated translations</li>
<li data-stringify-indent="0" data-stringify-border="0">Added profiles for Snapmaker printers</li>
<li data-stringify-indent="0" data-stringify-border="0">Added profiles for Zonestar printers</li>
<li data-stringify-indent="0" data-stringify-border="0">Bug fixes</li>
</ul>
<p></p>

2.4.2

1.7.0

<ul>
<li>New perimeter generator Arachne</li>
<li>STEP file format support</li>
<li>Lightning infill</li>
<li>Improved seam placement based on the visibility</li>
<li>Pressure equalizer</li>
<li>New printer and material profiles</li>
<li>Many bugfixes and smaller improvements</li>
<li>Offline unattended installation for mass deploys (in Drivers &amp; Apps package installator).</li>
</ul>
<p></p>

2.5.0

<ul>
<li>Fixed bugs</li>
<li>Known issues</li>
</ul>
<p></p>

1.7.1


<ul>
<li>Improved 'Monotonic lines' fill pattern</li>



<li>Improved Acceleration control</li>



<li>Specific object arrangement for XL</li>



<li>Original Prusa XL profiles</li>



<li>Updated translations</li>



<li>Bugfixes</li>
</ul>


2.5.1


<ul>
<li>Original Prusa MK4 profiles</li>
</ul>


2.5.2


<ul>
<li>Organic supports</li>



<li>Automatic support painter</li>



<li>Text embossing tool</li>



<li>Improved cut tool</li>



<li>Adding connectors and dowel pins</li>



<li>Measurement tool</li>



<li>Dynamic overhang speed</li>



<li>Improved Ensure vertical shell thickness</li>



<li>Smart extending of sparse infill</li>
</ul>


2.6.0


<ul>
<li>New Arrange tool options</li>



<li>New Cut tool options</li>



<li>Per-symbol text projection on surface</li>



<li>Interlocking of painted areas for MMU printing</li>
</ul>


2.6.1


<ul>
<li>New SVG support</li>



<li>Binary G-Code (.bgcode) export support + conversion</li>



<li>Arc fitting support </li>
</ul>


2.7.0


<ul>
<li>Binary G-code settings</li>



<li>Wipe tower weight</li>



<li>Bug fixes</li>
</ul>


2.7.1


<ul>
<li>Project thumbnail page while printing</li>



<li>Elephant foot and exposure times compensation fix</li>



<li>Help pages split between M1 and SL1/S</li>



<li>Red screen (error page) with a scrollable layout</li>



<li>Bug fixes</li>



<li>Known issues</li>
</ul>


1.7.2


<ul>
<li>Improvements to multi-material printing</li>



<li>Vase mode smoothing</li>



<li>Support for 3MF files generated in BambuStudio</li>



<li>Metadata with boundary polygon of each object</li>
</ul>


2.7.3


<ul>
<li>Updating information on package contents</li>
</ul>


1.08


<ul>
<li>Prusa Connect integration</li>



<li>Prusa Account integration</li>



<li>Improved UI</li>



<li>Improved G-code Viewer</li>



<li>New system profile updating system</li>



<li>Single Perimeter for top and bottom layers</li>



<li>Extended SLA layer separation configuration</li>



<li>Bug fixes</li>
</ul>


2.8.0


<ul>
<li>Improved menu bar, the menu no longer hides under a button</li>



<li>Two new parameters (Abrasive material and High flow nozzle) for G-Code checks</li>



<li>Improved automatic orientation of bridges</li>



<li>Number of bugfixes</li>
</ul>


2.8.1


<ul>
<li>Multiple beds and bulk export</li>



<li>Scarf seams</li>



<li>Printables integration</li>



<li>Paint-on fuzzy skin</li>



<li>Improvements in painting tools and multi-material slicing</li>



<li>Basic support for printing with different nozzle diameters</li>
</ul>


Original Prusa SL1S SPEED