HT90

<p>Original Prusaの磁石付きヒートベッドは、取り外し可能で両面使える柔軟性のあるばね鋼シートを保持するように考えられており、プリント面からプリント物を簡単に取り除くために特別に設計されています。</p>
<p><strong>強度や属性の異なる3種類のシートをご用意してます</strong>。 最初にリリースされたシートは、<strong>両面にスムーズPEIシート</strong>が貼られていました。 第二に、PETGやその他の高粘着性フィラメントを使用した生産性を改善するために開発した、信頼性の高い<strong>テクスチャードパウダーコートシート</strong>の製造が可能になり、自社のプリント工場で数年間使用した後にリリースしました。 最新の追加は<strong>サテンシート</strong>で、テクスチャと特性の両面で、スムーズシートとテクスチャードシートの中間に位置づけられます。 各シートの詳細については、以下にリンクされているそれぞれの記事を参照してください。</p>
<table style="border-collapse: collapse; width: 100%; height: 36px; margin-left: auto; margin-right: auto;" border="0">
<tbody>
<tr style="height: 18px;">
<td style="width: 32.2013%; height: 18px;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2020/12/spring-steel-sheet-smooth-peiKB.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2020/12/spring-steel-sheet-smooth-peiKB-400x400.jpg 400w, http://help.prusa3d.com/wp-content/uploads/2020/12/spring-steel-sheet-smooth-peiKB-600x600.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2020/12/spring-steel-sheet-smooth-peiKB-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2020/12/spring-steel-sheet-smooth-peiKB-768x768.jpg 768w" alt="" width="266" height="266" loading="lazy" /></td>
<td style="width: 32.2013%; height: 18px;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2020/12/powder-coated-spring-steel-sheetKB.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2020/12/powder-coated-spring-steel-sheetKB-400x400.jpg 400w, http://help.prusa3d.com/wp-content/uploads/2020/12/powder-coated-spring-steel-sheetKB-600x600.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2020/12/powder-coated-spring-steel-sheetKB-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2020/12/powder-coated-spring-steel-sheetKB-768x768.jpg 768w" alt="" width="266" height="266" loading="lazy" /></td>
<td style="width: 32.2013%; height: 18px;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2020/12/double-sided-powder-coated-satin-spring-steel-sheetKB.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2020/12/double-sided-powder-coated-satin-spring-steel-sheetKB-400x400.jpg 400w, http://help.prusa3d.com/wp-content/uploads/2020/12/double-sided-powder-coated-satin-spring-steel-sheetKB-600x600.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2020/12/double-sided-powder-coated-satin-spring-steel-sheetKB-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2020/12/double-sided-powder-coated-satin-spring-steel-sheetKB-768x768.jpg 768w" alt="" width="266" height="266" loading="lazy" /></td>
</tr>
<tr style="height: 18px;">
<td style="width: 32.2013%; height: 18px; text-align: center;"><a href="http://help.prusa3d.com/ja/article/smooth-steel-sheet_196550">スムーズシート</a></td>
<td style="width: 32.2013%; height: 18px; text-align: center;"><a href="http://help.prusa3d.com/ja/article/textured-steel-sheet_196534">テクスチャードシート</a></td>
<td style="width: 32.2013%; height: 18px; text-align: center;"><a href="http://help.prusa3d.com/ja/article/satin-steel-sheet_196526">サテンシート</a></td>
</tr>
<tr>
<td style="width: 32.2013%; text-align: center;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_underside2.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_underside2-398x400.jpg 398w, http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_underside2-598x600.jpg 598w, http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_underside2-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_underside2-768x771.jpg 768w" alt="" width="266" height="267" loading="lazy" /></td>
<td style="width: 32.2013%; text-align: center;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_underside2.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_underside2-398x400.jpg 398w, http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_underside2-598x600.jpg 598w, http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_underside2-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_underside2-768x771.jpg 768w" alt="" width="266" height="267" loading="lazy" /></td>
<td style="width: 32.2013%; text-align: center;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/01/satin_underside2.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/01/satin_underside2-398x400.jpg 398w, http://help.prusa3d.com/wp-content/uploads/2021/01/satin_underside2-598x600.jpg 598w, http://help.prusa3d.com/wp-content/uploads/2021/01/satin_underside2-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/01/satin_underside2-768x771.jpg 768w" alt="" width="266" height="267" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3><strong>一般情報</strong></h3>
<p>取り外し可能なスチールシートは、ヒートベッドの裏に接着されている多数の磁石によって所定の位置に保持されます。 ヒートベッドの上部には、スチールシート（右の写真）のノッチと完全に一致する2つのピン（左の写真）があります。 <em>スチールシートをヒートベッドに取り付ける前に、ヒートベッド表面がきれいで、フィラメントのゴミなどがないことを確認してください。</em></p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="http://help.prusa3d.com/wp-content/uploads/prusuki/prusuki-images/aligning-pins.jpg" /></p>
<div>
<div class="note-callout">スチールシートの切り欠きの反対側にある2つの穴は無視してください。 それらは製造工程のものであり、ベッド上でシートを整列させるためのものではありません。</div>
</div>
<h3>スチールシートプロファイル</h3>
<p>シート毎に厚さがわずかに異なるため、各シートには異なるLive Adjust Z値が必要です。 複数のシートを使用している場合は、各シートのLive Adjust Z値を[Steel sheet profiles]に保存して切替て使うことができます。 詳細については、記事<a href="http://help.prusa3d.com/ja/article/steel-sheet-profiles_1955">Steel sheet profiles</a>を参照してください。</p>
<h3>プリントの取り外し</h3>
<p>プリントオブジェクトをプリント面から取り外すには、必ずスチールシートが<strong>室温まで冷えるまで</strong>待ってください。 次に、シートを内側と外側に<strong>曲げて</strong>取り外すことができますが、シートの損傷を防ぐため、ある場面ではへらでアシストしながら剥がしていくことが必要になります。 <strong>PETG、ASA、ABSやPCブレンドなどの素材の場合、または第1層の面積が大きいプリントの場合、もしくはその両方の場合、スティックのりで保護分離層を形成することが必要になる場合があります。</strong></p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="http://help.prusa3d.com/wp-content/uploads/2021/01/Screenshot-bendsheet3.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/01/Screenshot-bendsheet3-600x137.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2021/01/Screenshot-bendsheet3-800x183.jpg 800w, http://help.prusa3d.com/wp-content/uploads/2021/01/Screenshot-bendsheet3-300x69.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/01/Screenshot-bendsheet3-768x176.jpg 768w, http://help.prusa3d.com/wp-content/uploads/2021/01/Screenshot-bendsheet3-1536x351.jpg 1536w" alt="" width="800" height="183" loading="lazy" /></p>
<div>
<p>万が一、冷やしてもうまく剥がせなかったり、剥がすときに表面が傷ついたり（表面の一部がはがれたり、ひびが入ったり）した場合は、この種のプリントシートに適していないフィラメントを使用しているか、表面が正しく準備されていない可能性があります。フィラメントとプリントシートの互換性と表面処理については、こちら <a href="https://help.prusa3d.com/materials">Material table</a> をご覧ください。</p>
<p>模型の取り外しにヘラを使う場合は、シートの表面を傷つけないように注意してください。平らな面で模型の下を掘るのではなく、可能な限りシートを少し曲げ、模型の下にヘラを差し込みます。</p>
<p>プリント表面から離れない頑固なプリントの場合、ヒートベッドを数分間（元のプリント温度まで）再加熱し、再び冷ましてみてください。こうすることで、プリント面にくっつきすぎているプリントを取り除くことができる場合があります。</p>
</div>
<div class="warning-callout">プリントシート（サテン、スムース、テクスチャード等）などの消耗部品は、コーティングが時間の経過とともに劣化するため、保証対象外です。 材料または製造上の欠陥により故障が発生した場合を除き、傷、へこみ、ひび割れなどの外観上の損傷も保証の対象とはなりません。到着時のシートの不良のみが保証の対象となります。</div>
<h3>シートの違い</h3>
<p>適切にクリーニングし、最初のレイヤー（Live Adjust Z値）を正しく設定すれば、ほぼすべての種類の材料をプリントするのにすべてのシートが使えます。 ただし、特定の材料やモデルに1枚または他のシートを割当てることで特定の利点があります。</p>
<div class="warning-callout">スムーズシートとテクスチャードシートでは厚さが異なるため、<a href="http://help.prusa3d.com/ja/article/first-layer-calibration-i3_112364">First Layer Calibration (i3)</a>をやり直すか、各々別の <a href="http://help.prusa3d.com/ja/article/steel-sheet-profiles_1955">Steel sheet profiles</a>を登録して切替える必要があります。</div>
<div>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 32.1298%;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_close_up_scaled.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_close_up_scaled-400x400.jpg 400w, http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_close_up_scaled-600x600.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_close_up_scaled-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_close_up_scaled-768x768.jpg 768w, http://help.prusa3d.com/wp-content/uploads/2021/01/Smooth_close_up_scaled-1536x1536.jpg 1536w" alt="" width="266" height="266" loading="lazy" /></td>
<td style="width: 32.1298%;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_close_up_scaled.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_close_up_scaled-400x400.jpg 400w, http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_close_up_scaled-600x600.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_close_up_scaled-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_close_up_scaled-768x768.jpg 768w, http://help.prusa3d.com/wp-content/uploads/2021/01/TXT_close_up_scaled-1536x1536.jpg 1536w" alt="" width="266" height="266" loading="lazy" /></td>
<td style="width: 32.2418%;"><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2021/01/Satin_close_up_scaled.jpg" sizes="100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2021/01/Satin_close_up_scaled-400x400.jpg 400w, http://help.prusa3d.com/wp-content/uploads/2021/01/Satin_close_up_scaled-600x600.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2021/01/Satin_close_up_scaled-300x300.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2021/01/Satin_close_up_scaled-768x768.jpg 768w, http://help.prusa3d.com/wp-content/uploads/2021/01/Satin_close_up_scaled-1536x1536.jpg 1536w" alt="" width="266" height="266" loading="lazy" /></td>
</tr>
<tr>
<td style="width: 32.1298%; text-align: center;">
<p><em>スムーズシートでプリントされたオブジェクトの拡大写真</em></td>
<td style="width: 32.1298%; text-align: center;"><em>テクスチャードシートでプリントされたオブジェクトの拡大写真</em></td>
<td style="width: 32.2418%; text-align: center;"><em>サテンシートでプリントされたオブジェクトの拡大写真</em></td>
</tr>
</tbody>
</table>
</div>
<h4>スムーズPEIシート</h4>
<p>このシートの両面は、スムーズなPEIプラスチック製のフィルムで覆われています。 これは、前身のMK2Sプリンターで使用されていたものと同じ実績のあるプリント表面です。 小さな領域がプリント面に接触している、または鋭い角があるプリントオブジェクトは、スムーズスチールシートでプリントすると剥離する可能性が低くなります。 一部のユーザーは、プリントが平滑で光沢のある底面になることが気に入っています。 <strong>スムーズシートの詳細と考慮する内容については、<a href="http://help.prusa3d.com/ja/article/smooth-steel-sheet_196550">Smooth Steel Sheet</a>を参照してください。</strong></p>
<h4>パウダーコートのテクスチャードシート</h4>
<p>このシートの表面は、完全な接着を確実にするために特殊なポリマー（Ultem）で覆われています。 粉体塗装されたスチールシートは、PETG、CPE、Flexfill（TPU）など、スムーズシートに接着しすぎる傾向があるが、テクスチャ表面からは簡単に取り外すことができる材料でオブジェクトをプリントするのに適しています。 <strong>テクスチャシートの詳細と考慮する内容については、<a href="http://help.prusa3d.com/ja/article/textured-steel-sheet_196534">Textured steel sheet</a>を参照してください。</strong></p>
<h4>サテンシート</h4>
<p>サテンシートは、プリントシートのラインナップをさらに充実させました。パウダーコーティングされた表面は軽くマットな質感で、最適なレベルの接着性を持ち、一般的なフィラメントからあまり一般的でないフィラメントまで幅広く対応します。<strong>サテンシートの詳細と考慮する内容については、<a href="http://help.prusa3d.com/ja/article/satin-steel-sheet_196526">Satin steel sheet</a>を参照してください。</strong></p>
<h3>フィラメント</h3>
<p>私たちは多くのテストを行い、ユーザーに使用できるように結果をまとめてあります。 フィラメントタイプに合ったシートを準備する方法を簡単に確認するには、 <a href="https://help.prusa3d.com/en/materials"><strong>材料テーブルを参照<strong></a>してください。</p>
<p><img decoding="async" src="http://help.prusa3d.com/wp-content/uploads/2022/03/Screenshot-material-table2.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="http://help.prusa3d.com/wp-content/uploads/2022/03/Screenshot-material-table2-600x294.jpg 600w, http://help.prusa3d.com/wp-content/uploads/2022/03/Screenshot-material-table2-800x392.jpg 800w, http://help.prusa3d.com/wp-content/uploads/2022/03/Screenshot-material-table2-300x147.jpg 300w, http://help.prusa3d.com/wp-content/uploads/2022/03/Screenshot-material-table2-768x376.jpg 768w, http://help.prusa3d.com/wp-content/uploads/2022/03/Screenshot-material-table2-1536x752.jpg 1536w, http://help.prusa3d.com/wp-content/uploads/2022/03/Screenshot-material-table2.jpg 1600w alt="" width="1780" height="872" loading="lazy" /></p>
<p style="text-align: right;"><em>*このスクリーンショットの値は最新ではない可能性があります。</em></p>
<h3>プリントがくっつかない</h3>
<p>プリント表面が完璧にきれいで、90％のイソプロピルアルコールを浸したペーパータオルで拭いてすべての脂分を取り除いていて、さらに最初の層の高さが完全に設定されていても、プリントオブジェクトがプリント面に確実に接着しない場合は、<a href="http://help.prusa3d.com/ja/article/first-layer-issues_1804">1層目の問題</a>をチェックしてください。</p>


