You’d be surprised how many 3D models you can find on the internet are broken in some way. Modern slicers are pretty good at repairing the models without you even noticing. However, not all of the corrupted 3D models can be repaired automatically. Therefore, we would like to give you some tips on how to repair these.
PrusaSlicer will automatically repair models to a certain degree, but it may be necessary to fix the model using a dedicated service. If you are using PrusaSlicer under Windows 10, it will have access to Microsoft's APIs for repairing 3D models through Netfabb.
You can either right-click on the warning symbol found by the name of the model in question (left picture green arrow) or right-click on the model itself and select "Fix by the Netfabb" (right picture red square).
There are several ways to repair a 3D model. You’ll find that sometimes one solution works and another doesn’t, depending on the specific model. We’ll only focus on solutions that are free and easy to use:
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.