The printer package is heavy! Ask someone to help you out.
If children are involved, always supervise them to avoid an injury.
We recommend keeping all the packaging material in case you decide to send the printer back for service.
EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- 日本語
- Home
- XL
- Assembly manuals
- Original Prusa XL Single-Tool (Assembled)
- 2B. Printer Unboxing
2B. Printer Unboxing
Menu
- Original Prusa XL Single-Tool (Assembled)
- 1. Introduction
- 2A. Printer Unboxing
- 2B. Printer Unboxing
- 1. Introduction
- 2. Opening the package
- 3. Opening the package
- 4. Removing the inserts
- 5. Removing the inserts
- 6. Removing the inserts
- 7. Unpacking the printer
- 8. Printer is ready for setup
- 3. Printer set up
- 4. First run
- Manual changelog
2B. Printer Unboxing
Relevant for:
Last updated 2 years ago Difficulty
Easy Steps
8 Available languages
⬢Place the package on a stable surface. Make sure the package is oriented top side up. See the transportation label.
⬢The package is equipped with a tear strip that splits the box in two parts.
⬢Peel off the entire tear strip to split the box.
⬢Remove the top part of the box by lifting it up.
Inside, there are cardboard inserts that contain parts necessary for the assembly. Do not throw them out!
⬢Remove the top front cardboard insert.
⬢Remove the box on the side containing the extruder parts.
⬢Remove the cardboard insert with the Haribos inside.
⬢Remove the front inner insert.
⬢Remove the box with Prusament on top.
⬢There is a lever inside the top cardboard insert that locks it to the printer’s frame. Pull the lever to unhook the insert.
⬢While pulling the lever, lift the whole insert and remove it.
There are printer parts inside the top cardboard insert! Make sure not to lose them!
⬢Use the side handles on the printer to lift it up.
Do not handle the printer by the top metal profiles!!! Otherwise, you may warp the printer parts and damage the parts such as the LED lighting inside.
Handle the printer in two people by the sides.
⬢Hold the bottom of the box while you lift the printer up.
⬢Good job! The printer is ready for the next step:
⬢Visit chapter 3. Printer set up.
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.