柔軟性のあるスチールシート(ガイドポスト)

<p>Each Original Prusa printer is shipped with a bundle of sample G-codes. These G-codes are tested and tailored specifically for your printer model and can be used either to see the printer capabilities or for troubleshooting.</p>
<p>Find your printer in the table and download the zip archive. Both the model geometry (.stl/.3mf) and the presliced version (.gcode) are included.</p>
<div class="tip-callout">You can find all the printable parts on our <a href="https://www.printables.com/@Prusa3D/collections/54487">Printables page</a>.</div>
<h2>Original Prusa FFF Series</h2>
<table class="striped" style="width: 100%; height: 594px;">
<tbody>
<tr style="height: 18px;">
<td style="width: 33.1288%; height: 18px; text-align: left;"><strong>Printer model</strong></td>
<td style="width: 16.9325%; text-align: left; height: 18px;"><strong>Printer type</strong></td>
<td style="width: 25.0307%; height: 18px; text-align: left;"><strong>3D models</strong></td>
<td style="width: 25.0307%; text-align: left;"><strong>G-codes</strong></td>
</tr>
<tr>
<td style="width: 33.1288%;">MK4S/MK3.9S</td>
<td style="width: 16.9325%;">FFF</td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK4S-MK39S-3dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK4S-MK3.9S-gcodes.zip">link</a></td>
</tr>
<tr style="height: 18px;">
<td style="width: 33.1288%; height: 18px;">MK4/MK3.9</td>
<td style="width: 16.9325%; height: 18px;">FFF</td>
<td style="width: 25.0307%; height: 18px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK4-MK39-3dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK4-MK39-gcodes.zip">link</a>*</td>
</tr>
<tr>
<td style="width: 33.1288%;">MK3.5/S</td>
<td style="width: 16.9325%;">FFF</td>
<td style="width: 25.0307%;">TBA</td>
<td style="width: 25.0307%;">TBA</td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MK3S+</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3family-3dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3S%2B_MK3S_MK3-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MK3S</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3family-3dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3S%2B_MK3S_MK3-gcodes.zip">link</a></td>
</tr>
<tr style="height: 18px;">
<td style="width: 33.1288%; height: 18px;">MK3</td>
<td style="width: 16.9325%; height: 18px;">FFF</td>
<td style="width: 25.0307%; height: 18px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3family-3dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3S%2B_MK3S_MK3-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MK2.5S</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;">TBA</td>
<td style="width: 25.0307%;">TBA</td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MK2.5</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;">TBA</td>
<td style="width: 25.0307%;">TBA</td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MINI+</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MINI%2B_MINI-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MINI%2B_MINI-gcodes.zip">link</a></td>
</tr>
<tr style="height: 18px;">
<td style="width: 33.1288%; height: 18px;">MINI</td>
<td style="width: 16.9325%; height: 18px;">FFF</td>
<td style="width: 25.0307%; height: 18px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MINI%2B_MINI-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MINI%2B_MINI-gcodes.zip">link</a></td>
</tr>
<tr style="height: 18px;">
<td style="width: 33.1288%; height: 18px;">XL 1T</td>
<td style="width: 16.9325%; height: 18px;">FFF</td>
<td style="width: 25.0307%; height: 18px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/XL-1T-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/XL-1T-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">XL 2T</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/XL-2T-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/XL-2T-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">XL 5T</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/XL-5T-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/XL-5T-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MMU3</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MMU3-MK3S-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MMU3-MK3S-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MMU2S &amp; MK3S/+</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MMU2S_MMU2-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3S%2B_MK3S_MMU2S-gcodes.zip">link</a></td>
</tr>
<tr>
<td style="width: 33.1288%;">MMU2S &amp; MK2.5S</td>
<td style="width: 16.9325%;">FFF</td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MMU2S_MMU2-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK25S_MMU2S-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MMU2 &amp; MK3</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MMU2S_MMU2-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK3_MMU2-gcodes.zip">link</a></td>
</tr>
<tr>
<td style="width: 33.1288%;">MMU2 &amp; MK2.5</td>
<td style="width: 16.9325%;">FFF</td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MMU2S_MMU2-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK25_MMU2-gcodes.zip">link</a></td>
</tr>
<tr style="height: 36px;">
<td style="width: 33.1288%; height: 36px;">MMU1 &amp; MK2</td>
<td style="width: 16.9325%; height: 36px;">FFF</td>
<td style="width: 25.0307%; height: 36px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MMU1-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/MK2MMU-gcodes.zip">link</a></td>
</tr>
</tbody>
</table>
<p><em>*The archive includes G-codes for both MK4 and MK3.9 printers. G-codes are sliced for Input Shaper and older non-Input Shaper firmware. To print the Input Shaper G-codes, please make sure your printer is running <a href="https://help.prusa3d.com/downloads">firmware 5.0.0 or newer</a>.</em></p>
<h2>Original Prusa SLA Series</h2>
<table class="striped" style="width: 100%; height: 73px;">
<tbody>
<tr style="height: 21px;">
<td style="width: 33.1288%; height: 21px; text-align: left;"><strong>Printer model</strong></td>
<td style="width: 16.9325%; text-align: left; height: 21px;"><strong>Printer type</strong></td>
<td style="width: 25.0307%; height: 21px; text-align: left;"><strong>3D models</strong></td>
<td style="width: 25.0307%; text-align: left; height: 21px;"><strong>G-codes</strong></td>
</tr>
<tr style="height: 21px;">
<td style="width: 33.1288%; height: 21px;">Original Prusa SL1S</td>
<td style="width: 16.9325%; height: 21px;">MSLA</td>
<td style="width: 25.0307%; height: 21px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/SL1S-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%; height: 21px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/SL1S-gcodes.zip">link</a></td>
</tr>
<tr style="height: 21px;">
<td style="width: 33.1288%; height: 21px;">Original Prusa SL1</td>
<td style="width: 16.9325%; height: 21px;">MSLA</td>
<td style="width: 25.0307%; height: 21px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/SL1-3Dmodels.zip">link</a></td>
<td style="width: 25.0307%; height: 21px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/SL1-gcodes.zip">link</a></td>
</tr>
</tbody>
</table>
<h2>Prusa Pro FFF Series</h2>
<table class="striped" style="width: 100%; height: 31px;">
<tbody>
<tr style="height: 21px;">
<td style="width: 33.1288%; height: 21px; text-align: left;"><strong>Printer model</strong></td>
<td style="width: 16.9325%; text-align: left; height: 21px;"><strong>Printer type</strong></td>
<td style="width: 25.0307%; height: 21px; text-align: left;"><strong>3D models</strong></td>
<td style="width: 25.0307%; text-align: left; height: 21px;"><strong>G-codes</strong></td>
</tr>
<tr style="height: 10px;">
<td style="width: 33.1288%; height: 10px;">Prusa Pro HT90</td>
<td style="width: 16.9325%; height: 10px;">FFF</td>
<td style="width: 25.0307%; height: 10px;">TBA</td>
<td style="width: 25.0307%; height: 10px;"><a href="https://www.prusa3d.com/downloads/SampleModelsGcodes/HT90-gcodes.zip">link</a></td>
</tr>
</tbody>
</table>
<p> </p>


Sample G-codes

<p>The Prusa PRO HT90 uses quick-swap REVO nozzles. To change a nozzle, go to <em>More -&gt; Nozzle</em> change in the printer menu.</p>
<p>If the nozzle is too hot at this point, you will be presented with a warning. Select <em>Cooldown and continue</em> and wait until the nozzle's temperature reaches safe levels.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/969715a26465032ed77107eedc36adba.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Nozzle replacement (HT90)" alt="" width="250" height="427" loading="lazy" /></p>
<p>Once the nozzle's temperature is under 60 °C, you will be presented with a screen depicting the direction in which you should unscrew the nozzle. Keep in mind that the nozzle's thread is longer (see the photo below).</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.8358%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/232d06451c684158bef54fc88db7371b.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Nozzle replacement (HT90)" alt="" width="250" height="428" loading="lazy" /></td>
<td style="width: 48.8358%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/7c3cdb0475bbdfe5a54acd769278a743.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Nozzle replacement (HT90)" alt="" width="400" height="277" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p>Once the nozzle is out, select Continue on the screen. You will be presented with a menu where you can select which type of nozzle you wish to install. The standard type is the <a href="http://help.prusa3d.com/ja/article/high-flow-print-head-ht90_727185">HF (High Flow) nozzle</a>. The ObXidian is ideal for composite materials (e.g., containing carbon fiber) on the High-flow print head. The <a href="http://help.prusa3d.com/ja/article/high-temperature-print-head-ht90_726478">HT-A</a> is designed for high-temperature abrasive materials, such as PEI CF, PEKK CF, and similar.</p>
<p>Once you select the nozzle type, you must also pick the correct diameter. The standard diameter for the High-flow print head nozzle is 0.4 mm and for the High-temperature print head is 0.6 mm.</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.8358%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/d321201344d26c9bc1bcee48053818c8.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Nozzle replacement (HT90)" alt="" width="250" height="427" loading="lazy" /></td>
<td style="width: 48.8358%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/54c2a7935864732efba3d7be327156ae.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Nozzle replacement (HT90)" alt="" width="250" height="427" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p>Finally, screw in the selected nozzle and confirm that the change is done by choosing the <em>Save and Close</em> button on the screen.</p>
<p></p>


