IT
  • English
Login
Menu

Colour bleeding

Colour bleeding
Rilevante per:
Ultimo aggiornamento 3 years ago
Colour bleeding
 Difficoltà
Moderato
 Passi
3
 Lingue disponibili
EN

Passo 1 Issue description

Issue description
Issue description
This guide is obsolete. For more info on this topic, please see Volumi di spurgo.
Issue is well known that it leaves traces of previously used colour in each layer as you can see in the picture.
For some filaments or color combinations ( such as black color together with white color ) additional wipe area might be needed. The default value works with most materials and color combinations.

Passo 2 Fix (newer version)

Fix (newer version)
Fix (newer version)
Fix (newer version)
For this step you need Slic3r PE 1.35.1 or newer. Software is part of drivers package prusa3d.com/drivers/
Open Slic3r PE with your model and switch to tab "Print Settings".
Increase the value "Per color change depth" by few millimeters.
Process the G-code again and save it on your SD Card.
Please keep in mind that increasing wipe width causes longer print times and higher material consumption.

Passo 3 Fix (older version)

Fix (older version)
Fix (older version)
Fix (older version)
This step is no longer needed if you have installed Slic3r PE 1.35.1 or newer.
Turn on "Advanced mode" by checking highlighted box.
Increase "Width of wipe" by few millimeters.
Process the G-code again.
Please keep in mind that increasing wipe width causes longer print times and higher material consumption.
Questa guida è stata utile?

Commenti

Hai ancora delle domande?

Hai ancora delle domande?

Se hai una domanda su qualcosa che non è trattato qui, dai un'occhiata alle nostre risorse aggiuntive.
E se questo non dovesse funzionare, è possibile inviare una richiesta a [email protected] o tramite il pulsante qui sotto.

Contattaci