JA
  • English
  • Čeština
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Sample G-codes

Menu
Last updated 2 months ago
This article is also available in following languages: 
ENCSPLDEITFR

Each Original Prusa printer is shipped with a bundle of sample G-codes. These G-codes are tested and tailored specifically for your printer model and can be used either to see the printer capabilities or for troubleshooting.

Find your printer in the table and download the zip archive. Both the model geometry (.stl/.3mf) and the presliced version (.gcode) are included.

You can find all the printable parts on our Printables page.

Original Prusa FFF Series

Printer modelPrinter type3D modelsG-codes
MK4S/MK3.9SFFFlinklink
MK4/MK3.9FFFlinklink*
MK3.5/SFFFTBATBA
MK3S+FFFlinklink
MK3SFFFlinklink
MK3FFFlinklink
MK2.5SFFFTBATBA
MK2.5FFFTBATBA
MINI+FFFlinklink
MINIFFFlinklink
XL 1TFFFlinklink
XL 2TFFFlinklink
XL 5TFFFlinklink
MMU3FFFlinklink
MMU2S & MK3S/+FFFlinklink
MMU2S & MK2.5SFFFlinklink
MMU2 & MK3FFFlinklink
MMU2 & MK2.5FFFlinklink
MMU1 & MK2FFFlinklink

*The archive includes G-codes for both MK4 and MK3.9 printers. G-codes are sliced for Input Shaper and older non-Input Shaper firmware. To print the Input Shaper G-codes, please make sure your printer is running firmware 5.0.0 or newer.

Original Prusa SLA Series

Printer modelPrinter type3D modelsG-codes
Original Prusa SL1SMSLAlinklink
Original Prusa SL1MSLAlinklink

Prusa Pro FFF Series

Printer modelPrinter type3D modelsG-codes
Prusa Pro HT90FFFTBAlink

 

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us