Nozzle replacement (HT90)

<p>The default print head on the <strong>Prusa Pro HT90</strong> is a high-flow print head. This allows a high volumetric rate which will let you print faster. The print head also has a fan control that uses a servo motor.</p>
<div class="tip-callout">It is also possible to install a <a href="http://help.prusa3d.com/ja/article/high-temperature-print-head-ht90_726478">High-temperature</a> print head.</div>
<p>You can identify that the high flow print head is installed when it shows a blue stripe.</p>
<h3>Nozzle</h3>
<p>The high flow print head comes with a <a href="https://e3d-online.com/products/revo-high-flow-nozzles">Revo High flow nozzle</a>. Note that this nozzle is not resistant to abrasive filaments, as it is made of brass.</p>
<p>If you wish to print with abrasive filaments, use the <a href="https://e3d-online.com/products/revo-obxidian-nozzles">Revo ObXidian Nozzle</a>.</p>
<p>The nozzle can be changed by screwing and unscrewing by hand, no tools should be used. For that, follow the instructions here: <a href="http://help.prusa3d.com/ja/article/nozzle-replacement-ht90_727166">Nozzle replacement (HT90) [進行中の翻訳]</a>.</p>
<ul>
<li>Recommended cleaning methods:
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>Cleaning filament</li>
<li>Warm pull</li>
<li>Cold pull</li>
<li>Brass brush for the outside</li>
</ul>
</li>
</ul>
</li>
<li>Non-recommended cleaning methods:
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>Needle</li>
<li>Steel wire brush</li>
<li>Blow torch</li>
</ul>
</li>
</ul>
</li>
</ul>
<p> </p>
<p></p>


High flow print head (HT90)

<p>The <strong>Prusa Pro HT90</strong> comes with a high-temperature print head that can be <a href="http://help.prusa3d.com/ja/article/changing-the-print-head_726486">installed</a> in the printer.</p>
<div class="tip-callout">The default on the printer is the <a href="http://help.prusa3d.com/ja/article/high-flow-print-head-ht90_727185">High-flow print head</a>.</div>
<p>The print head can reach temperatures up to 500 ºC, covering most available materials, including PEI (Ultem). Additionally, the nozzle is abrasion-resistant.</p>
<p>The print head features a manual flap adjustment for the cooling air, allowing you to control the airflow from fully closed to fully open.</p>
<p>Before starting a print, the printer will display the recommended flap adjustment based on the loaded GCode.</p>
<table style="border-collapse: collapse; width: 100%; border-style: none; margin-left: auto; margin-right: auto;" border="0">
<tbody>
<tr>
<td style="width: 32.2074%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/a23f9d1ebb72abc9373d64b021a057cc.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Flap Adjustment (HT90)" alt="" width="250" height="188" loading="lazy" /></td>
<td style="width: 32.2074%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/7ee89c8f90f8bf48e5e7d7f631914b3b.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Flap Adjustment (HT90)" alt="" width="250" height="188" loading="lazy" /></td>
<td style="width: 32.2082%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/06/cf8ff0664755b9cf648fec23d71d2496.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Flap Adjustment (HT90)" alt="" width="250" height="188" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3>Nozzle</h3>
<p>The high-temperature print head has a <a href="https://e3d-online.com/products/high-flow-high-temperature-abrasive-nozzles">0.6mm Revo high-temperature, high-flow, abrasion-resistant nozzle</a>. The nozzles are composed of copper with a hardened steel tip, and coated with chromium nitride.</p>
<p>The nozzle can be changed by screwing and unscrewing by hand, no tools should be used. For that, follow the instructions here: <a href="http://help.prusa3d.com/ja/article/nozzle-replacement-ht90_727166">Nozzle replacement (HT90) [進行中の翻訳]</a>.</p>
<ul>
<li>Recommended cleaning methods:
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>Cleaning filament</li>
<li>Warm pull</li>
<li>Cold pull</li>
<li>Brass brush for the outside</li>
</ul>
</li>
</ul>
</li>
<li>Non-recommended cleaning methods:
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>Needle</li>
<li>Steel wire brush</li>
<li>Brow torch</li>
</ul>
</li>
</ul>
</li>
</ul>
<p>The hardness of the HT-Abrasive coating can cause small particles to detach from the bristles of the brass brush and create dusting over the nozzle. This will give the nozzle a brass-coloured sheen. However, the coating itself is still very much intact, and there will be no compromise to wear performance.</p>
<p></p>


High temperature print head (HT90)

プリンターの説明

プリンターの機能

shop.prusa3d.comで購入する前または後に興味があるかもしれないFAQおよび他の有用な情報

一般情報

3Dプリンターとその機能の基本的な概要に加えて、PrusaResearchの一般的な情報。

あなたのプリンターについて

材料ガイド

プリンターメンテナンス

Prusa Connect [進行中の翻訳]

このセクションでは、材料ガイド、プリンタのトラブルシューティング、およびプリンタの使用に関する一般的な情報を見つけることができます。

このプリンターを使用

プリント品質のトラブルシューティング

プリンタートラブルシューティング

Description of how to recognize and solve common problems, especially hardware and electronics related. [進行中の翻訳]

Troubleshooting [進行中の翻訳]

General [進行中の翻訳]

PrusaSlicerスライシングソフトウェアの公式ドキュメント。 基本構成からモディファイヤメッシュなどの詳細設定まで。

PrusaSlicer

<p>When slicing a project for the Prusa Pro HT90, the PrusaSlicer needs a specific profile that is not pre-installed in the first download of the program. These profiles are only available if you have purchased the printer. After receiving the printer, your PrusaAccount will be associated with the HT90. The Prusa Account can be used directly in the PrusaSlicer to download the profiles, or you can download them from our <a href="https://help.prusa3d.com/">Help </a> page.</p>
<h3>Prusa Account</h3>
<p>The presets are automatically downloaded when you log in to your Prusa Account in PrusaSlicer.</p>
<ol>
<li>On the top right of the PrusaSlicer, log in to your Prusa Account using an account registered to your HT90.</li>
<li>On the top menu, go to<em> Configuration -&gt; Configuration Wizard</em>.</li>
<li>Find the Prusa Pro HT on the right side menu in the Configuration Wizard.</li>
<li>Select all that apply, click "Next" to continue the configuration, or click "Finish" to return to the main Plater.</li>
</ol>
<table style="border-collapse: collapse; width: 100.026%; height: 20.8px;" border="0">
<tbody>
<tr style="height: 20.8px;">
<td style="width: 48.7906%; height: 20.8px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/53f66fec2f78b743bd90de168fc8ab08.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="400" height="221" loading="lazy" /></td>
<td style="width: 48.7906%; height: 20.8px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/fecce14caa3560be28722a915ba11eb5.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="400" height="275" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/b1408dbfa5fb6bb6e6c74584ceda0d0b_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="500" height="340" loading="lazy" /></p>
<h3>Download from printer</h3>
<p>Starting from firmware 1.1.0, it is possible to download the PrusaSlicer profiles from your printer. Note that it is important that a <strong>USB drive</strong> is connected to the printer to download the profiles. For the download, go to the printer menu at <em>More -&gt; Slicer Profiles</em> and click continue. A new page will open with the option <strong>Export slicer profiles to USB</strong>.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/b9958aed291ac29c447c85a1ecfd27f8.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="350" height="584" loading="lazy" /></p>
<h3>Download from Web Interface</h3>
<p>Go to the printer's menu at More -&gt; Settings -&gt; Network, and copy the IPv4 to your browser. On the web interface, go to <strong>Slicer </strong>on the left side and click to <strong>download slicer profiles</strong>.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/f8b74599a546af53dba1f448f3a62334.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="500" height="342" loading="lazy" /></p>
<h3>Download from Slicer</h3>
<p>If you do not wish to connect your PrusaSlicer to the Prusa Account, it is possible to download the presets directly in PrusaSlicer.</p>
<ol>
<li>On the top left go to <em>Menu -&gt; Configuration -&gt; Configuration Wizard</em>.</li>
</ol>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/fecce14caa3560be28722a915ba11eb5.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="400" height="275" loading="lazy" /></p>
<ol start="2">
<li>Go to Configuration Sources on the left menu and click the "<a href="https://prusa.io/prusaslicer-profiles" target="_blank" rel="noopener">our website</a>" link.</li>
</ol>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/48a42049229088457373f12fc0ea36b9_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="500" height="340" loading="lazy" /></p>
<ol start="3">
<li>This will direct you to the page where you can find all PrusaSlicer official profiles. Download the Prusa Pro HT profiles. If you do not see the HT90 profile go to the top right and log in with the account where the HT90 is registered. </li>
</ol>
<table style="border-collapse: collapse; width: 100.026%;" border="0">
<tbody>
<tr>
<td style="width: 48.7906%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/999df88aaef2436c3510d8376d3d3c99_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></td>
<td style="width: 48.7906%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/68e5d74654d194a753bde22e97f67024_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<ol start="4">
<li>In PrusaSlicer, click "Load".</li>
</ol>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/124a55aa250f5e0a0c989da0b37ab8c0_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="500" height="341" loading="lazy" /></p>
<ol start="5">
<li>Select the .zip file with the presets. Do not unzip the file.</li>
</ol>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/3a466b91660992e461daab6805699393_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="500" height="341" loading="lazy" /></p>
<ol start="6">
<li>Click "Next", and the configurations will be shown.</li>
</ol>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/02592ab37c6f1c5dd104d80017efbebf_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="500" height="340" loading="lazy" /></p>
<ol>
<li>Find the Prusa Pro HT on the right side menu in the Configuration Wizard.</li>
</ol>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/b1408dbfa5fb6bb6e6c74584ceda0d0b_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Importing profiles (HT90) REVIEW" alt="" width="500" height="340" loading="lazy" /></p>
<ol>
<li>Select all that apply, click "Next" to continue the configuration, or click "Finish" to return to the main Plater.</li>
</ol>
<p></p>


Importing profiles (HT90)

<h3>Basic info</h3>
<p>Ultem, also known as PEI (Polyetherimide), is a high-performance thermoplastic material ideal for 3D printing. Its extreme resistance to heat and chemicals makes it an excellent choice for demanding applications. With a temperature range from -70°C to over 200°C, Ultem offers high stability and strength across a wide range of environments. While it requires stable printing conditions and specialized equipment, the results are precise and durable. Ultem is particularly suitable for the automotive, aerospace, medical device industries, and prototyping, handling the challenges of even the most demanding environments.</p>
<div><strong>Recommended nozzle temperature:</strong> 370 - 420 °C</div>
<div> </div>
<div><strong>Recommended bed temperature:</strong> 150 - 155 °C</div>
<div> </div>
<div><strong>Recommended chamber temperature:</strong> 85 - 90 °C</div>
<div> </div>
<div><strong>Recommended drying temperature:</strong> 130 - 150 °C (ensure the filament spool can withstand these temperatures)</p>
<div class="warning-callout">For precise temperature settings, please follow the manufacturer's guidelines.</div>
</div>
<div> </div>
<h3>Description</h3>
<div>
<p>PEI 9085 and PEI 1010</p>
</div>
<table class="striped">
<tbody>
<tr>
<th>
<p>Pros</p>
</th>
<th>
<p>Cons</p>
</th>
</tr>
<tr>
<td>
<p>✔ High-temperature resistance (over 200°C)</p>
</td>
<td>
<p>✖ Higher cost</p>
</td>
</tr>
<tr>
<td>
<p>✔ Exceptional chemical resistance</p>
</td>
<td>
<p>✖ Susceptible to warping</p>
</td>
</tr>
<tr>
<td>
<p>✔ Radiation resistance</p>
</td>
<td>
<p>✖ Square objects are prone to warping.</p>
</td>
</tr>
<tr>
<td>
<p>✔ Suitable as an insulating material</p>
</td>
<td>
<p>✖ Highly hygroscopic (absorbs moisture) – requires <br />drying and use of a dry box for storage and during printing.</p>
</td>
</tr>
<tr>
<td>✔ Self-extinguishing</td>
<td>
<p>✖ Requires adhesives for better adhesion to the print <br />bed</p>
</td>
</tr>
<tr>
<td>✔ Dimensional stability during printing</td>
<td>
<p>✖ Support removal can be difficult</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<h3>Tips for successful printing</h3>
<p>Clean and calibrate the printer.<br />Use a drybox to keep the filament dry.</p>
<p>Speed: Slower than usual.<br />Adhesion: 2-3 layers of Magigoo HT and use a brim.</p>
<p>Use a brim to enhance first layer adhesion.</p>
<p>Monitor the print closely.<br />Remove print quickly to avoid stress.<br />Remove supports while warm.</p>
<p> </p>
<h3>Sample prints</h3>
<table style="border-collapse: collapse; width: 100%; height: 589px;" border="0">
<tbody>
<tr style="height: 300px;">
<td style="width: 48.805%; height: 300px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/607dd11bd86e49eb6d1a58838313d2e3.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEI (Ultem)" alt="" width="1826" height="1219" loading="lazy" /></td>
<td style="width: 48.805%; height: 300px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/4e0dbdd080f6044d477938cc243d631d.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEI (Ultem)" alt="" width="1826" height="1219" loading="lazy" /></td>
</tr>
<tr style="height: 300px;">
<td style="width: 48.805%; height: 300px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/f47bc2eed163da6445fbf1a0a472b051.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEI (Ultem)" alt="" width="1826" height="1219" loading="lazy" /></td>
<td style="width: 48.805%; height: 300px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/826def0cf604c9f1094d42938042977d.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEI (Ultem)" alt="" width="1826" height="1219" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p> </p>
<p></p>


PEI (Ultem)

<p>Some materials are hygroscopic, meaning it is necessary to dry them before printing and keep them in an environment with as low humidity as possible during printing. We offer the Prusa Pro Filament Drybox to be used with highly hygroscopic materials during the printing process. It can be purchased separately from your printer.</p>
<div class="tip-callout">It is also possible to get a <a href="https://www.prusa3d.com/product/memmert-uf30-filament-dryer/"> Professional Filament Dryer</a> in our e-shop.</div>
<p>This sealed system prevents moisture from entering the external environment, keeping filaments in optimal conditions. The box allows for storage and direct printing. This is crucial for maintaining low filament moisture levels during printing and is essential for high-quality outputs, especially when using sensitive materials.</p>
<p>The Prusa Filament Drybox features a system for maintaining and reducing humidity using silica gel. This material actively absorbs moisture from the environment inside the box, helping to keep the filament dry.<br />For optimum performance, and in some cases even necessity, it is recommended to pre-dry the filament appropriately in a professional dryer and then place it in the Drybox for the first time. This ensures that the filament is in ideal condition for printing.</p>
<table style="border-collapse: collapse; width: 100.0%;" border="0">
<tbody>
<tr>
<td style="width: 33.195%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/451dbcf4c64d75f838e75d3f42490802_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="266" height="199" loading="lazy" /></td>
<td style="width: 35.5368%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/5798f0cd4db77b0b6fc2784cba8cc113_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="266" height="200" loading="lazy" /></td>
<td style="width: 31.2437%;"><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/17833a1078a988d9855592586cd9210e_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="266" height="199" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3>Filament installation</h3>
<ol>
<li>Open the Drybox by unlocking the two hinges on the top.</li>
<li>Place the spool with the filament on the holder in the center and release the filament end.</li>
<li>Thread the filament completely through the white PTFE tube until it comes out on the end of the tube.</li>
<li>Close the Drybox by snapping both hinges shut.</li>
</ol>
<table style="border-collapse: collapse; width: 100%; height: 590px;" border="0">
<tbody>
<tr style="height: 284.6px;">
<td style="width: 48.8358%; height: 284.6px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/39db808c787979a985a4d2479d290ee5.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
<td style="width: 48.8358%; height: 284.6px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/353aaba496f0db597b0eaa61b10e6504.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
</tr>
<tr style="height: 284.6px;">
<td style="width: 48.8358%; height: 284.6px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/acb8599d8bb6eeb63ce27c25f2a7ac51.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
<td style="width: 48.8358%; height: 284.6px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/55cb79fc4629ca0b79a830fb195d8ea3.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
</tr>
<tr style="height: 20.8px;">
<td style="width: 48.8358%; height: 20.8px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/92543cdacbe1cef9c3789a3a9752bb94.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
<td style="width: 48.8358%; height: 20.8px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/24fc3776467ef7fd9133175f00f3c50a.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3>Printing from the Drybox</h3>
<ol>
<li>Place the Drybox near the printer on the side of the screen.</li>
<li>Load the filament by pushing the filament coming out of the PTFE into the printer until the print head.</li>
<li>After the filament is loaded, push the PTFE into the opening.</li>
</ol>
<table style="border-collapse: collapse; width: 100.0%; height: 305.475px;" border="0">
<tbody>
<tr style="height: 284.675px;">
<td style="width: 49.9878%; height: 284.675px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/cfdb25fed6299df95e36ff7d9475ce26.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
<td style="width: 49.9878%; height: 284.675px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/aed3f90ba52f49a7adf8155608dc1e4a.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
</tr>
<tr style="height: 20.8px;">
<td style="width: 49.9878%; height: 20.8px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/5f0d8c8d8dd4c71e110e0de52c5e3d84.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
<td style="width: 49.9878%; height: 20.8px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/fa6cd33f09d9681f267fe30221a21b0c.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Prusa Pro Filament Drybox" alt="" width="395" height="296" loading="lazy" /></td>
</tr>
</tbody>
</table>
<h3>User manual</h3>
<ul>
<li><a href="https://www.prusa3d.com/downloads/manual/prusa3d_manual_prusa_pro_drybox_en_1_0.pdf">English</a></li>
<li><a href="https://www.prusa3d.com/downloads/manual/prusa3d_manual_prusa_pro_drybox_cs_1_0.pdf">Czech</a></li>
<li><a href="https://www.prusa3d.com/downloads/manual/prusa3d_manual_prusa_pro_drybox_fr_1_0.pdf">French</a></li>
<li><a href="https://www.prusa3d.com/downloads/manual/prusa3d_manual_prusa_pro_drybox_es_1_0.pdf">Spanish</a></li>
<li><a href="https://www.prusa3d.com/downloads/manual/prusa3d_manual_prusa_pro_drybox_pl_1_0.pdf">Polish</a></li>
<li><a href="https://www.prusa3d.com/downloads/manual/prusa3d_manual_prusa_pro_drybox_it_1_0.pdf">Italian</a></li>
<li><a href="https://www.prusa3d.com/downloads/manual/prusa3d_manual_prusa_pro_drybox_de_1_0.pdf">German</a></li>
</ul>
<p></p>


Prusa Pro Filament Drybox

<p>The <strong>Prusa Pro HT90</strong> is engineered for maximum efficiency and reliability. However, it is still a mechanical device with components that require regular maintenance. Follow the guidelines below to keep your printer in perfect condition for as long as possible.</p>
<h3>Flexible steel sheets</h3>
<p>The Prusa Pro HT90 can use three types of print sheets, <strong>Textured</strong>,<strong> Satin</strong>,<strong> </strong>or<strong> PA nylon</strong>. </p>
<h4>Textured sheet</h4>
<p><strong>Never clean a textured sheet with acetone!</strong> This will create micro-cracks in the PEI layer which will cause significant surface deterioration over time.</p>
<p>The surface of this sheet is covered with a special polymer (Ultem) to ensure perfect adhesion. The powder-coated steel sheets are better for printing objects with materials such as PETG, CPE, or Flexfill (TPU) which tend to adhere too much to a smooth surface, but can be more easily removed from the textured one. <strong>For all details and considerations of the Textured sheet, please see <a href="http://help.prusa3d.com/ja/article/textured-steel-sheet_196534">Textured steel sheet</a>.</strong></p>
<h4>Satin sheet</h4>
<p><strong>Never clean a satin sheet with acetone!</strong> This will create micro-cracks in the PEI layer which will cause significant surface deterioration over time.</p>
<p>The Satin sheet further expands our line-up of print sheets. Its powder-coated surface with a lightly textured matte finish offers an optimal level of adhesion and is fully compatible with a wide range of common and less-common filaments. <strong>For all details and considerations of the Satin sheet, please see <a href="http://help.prusa3d.com/ja/article/satin-steel-sheet_196526">Satin steel sheet</a>.</strong></p>
<h4>PA nylon sheet</h4>
<p>Do <strong>not</strong> clean the <strong>PA nylon </strong>sheet with acetone, IPA (isopropyl alcohol), or other alcohol-based solvents (window cleaners, Windex, etc.), as this will damage the surface. Wash the special sheet before every print with clean water (use a wet cloth or sponge), then dry it. Greasy stains, such as fingerprints, can be cleaned with water with dishwashing soap. </p>
<p>The special PA nylon sheet is made for printing polyamides (Nylon) since their adhesion to standard PEI sheets is generally very poor. The sheet comes with a matt texture, similar to the satin steel sheet with a PEI surface. The sheet is compatible with most polyamides and PETG, other materials may have insufficient adhesion and should be printed on our standard PEI sheets. <strong>For all details and considerations of the PA nylon sheet, please see <a href="http://help.prusa3d.com/ja/article/special-pa-nylon-steel-sheet_341570">PA nylon sheet</a></strong>.</p>
<div class="warning-callout">Consumables such as printing plates are not covered by warranty. The warranty only covers consumables if they arrive already damaged or incorrectly manufactured. Print plates are consumables and the warranty only covers defects that become apparent immediately after unpacking.</div>
<h3>Keeping the printer clean</h3>
<p>After several hours of printing, various types of debris can start to accumulate in the printer chamber, such as filament pieces, dust, broken support remnants, etc.</p>
<p>Always ensure that all parts of the printer are clean. You can use a brush, a small broom, or a vacuum cleaner to remove the debris. </p>
<p>Do not clean the printer while it is printing. Clean the printer only after all parts have cooled down and the printer is turned off.</p>
<h3>Nozzle cleaning</h3>
<p>It is fundamental for the hotend and nozzle to be clean. Check the recommended methods and instructions for cleaning a nozzle used in a <a href="http://help.prusa3d.com/ja/article/high-flow-print-head-ht90_727185">high-flow print head</a>, and in a <a href="http://help.prusa3d.com/ja/article/high-temperature-print-head-ht90_726478">high-temp print head</a>. </p>
<h3>Filter replacement</h3>
<p>The top part of the printer's chamber contains a housing with a HEPA filter. This filter needs to be replaced or cleaned regularly. Follow the procedure in the <a href="http://help.prusa3d.com/ja/article/hepa-filter-replacement-ht90_726153">dedicated filter replacement article</a>. </p>
<p></p>


Regular printer maintenance (HT90)

<p>The <strong>Prusa Pro HT90</strong> has firmware installed during production. It is possible to update the firmware in three ways.</p>
<h3>Menu update</h3>
<p>Connect the printer to the internet network. Then select <em>System -&gt; Check for updates</em>. Once the printer finds an update, it can be downloaded even during printing. The update will be installed after the print job is finished.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/296eae8fe7322053d1e51b0f155404cb.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="How to update firmware (HT90)" alt="" width="350" height="593" loading="lazy" /></p>
<h3>Offline update </h3>
<p>The HT90 can be used fully offline. This includes firmware updating. Download the firmware and add it to the root folder of a USB drive. Plug the USB drive with the FW to the LCD port and the printer will recognize it automatically.</p>
<h3>Browser update</h3>
<p>In this way, it is also possible to <strong>downgrade</strong> the firmware. Go to the printer to <em>More -&gt; Settings -&gt; Network</em>, and copy the IPv4 to your browser.</p>
<p>Go to the gears on the top right to open the settings on the web interface. On the new window, go to Versions, and select the Upload button.</p>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 48.8358%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/5ec0ca4e836f3c034ae5259ea1d05460_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="How to update firmware (HT90)" alt="" width="400" height="237" loading="lazy" /></td>
<td style="width: 48.8358%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/86f712d76688c560a97f19c7e3f8e2f4_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="How to update firmware (HT90)" alt="" width="400" height="243" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p></p>


How to update firmware (HT90)

<p>The <strong>Prusa Pro HT90</strong> supports two print head configurations. The default <a href="http://help.prusa3d.com/ja/article/high-flow-print-head-ht90_727185">high flow print head</a> handles materials up to 300°C. For industrial materials like PEI, PEKK, and PEEK, use the <a href="http://help.prusa3d.com/ja/article/high-temperature-print-head-ht90_726478">high temperature print head</a>, which reaches up to 500°C.</p>
<h3>Removing print head</h3>
<ol>
<li>Unload filament and cool the nozzle below 50°C.</li>
<li>Turn off the printer and unplug it from power.</li>
<li>Using a flat-head screwdriver, turn the stoppers by 120° counter-clockwise and remove them. Open the door to the maximum height.<br /><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/89f309eade6c6a6a56ed8ec73845db92_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Changing the print head" alt="" width="400" height="300" loading="lazy" /></li>
<li>At the top of the printer, behind the HEPA filter, there is a connector assembly held by a thumb screw. Undo the screw.<img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/ae02e8af1c6375f33b8705f0d28d0378_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Changing the print head" alt="" width="400" height="300" loading="lazy" /></li>
<li> Pull the entire connector assembly downwards to disconnect it.<br /><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/000fa97f56002b8c9cbddb440b6b6375.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Changing the print head" alt="" width="400" height="300" loading="lazy" /></li>
<li>Open the C-clamp holding the air hose and cable bundle.<br /><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/dc2d28229b9ab0497205c497a7873568_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Changing the print head" alt="" width="400" height="300" loading="lazy" /></li>
<li>Hold the print head with one hand and carefully disconnect the arms from the ball joints with your other hand, one by one. This will release the print head.<img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/46a4536fb9cbe61c3d932ba9e5a73491_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Changing the print head" alt="" width="400" height="300" loading="lazy" /></li>
<li>Remove the PTFE tube collet retainer clip.<img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/68f84d171b860ca8a4e2839344787415_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Changing the print head" alt="" width="400" height="300" loading="lazy" /></li>
<li>Push down the collet, while pulling the PTFE tube out, to remove it.<img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/dd8f0fb4f45f242516fdf7b214fd5556_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="Changing the print head" alt="" width="400" height="300" loading="lazy" /></li>
</ol>
<p> </p>
<h3>Installing print head</h3>
<ol>
<li>Lubricate the ball joints on the new print head with a small amount of PTFE lubricant.</li>
<li>Connect the arms to the ball joints.</li>
<li>Rejoin the C-clamp holder around the air tube and cable bundle.</li>
<li>Insert the PTFE tube into the print head and secure the collet with the retainer clip.</li>
<li>Reconnect the air hose and cable bundle behind the HEPA filter.</li>
<li>Secure the connector assembly with the thumb screw.</li>
<li>Close the cover and reinstall the cover stoppers.</li>
</ol>
<p></p>


Changing the print head

<p>The <strong>Prusa Pro HT90</strong> has a HEPA filter in the upper part of the printer through which air passes from the printer into the room. The filter needs to be replaced every 600 print hours. To replace it, follow the steps below:</p>
<ol>
<li><strong>Ensure that the printer is completely cooled down</strong> to avoid the risk of burns from hot surfaces.</li>
<li>In the LCD Menu, select <em>More -&gt; Move -&gt; Service position</em>. This will move the print head to the service position, providing space for manipulation.</li>
<li>If the doors are not already extended up, do so now.</li>
<li>Take the front part of the filter cover and gently pull it towards you.</li>
</ol>
<table style="border-collapse: collapse; width: 100%;" border="0">
<tbody>
<tr>
<td style="width: 50.0613%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/b4db00917c9daa33c74652bfb18f4914_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="HEPA filter replacement (HT90) REVIEW" alt="" width="1536" height="1152" loading="lazy" /></td>
<td style="width: 50.0613%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/5542ee7e2bccf1993b67ddd529b0d59a.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="HEPA filter replacement (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<ol start="5">
<li>Next, remove the filter by pulling it down by the side loops.</li>
</ol>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/39275f904149c52b41df75adc4da9570_painted.jpeg" sizes="(min-width: 1024px) 820px, 100vw" srcset="HEPA filter replacement (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></p>
<ol start="6">
<li>Insert the new filter until the end.</li>
</ol>
<table style="border-collapse: collapse; width: 100.026%;" border="0">
<tbody>
<tr>
<td style="width: 48.7906%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/b9c1ba40422cc7fe1c4ee3486b641eaf.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="HEPA filter replacement (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></td>
<td style="width: 48.7906%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/6c389c21f3f440d4c0bfc1bd8be3018d.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="HEPA filter replacement (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<ol start="7">
<li>Install the cover by sliding it in the slot.</li>
</ol>
<table style="border-collapse: collapse; width: 100.026%;" border="0">
<tbody>
<tr>
<td style="width: 48.7906%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/3acc30155b4b49661e4f61414dd498f0.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="HEPA filter replacement (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></td>
<td style="width: 48.7906%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/07/b734430405c9405c5a747ac4f3bb3bcf.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="HEPA filter replacement (HT90) REVIEW" alt="" width="400" height="300" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p></p>


HEPA filter replacement (HT90)

<p>PEEK-CF is an advanced thermoplastic filament with excellent mechanical properties and high-temperature resistance. This material is based on polyetheretherketone (PEEK) with added carbon fibers, improving its strength, toughness, and thermal resistance. PEEK-CF filament is known for its high resistance to temperature, chemicals, and wear, making it an ideal choice for applications requiring extreme operating conditions. Due to its ability to print complex geometries with high precision, PEEK-CF filament is suitable for industrial and engineering applications, including aerospace components, automotive parts, medical implants, and prototyping.</p>
<div class="tip-callout">This filament can be printed with the HT90 with the high-temperature print head.</div>
<p><strong>Recommended nozzle temperature:</strong> 380 - 440°C</p>
<p><strong>Recommended bed temperature:</strong> 140 - 155°C</p>
<table class="striped">
<tbody>
<tr>
<th>
<p>Advantages</p>
</th>
<th>
<p>Disadvantages</p>
</th>
</tr>
<tr>
<td>
<p>✔ Extraordinary temperature resistance</p>
</td>
<td>
<p>✖ High cost of filament</p>
</td>
</tr>
<tr>
<td>
<p>✔ Excellent chemical and mechanical resistance</p>
</td>
<td>
<p>✖ Requires adhesives to increase adhesion to the print<br />bed</p>
</td>
</tr>
<tr>
<td>
<p>✔ High precision and dimensional stability</p>
</td>
<td>
<p>✖ Removing supports can be difficult</p>
</td>
</tr>
<tr>
<td>
<p>✔ Low weight due to the presence of carbon fibers</p>
</td>
<td>
<p>✖ Requires drying</p>
</td>
</tr>
<tr>
<td>✔ Self-extinguishing material</td>
<td>
<p> </p>
</td>
</tr>
<tr>
<td>✔ Excellent insulating properties</td>
<td>
<p> </p>
</td>
</tr>
</tbody>
</table>
<h3>Best use</h3>
<p>Lightweight and strong components in aerospace, engine parts and coolers in automotive, medical implants and tools, functional parts of machinery, valves, and pipes.</p>
<h3>Tips for successful printing</h3>
<p>It is essential to keep the filament dry, otherwise, its mechanical properties will significantly deteriorate. PEEK-CF is extremely hygroscopic and begins to absorb moisture from the air within 10 minutes, affecting the resulting quality and strength. Therefore, we recommend drying the filament for at least 4 hours at 130°C before printing and using a dry box (like the <a href="http://help.prusa3d.com/ja/article/prusa-pro-filament-drybox_725964">Prusa Pro Filament Drybox</a>).</p>
<h3>Heated chamber</h3>
<p>An actively heated chamber is necessary to print this material with a temperature of 85°C or higher. A heated chamber is essential for printing high-temperature materials in FFF, due to several reasons:</p>
<ul>
<li><strong>Prevents deformation: </strong>Maintains stable temperatures to reduce deformation and cracking.</li>
<li><strong>Improves layer adhesion:</strong> Supports stronger connections between layers.</li>
<li><strong>Preserves the properties of the material: </strong>Ensures proper crystallization and strength of the material.</li>
<li><strong>Prevents clogging:</strong> Prevents premature cooling of fibers and prevents problems with extrusion.</li>
<li><strong>Improves accuracy:</strong> Reduces thermal expansion and improves dimensional accuracy.</li>
</ul>
<h3>Print surface preparation</h3>
<p>For printing, a special adhesive must be applied to the print bed (e.g., MAGIGOO HT) for the perfect first layer. We recommend using the adhesive in multiple layers.</p>
<h3>Samples</h3>
<table style="border-collapse: collapse; width: 100%;" border="1">
<tbody>
<tr>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/78520cee327cf25c6dacdfe6784ebf3f.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEEK-CF (Polyetheretherketone)" alt="" width="1600" height="1200" loading="lazy" /></td>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/0933dd9d746307c7084f281397313675.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEEK-CF (Polyetheretherketone)" alt="" width="1600" height="1200" loading="lazy" /></td>
</tr>
<tr>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/9a865ff2363c4e5caf402910bbfbab70.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEEK-CF (Polyetheretherketone)" alt="" width="1600" height="1200" loading="lazy" /></td>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/78cbd2170b16656dca828895f05f73b8.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEEK-CF (Polyetheretherketone)" alt="" width="1600" height="1200" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p></p>


PEEK-CF (Polyetheretherketone)

<p>PEKK-CF is an advanced thermoplastic filament combining excellent mechanical properties, high-temperature resistance, and chemical stability. This material is based on polyetherketoneketone (PEKK) with added carbon fibers, improving strength and toughness. </p>
<p>Due to its ability to print complex geometries with high precision, PEKK-CF filament is suitable for industrial and engineering applications such as aerospace components, automotive parts, medical implants, and prototypes.</p>
<div class="tip-callout">This filament can be printed with the HT90 with the high-temperature print head.</div>
<p><strong>Recommended nozzle temperature:</strong> 380 - 440°C</p>
<p><strong>Recommended bed temperature:</strong> 135 - 150°C</p>
<table class="striped" style="width: 100.026%;">
<tbody>
<tr>
<th style="width: 49.463%;">
<p>Advantages</p>
</th>
<th style="width: 50.5109%;">
<p>Disadvantages</p>
</th>
</tr>
<tr>
<td style="width: 49.463%;">
<p>✔ Extraordinary temperature resistance</p>
</td>
<td style="width: 50.5109%;">
<p>✖ High cost of filament</p>
</td>
</tr>
<tr>
<td style="width: 49.463%;">
<p>✔ Excellent chemical and mechanical resistance</p>
</td>
<td style="width: 50.5109%;">
<p>✖ Requires adhesives to increase adhesion to the print bed</p>
</td>
</tr>
<tr>
<td style="width: 49.463%;">
<p>✔ High precision and dimensional stability</p>
</td>
<td style="width: 50.5109%;">
<p>✖ Removing supports can be difficult</p>
</td>
</tr>
<tr>
<td style="width: 49.463%;">
<p>✔ Low weight due to the presence of carbon fibers</p>
</td>
<td style="width: 50.5109%;">
<p>✖ Requires drying</p>
</td>
</tr>
<tr>
<td style="width: 49.463%;">✔ Self-extinguishing material</td>
<td style="width: 50.5109%;">
<p> </p>
</td>
</tr>
<tr>
<td style="width: 49.463%;">✔ Excellent insulating properties</td>
<td style="width: 50.5109%;">
<p> </p>
</td>
</tr>
</tbody>
</table>
<h3>Best use</h3>
<p>Lightweight and strong components in aerospace, engine parts and coolers in automotive, medical implants and tools, functional parts of machinery, valves, and pipes.</p>
<h3>Tips for successful printing</h3>
<p>It is essential to keep the filament dry, otherwise, its mechanical properties will significantly deteriorate. PEEK-CF is extremely hygroscopic and begins to absorb moisture from the air within 10 minutes, affecting the resulting quality and strength. Therefore, we recommend drying the filament for at least 4 hours at 130°C before printing and using a dry box (like the <a href="http://help.prusa3d.com/ja/article/prusa-pro-filament-drybox_725964">Prusa Pro Filament Drybox</a>). Printing this material requires an enclosed heated chamber with a minimum temperature of 85°C or higher.</p>
<h3>Heated chamber</h3>
<p>An actively heated chamber is necessary to print this material with a temperature of 85°C or higher. A heated chamber is essential for printing high-temperature materials in FFF, due to several reasons:</p>
<ul>
<li><strong>Prevents deformation: </strong>Maintains stable temperatures to reduce deformation and cracking.</li>
<li><strong>Improves layer adhesion:</strong> Supports stronger connections between layers.</li>
<li><strong>Preserves the properties of the material: </strong>Ensures proper crystallization and strength of the material.</li>
<li><strong>Prevents clogging:</strong> Prevents premature cooling of fibers and prevents problems with extrusion.</li>
<li><strong>Improves accuracy:</strong> Reduces thermal expansion and improves dimensional accuracy.</li>
</ul>
<h3>Print surface preparation</h3>
<p>For printing, a special adhesive must be applied to the print bed (e.g., MAGIGOO HT) for the perfect first layer. We recommend using the adhesive in multiple layers.</p>
<h3>Samples</h3>
<table style="border-collapse: collapse; width: 100%;" border="1">
<tbody>
<tr>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/27ff6d665768b405d242aba79e6884c9.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEKK-CF (Polyetherketoneketone)" alt="" width="1600" height="1200" loading="lazy" /></td>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/555f84b190145f235c3ca5d62d265e40.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEKK-CF (Polyetherketoneketone)" alt="" width="1597" height="1197" loading="lazy" /></td>
</tr>
<tr>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/35617225a4cecb30480338ff492bf1e1.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEKK-CF (Polyetherketoneketone)" alt="" width="1600" height="1200" loading="lazy" /></td>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/a41898ee6753df6cda3d709daee99687.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PEKK-CF (Polyetherketoneketone)" alt="" width="1600" height="1200" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p></p>


PEKK-CF (Polyetherketoneketone)

<p>You’ve probably guessed it already but the PEI 1010 isn’t exactly a “plug and print” material like our basic Prusaments (PLA, PETG…). Although we do our best to make our filaments as easy to print as possible, there are still certain physical limitations.</p>
<h3>Necessary hardware</h3>
<p>The melting point of this material is very high and so is the printing temperature, so <strong>you need an enclosed and actively heated 3D printer like the <a href="https://www.prusa3d.com/applications/prusa-pro-ht90_236004/">Prusa Pro HT90</a>.</strong></p>
<p>The moisture absorption is extremely fast and difficult to undo - <strong>you’ll need a <a href="https://www.prusa3d.com/product/memmert-uf30-filament-dryer/">professional dryer</a> (oven) and a <a href="https://www.prusa3d.com/product/prusa-pro-filament-drybox/">suitable dry box</a></strong>, or a dryer that can be connected directly to a printer. The spool placed outside without a dry box absorbs moisture in dozens of minutes. In a passive dry box (with silica gel only) the difference is noticeable after half a day or so and after several days the filament gets practically unprintable.</p>
<p>Finally, <strong>the print surface adhesion is also very high</strong> - here you’ll need a special separation layer like the <a href="https://www.prusa3d.com/product/magigoo-pro-ht-50ml/">MagiGoo HT</a>. To ensure good printability we designed and chose the following hardware that should work perfectly but you may use other equipment with similar properties too:</p>
<div class="tip-callout">
<ul>
<li><strong><a href="https://www.prusa3d.com/applications/prusa-pro-ht90_236004/">Prusa Pro HT90</a> with HT hot end</strong> - Printer capable of working at 410 °C for the nozzle, 150 °C for the heatbed, and at least 90 °C for the enclosure</li>
<li><strong><a href="https://www.prusa3d.com/product/memmert-uf30-filament-dryer/">Memmert UF30 Filament Dryer</a></strong> capable of holding stable temperature 150 °C for 6-8 hours</li>
<li><strong><a href="https://www.prusa3d.com/product/prusa-pro-filament-drybox/">Prusa Pro Filament Drybox</a></strong> capable of being connected to the 3D printer while printing</li>
<li><strong><a href="https://www.prusa3d.com/product/ht90-textured-powder-coated-steel-sheet/">HT90 Textured Powder-coated Steel Sheet</a> or <a href="https://www.prusa3d.com/product/ht90-pa-nylon-powder-coated-steel-sheet/">HT90 PA Nylon Powder-coated Steel Sheet</a></strong></li>
<li><strong><a href="https://www.prusa3d.com/product/magigoo-pro-ht-50ml/">MagiGoo HT</a></strong> - specialized high-temperature resistant separation layer applied on the print surface before printing (necessary for textured sheet only)</li>
</ul>
</div>
<h3>Step-by-step successful printing process</h3>
<p>Now, here’s a process you should do to print with Prusament PEI 1010 successfully:</p>
<ol>
<li><strong>Preheat the dryer</strong> (oven) to 150 °C and insert PEI 1010 spool. Dry the filament at 150 °C for 6-8 hours.</li>
<li><strong>Prepare the dry box:</strong> the desiccant inside should not be depleted (see the desiccant color). If it’s depleted, either dry it in the oven properly or replace it with fresh desiccant.</li>
<li><strong>After drying the filament, move it immediately to the dry box.</strong> This is crucial, as the PEI may absorb moisture after dozens of minutes!</li>
<li><strong>Prepare the HT90 printer.</strong> The printer should have an HT print head mounted - replace the printhead if the high-flow is mounted. Check the print sheet - PEI 1010 should be printed on the Textured powder-coated print sheet and PA Nylon print sheet only.</li>
<li>If you print in the Textured powder-coated print sheet, <strong>spread a thin even layer of the MagiGoo HT</strong> on the print surface. It is not necessary to apply the MagiGoo on the PA Nylon print sheet.</li>
<li><strong>Preheat the HT90</strong> (Nozzle: 410 °C, Heatbed: 150 °C, Chamber: 90 °C) and load the filament. Note that the filament should remain closed in the dry box. It should only be connected to the printer through the PTFE tube.</li>
<li><strong>Slice the model with the original PrusaSlicer profile.</strong> Other profiles may not work properly.</li>
<li><strong>Print it!</strong></li>
</ol>
<p><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/b582528dae278a2e7f943269983ee96a.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="How to print with PEI 1010" alt="" /></p>
<p><em>Only a thin layer of MagiGoo HT is necessary</em></p>
<p>If everything is done correctly, the print should have a nice glossy transparent amber look with no stringing and oozing.</p>
<p><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/b0f230f2a715d04c7bc0c312e9925a6b.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="How to print with PEI 1010" alt="" /></p>
<p><em>Example of a nice PEI 3D-printed part with no obvious errors.</em></p>
<h3>Choosing the right model</h3>
<p>Finally, you should know that the <strong>Prusament PEI 1010 tends to warp a lot during printing</strong>. This does not mean that you should print only the tiniest parts possible but it’s something you might want to consider when designing and slicing the models. We did our best to make the filament as easy to print as possible but still, working with such filaments requires some experience and knowledge. As for the latter, here are a few tips to make the best of it:</p>
<ul>
<li><strong>Consider the printed object size.</strong> The warping is most significant in the largest prints. This means that printing an object that has full-bed dimensions may not be the best choice. We recommend printing small to medium-sized parts for the best results.</li>
<li>Print bases with narrow angles, such as square shapes (or narrower ones) tend to warp much more than round ones. <strong>The best model is the one that has a flat circular base</strong> placed on the print surface. Don’t forget to consider it when designing and slicing a model.</li>
<li>No matter the size, <strong>we always recommend printing the PEI 1010 with a brim.</strong> This significantly reduces the warping issue.</li>
</ul>
<h3>Most common errors</h3>
<p>Finally, let's show some of the most common errors visible on the following 3D printed part:</p>
<p><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/09/49cecbaa6032be18236907097bc2b9f2.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="How to print with PEI 1010" alt="" width="2506" height="1880" loading="lazy" /></p>
<ol>
<li><strong>The filament is not dry</strong> - this is mostly noticeable at the bottom part, where the extruded material has a "foamy" structure, the model loses its desired dimensional properties and mechanical resistance too.</li>
<li><strong>This model was printed with other than the recommended PrusaSlicer profile.</strong> This is why the model is full of cavities (bubbles) noticeable in every layer, which significantly affect the model's mechanical properties.</li>
<li><strong>This model was also full of strings</strong> (not visible in the photo above) due to the errors mentioned above.</li>
<li><strong>Notice the warping:</strong> the model peeled off the print sheet even with the brim. This was caused by three reasons. First, the model is not exactly round and compact. The shape is not ideal but a larger brim might help. Second, the wet filament tends to warp more and stick less to the print surface than the dry one. Finally, we applied too much MagiGoo HT on the surface.</li>
</ol>
<p></p>


How to print with PEI 1010

<p>The <strong>Prusa Pro HT90</strong> is operated through a touch screen. The screen is used to operate the printer, and it will show you images of the processes to be done on the printer.</p>
<p><img decoding="async" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/08/e8e63c2614dd4b509da33e61e67aad11.png" sizes="(min-width: 1024px) 820px, 100vw" srcset="LCD menu (HT90)" alt="" width="300" height="499" loading="lazy" /></p>
<h3>Menu when idle</h3>
<ul>
<li>Home</li>
<li>Print</li>
<li>More
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>Move</li>
<li>Extrude</li>
<li>Temperature
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: disc;">
<li>Extruder</li>
<li>Heater bed</li>
<li>Heater chamber</li>
<li>PLA</li>
<li>PETG</li>
<li>ABS</li>
<li>ASA</li>
<li>PA</li>
<li>PA-CF</li>
<li>PC</li>
<li>PC-CF</li>
<li>PEEK</li>
<li>PEI 1010</li>
<li>PEI 9085</li>
<li>PSU</li>
<li>PPS</li>
<li>PPSU</li>
<li>PES</li>
</ul>
</li>
</ul>
</li>
<li>Nozzle change</li>
<li>Service position</li>
<li>System</li>
<li>Settings
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: square;">
<li>Printer Name</li>
<li>Door Sensor [On/Off]</li>
<li>Filament Sensor [On/Off]</li>
<li>Estimated Time Method [Auto (default)/File/Filament Used/Slicer]</li>
<li>Screen Power Off time [1 minute/2 minutes/5 minutes/15 minutes/30 minutes/1 hour/2 hours/4 hours]</li>
<li>Prusa Connect</li>
<li>Security</li>
<li>Privacy
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: disc;">
<li>System info Minimal [On/Off]</li>
<li>System Info Full [On/Off]</li>
<li>Statistics Print Basic [On/Off]</li>
<li>Statistics Print Extended [On/Off]</li>
<li>Statistics Region [On/Off]</li>
<li>Diagnostics [On/Off]</li>
</ul>
</li>
</ul>
</li>
<li>Time Zone
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: disc;">
<li>Africa</li>
<li>America</li>
<li>Antarctica</li>
<li>Asia</li>
<li>Atlantic</li>
<li>Australia</li>
<li>Europe</li>
<li>Pacific</li>
</ul>
</li>
</ul>
</li>
<li>Import Config</li>
<li>Backup Config</li>
<li>Factory Reset</li>
</ul>
</li>
</ul>
</li>
<li>Network</li>
<li>Slicer profiles</li>
</ul>
</li>
</ul>
</li>
<li>Light</li>
<li>Load
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>PLA</li>
<li>PETG</li>
<li>ABS</li>
<li>ASA</li>
<li>PA</li>
<li>PA-CF</li>
<li>PC</li>
<li>PC-CF</li>
<li>Flex</li>
</ul>
</li>
</ul>
</li>
<li>Unload</li>
</ul>
<h3>Menu when printing</h3>
<ul>
<li>Pause</li>
<li>Cancel</li>
<li>Tuning
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>Z-/Z+</li>
<li>Speed-/Speed+</li>
<li>Extrusion-/Extrusion+</li>
<li>Hotend-/Hotend+</li>
<li>Bed-/Bed+</li>
<li>Chamber-/Chamber+</li>
</ul>
</li>
</ul>
</li>
<li>Settings</li>
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: circle;">
<li>Printer Name</li>
<li>Door Sensor [On/Off]</li>
<li>Filament Sensor [On/Off]</li>
<li>Estimated Time Method [Auto (default)/File/Filament Used/Slicer]</li>
<li>Screen Power Off time [1 minute/2 minutes/5 minutes/15 minutes/30 minutes/1 hour/2 hours/4 hours]</li>
<li>Prusa Connect</li>
<li>Security</li>
<li>Privacy
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: square;">
<li>System info Minimal [On/Off]</li>
<li>System Info Full [On/Off]</li>
<li>Statistics Print Basic [On/Off]</li>
<li>Statistics Print Extended [On/Off]</li>
<li>Statistics Region [On/Off]</li>
<li>Diagnostics [On/Off]</li>
</ul>
</li>
</ul>
</li>
<li>Time Zone
<ul>
<li style="list-style-type: none;">
<ul style="list-style-type: disc;">
<li>Africa</li>
<li>America</li>
<li>Antarctica</li>
<li>Asia</li>
<li>Atlantic</li>
<li>Australia</li>
<li>Europe</li>
<li>Pacific</li>
</ul>
</li>
</ul>
</li>
<li>Import Config</li>
<li>Backup Config</li>
<li>Factory Reset</li>
</ul>
</li>
</ul>
</ul>
<p></p>


LCD menu (HT90)

<p>Prusa Discount Codes, Promo Codes, Voucher Codes, and similar terms might show up in your search engine results. Exercise caution when visiting websites promising these discounts. These websites are usually full of pop-up and pop-under windows with ads and the codes do not work.</p>
<p>Be careful with discount codes, vouchers, and coupons promising any percentage discount on our products, as they are always fake.</p>
<h3>Affiliate Links</h3>
<p>We provide our partners with <strong><a href="https://partner.prusa3d.com/affiliates/">affiliate links</a></strong>, which are not discount codes. If you click an affiliate link and purchase the product from our e-shop, our partners receive a specific provision from this transaction. Suppose you are offered a discount that requires you to click an affiliate link. In that case, it's misleading behavior - you will pay the full price for the item and the affiliate partner will receive a financial provision.</p>
<p>If you have a voucher from an affiliate link, this voucher cannot be combined with other vouchers, and the validity cannot be extended beyond the original expiration date.</p>
<h3>Discounts</h3>
<p>If you wish to buy discounted products from us, you have the following options:</p>
<h4>Printer discounts</h4>
<p>If you make an order for the <strong>assembled MK4S printers</strong> we offer a 10% discount on subsequent orders of another <strong>five units</strong> of the assembled MK4S printer. The discount is bound to the customer account that purchased the printer. It is not provided in the form of a discount code. After the order including at least one eligible printer is delivered to you, your Prusa account automatically applies the discount. If the initial order has more than one <strong>assembled MK4S printer </strong>the discount will still be for five printers.</p>
<div class="warning-callout">This offer is only valid <strong>once</strong>. After the five printers with discounts are purchased, no more discounts will be granted for additional printers.</div>
<h4>Filament discounts</h4>
<p>When you buy the MK4 kit, you'll receive a 5% discount on subsequent orders of selected filaments. When you buy an assembled MK4S 3D printer, you'll receive a 10% discount on subsequent orders of selected filaments. These discounts are bound to your customer account and they are limited to <strong>30 spools of filament per year</strong>. Also, these discounts are not provided as discount codes. After the printer is delivered to you, your Prusa account automatically applies the discount.</p>
<h4>Special deals</h4>
<p>Special deals may appear on our e-shop - e.g., Black Friday deals or special pre-purchase offers. These deals are available only on our e-shop and we usually inform about them on our blog or social media, where we also describe whether any conditions apply.</p>
<p>Misleading or fake voucher code websites may offer the following: Prusa voucher codes, Prusa discount codes, Prusa promo codes, Enjoy 50% Off Prusa3D, Prusa3D voucher codes, Prusa3D discount codes, Prusa3D Promo Codes, Prusa3D Coupons for January, February, March, April, May, June, July, August, September, October, November, December 2020, 2021, 2022, 2023</p>
<h4>Event vouchers</h4>
<p>You can meet our team at some <a href="https://www.printables.com/event/discover?attendedByPrusaResearch=true">events</a> around the world. In some of these events, you can get a voucher for a discount on some printers and some filaments. This voucher cannot be combined with other vouchers, and the validity cannot be extended beyond the original expiration date.</p>
<h4>Printables vouchers</h4>
<p>In the <a href="https://www.printables.com/">Printables.com</a> website, you can collect <a href="http://help.prusa3d.com/ja/article/how-do-prusameters-on-printables-work_365065">Prusameters</a> for various actions and achievements. The voucher is sent up to two weeks after they are requested. When the voucher is approved, you will receive a notification in Printables and your email address. The voucher code can also be found in your account history. If a voucher has been sent, it is not possible to change it back into Prusameters. This voucher cannot be merged with other vouchers. If the selected product is out of stock, the voucher can be extended by contacting our <a href="http://help.prusa3d.com/ja/article/customer-support_2287">support team</a>.</p>
<h4>Refund vouchers</h4>
<p>When requesting a refund for an order in the Prusa e-shop, you can choose to have the amount refunded to your payment method or have it refunded as a voucher. This voucher can be combined with other vouchers and its validity can be extended by contacting our <a href="http://help.prusa3d.com/ja/article/customer-support_2287">support team</a>.</p>
<h3>Voucher conditions</h3>
<ul>
<li><strong>Partial redemption</strong>: Partial redemption is possible for vouchers with a nominal value. When a voucher is partially redeemed, a new voucher will be issued for the remaining balance, provided the remaining amount is greater than $1 (or equivalent in other currencies). Once the remaining balance is below this threshold, no further vouchers will be issued.</li>
<li><strong>Exclusions</strong>: Some vouchers are limited to specific products or services and may only provide a nominal discount or a percentage-based discount. In such cases, the customer is responsible for any additional costs, including but not limited to <strong>shipping charges</strong> and <strong>customs/import duties</strong>.</li>
<li><strong>Lost or stolen vouchers</strong>: The company is <strong>not responsible</strong> for lost, stolen, or misplaced vouchers. Once issued, vouchers are the responsibility of the recipient. It is advised to treat vouchers like cash and store them securely.</li>
<li><strong>Returns and Refunds</strong>: If an item purchased using a voucher is returned, refunds will be issued in the form of another voucher. In <strong>exceptional cases</strong> and with proper approval, it may be possible to cancel the original and subsidiary vouchers and change the refund method to a cash refund. All original voucher terms will still apply to the refunded amount.</li>
<li><strong>Fraud Prevention</strong>: Any attempt to use a voucher in a fraudulent manner, including duplicating or altering the voucher, will result in the voucher being voided. The company reserves the right to take further action in such cases, including the cancellation of orders and legal proceedings.</li>
</ul>
<p></p>


Vouchers/Discounts

<p>PPSU (polyphenylsulfone) is a technical thermoplastic material with excellent resistance to heat and chemicals and superior hydrolytic stability. The main characteristic of this material is the <strong>resistance to impact</strong>. It has a higher ductility and can withstand repeated sterilization cycles, making it more durable in applications involving mechanical stress.</p>
<p>It is ideal for applications requiring extreme stability and durability. Its properties include <strong>high mechanical strength, toughness, and wear resistance</strong>. With a temperature range from -100°C to over 200°C, PPSU is suitable for applications with extreme temperature resistance.</p>
<div class="tip-callout">This filament can be printed with the HT90 with the high-temperature print head.</div>
<p><strong>Recommended nozzle temperature:</strong> 370 - 410 ºC</p>
<p><strong>Recommended bed temperature:</strong> 140 - 155°C</p>
<table class="striped" style="width: 100.026%; height: 430.4px;">
<tbody>
<tr style="height: 50.8px;">
<th style="width: 49.5959%; height: 50.8px;">
<p>Pros</p>
</th>
<th style="width: 50.3797%; height: 50.8px;">
<p>Cons</p>
</th>
</tr>
<tr style="height: 51.6px;">
<td style="width: 49.5959%; height: 51.6px;">
<p>✔ Excellent temperature resistance<br />(better than Ultem)</p>
</td>
<td style="width: 50.3797%; height: 51.6px;">
<p>✖ Higher cost</p>
</td>
</tr>
<tr style="height: 72.4px;">
<td style="width: 49.5959%; height: 72.4px;">
<p>✔ Good chemical resistance</p>
</td>
<td style="width: 50.3797%; height: 72.4px;">
<p>✖ Prone to warping</p>
</td>
</tr>
<tr style="height: 51.6px;">
<td style="width: 49.5959%; height: 51.6px;">
<p>✔ Resistance to radiation</p>
</td>
<td style="width: 50.3797%; height: 51.6px;">
<p>✖ Requires drying</p>
</td>
</tr>
<tr style="height: 51.6px;">
<td style="width: 49.5959%; height: 51.6px;">
<p>✔ Possibility of sterilization</p>
</td>
<td style="width: 50.3797%; height: 51.6px;">
<p>✖ Requires adhesives to increase adhesion to the<br />print bed</p>
</td>
</tr>
<tr style="height: 50.8px;">
<td style="width: 49.5959%; height: 50.8px;">✔ Self-extinguishing material</td>
<td style="width: 50.3797%; height: 50.8px;">
<p>✖ Removing supports can be difficult</p>
</td>
</tr>
<tr style="height: 50.8px;">
<td style="width: 49.5959%; height: 50.8px;">✔ Dimensional stability during printing</td>
<td style="width: 50.3797%; height: 50.8px;">
<p> </p>
</td>
</tr>
</tbody>
</table>
<h3>Best use</h3>
<p>Sterilized and chemically resistant components in medicine - casings, surgical instruments, pipes, valves. Additionally, connectors, relays, and aerospace components.</p>
<h3>Tips for successful printing</h3>
<p>It is essential to keep the filament dry, otherwise, its mechanical properties will significantly deteriorate. Despite the low moisture absorption, we recommend drying the filament for at least four hours at 110°C before printing and then using a dry box. Printing this material requires an enclosed and heated chamber with a minimum temperature of 65°C.</p>
<h3>Heated chamber</h3>
<p>An actively heated chamber is necessary to print this material with a temperature of 65°C or higher. A heated chamber is essential for printing high-temperature materials in FFF, due to several reasons:</p>
<ul>
<li><strong>Prevents deformation: </strong>Maintains stable temperatures to reduce deformation and cracking.</li>
<li><strong>Improves layer adhesion:</strong> Supports stronger connections between layers.</li>
<li><strong>Preserves the properties of the material: </strong>Ensures proper crystallization and strength of the material.</li>
<li><strong>Prevents clogging:</strong> Prevents premature cooling of fibers and prevents problems with extrusion.</li>
<li><strong>Improves accuracy:</strong> Reduces thermal expansion and improves dimensional accuracy.</li>
</ul>
<h3>Print surface preparation</h3>
<p>For printing, a special adhesive must be applied to the print bed (e.g., MAGIGOO HT) for the perfect first layer. We recommend using the adhesive in multiple layers.</p>
<h3>Samples</h3>
<table style="border-collapse: collapse; width: 100%;" border="1">
<tbody>
<tr>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/fc40f08ae1ca058ab3150b1a10997951.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPSU (Polyphenylsulfone)" alt="" width="1600" height="1200" loading="lazy" /></td>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/04c6e89cb196e76bc3fd54a23d8c1b10.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPSU (Polyphenylsulfone)" alt="" width="1600" height="1200" loading="lazy" /></td>
</tr>
<tr>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/b7caebbce48a4e674c1770ce82cb6adb.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPSU (Polyphenylsulfone)" alt="" width="1636" height="1227" loading="lazy" /></td>
<td style="width: 48.835784%;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/5ce729282e675553d84e8c10b818d274.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPSU (Polyphenylsulfone)" alt="" width="1600" height="1200" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p></p>


PPSU (Polyphenylsulfone)

<p>The <strong>Prusa Pro HT90 </strong>features many elements, including among others an actively heated chamber, a high-performance heatbed, and a choice of high-flow or high-temperature hotend. </p>
<p>The exact amount of power consumption from the printer depends on the specific type of material, but in general, the following <strong>peak power consumption</strong> specifications apply: </p>
<ul>
<li>Voltage 230 V, peak power 1900 W </li>
<li>Voltage 110 V, peak power 1800 W </li>
</ul>
<p>Please note that the printer does not have a switching system for the supported AC voltages. The printer supports one AC voltage, depending on the chosen version. </p>
<p>The printer does not have a power recovery feature, such as power panic. In many cases, on most materials printed with HT90, a power panic feature would not be useful, as the cooling of the chamber would already result in a print failure. </p>
<p>A temporary power outage can be solved using an external, third-party <strong>UPS</strong> (Uninterruptible Power Supply). Though this is fully optional, it can prove useful for temporary power outages, <strong>preventing a print fail</strong> in that situation. </p>
<p></p>


HT90 - Power Consumption

<p>PPS or Polyphenylene sulfide is a semi-crystalline technical thermoplastic material suitable for 3D printing characterized by high resistance to heat and chemicals. The main characteristic of this material is the <strong>chemical resistance</strong>, particularly to acids, alkalis, and solvents. It is highly resistant to organic solvents and does not dissolve in any known solvent below 200°C.</p>
<p>With thermal stability from -100°C to over 200°C, PPS is an ideal choice for <strong>applications requiring resistance in extreme temperatures.</strong> This material has excellent mechanical properties, including high toughness, strength, and wear resistance, however, it can be more brittle than materials like <strong>PSU</strong> and <strong>PPSU</strong>. Its outstanding electrical characteristics, such as high dielectric strength and low dissipation factor, further increase its attractiveness for electrical and electronic applications.</p>
<div class="tip-callout">This filament can be printed with the HT90 with the high-temperature print head.</div>
<p><strong>Recommended nozzle temperature:</strong> 330 - 370°C</p>
<p><strong>Recommended bed temperature:</strong> 120 - 150°C</p>
<table class="striped" style="width: 100.026%; height: 430.4px;">
<tbody>
<tr style="height: 50.8px;">
<th style="width: 49.5959%; height: 50.8px;">
<p>Pros</p>
</th>
<th style="width: 50.3797%; height: 50.8px;">
<p>Cons</p>
</th>
</tr>
<tr style="height: 51.6px;">
<td style="width: 49.5959%; height: 51.6px;">
<p>✔ High-temperature resistance</p>
</td>
<td style="width: 50.3797%; height: 51.6px;">
<p>✖ Higher cost</p>
</td>
</tr>
<tr style="height: 72.4px;">
<td style="width: 49.5959%; height: 72.4px;">
<p>✔ Exceptional chemical resistance - <br />not soluble in any solvent below 200°C</p>
</td>
<td style="width: 50.3797%; height: 72.4px;">
<p>✖ Prone to warping</p>
</td>
</tr>
<tr style="height: 51.6px;">
<td style="width: 49.5959%; height: 51.6px;">
<p>✔ Resistance to radiation</p>
</td>
<td style="width: 50.3797%; height: 51.6px;">
<p>✖ Requires drying</p>
</td>
</tr>
<tr style="height: 51.6px;">
<td style="width: 49.5959%; height: 51.6px;">
<p>✔ Suitable insulating material</p>
</td>
<td style="width: 50.3797%; height: 51.6px;">
<p>✖ Requires adhesives to increase adhesion to the<br />print bed</p>
</td>
</tr>
<tr style="height: 50.8px;">
<td style="width: 49.5959%; height: 50.8px;">✔ Self-extinguishing material</td>
<td style="width: 50.3797%; height: 50.8px;">
<p>✖ Removing supports can be difficult</p>
</td>
</tr>
<tr style="height: 50.8px;">
<td style="width: 49.5959%; height: 50.8px;">✔ Dimensional stability during printing</td>
<td style="width: 50.3797%; height: 50.8px;">
<p> </p>
</td>
</tr>
<tr style="height: 50.8px;">
<td style="width: 49.5959%; height: 50.8px;">✔ Low moisture absorption</td>
<td style="width: 50.3797%; height: 50.8px;">
<p> </p>
</td>
</tr>
</tbody>
</table>
<h3>Tips for successful printing</h3>
<p>It is essential to keep the filament dry, otherwise, its mechanical properties will significantly deteriorate. Despite the low moisture absorption, we recommend drying the filament for at least 4 hours at 110°C before printing and then using a dry box. Printing this material requires an enclosed and heated chamber with a minimum temperature of 65°C.</p>
<h3>Heated chamber</h3>
<p>An actively heated chamber is necessary to print this material with a temperature of 65°C or higher. A heated chamber is essential for printing high-temperature materials in FFF, due to several reasons:</p>
<ul>
<li><strong>Prevents deformation: </strong>Maintains stable temperatures to reduce deformation and cracking.</li>
<li><strong>Improves layer adhesion:</strong> Supports stronger connections between layers.</li>
<li><strong>Preserves the properties of the material: </strong>Ensures proper crystallization and strength of the material.</li>
<li><strong>Prevents clogging:</strong> Prevents premature cooling of fibers and prevents problems with extrusion.</li>
<li><strong>Improves accuracy:</strong> Reduces thermal expansion and improves dimensional accuracy.</li>
</ul>
<h3>Print surface preparation</h3>
<p>For printing, a special adhesive must be applied to the print bed (e.g., MAGIGOO HT) for the perfect first layer. We recommend using the adhesive in multiple layers.</p>
<h3>Samples</h3>
<table style="border-collapse: collapse; width: 100%; height: 322px;" border="1">
<tbody>
<tr style="height: 304px;">
<td style="width: 48.835784%; height: 304px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/f0698248372416689febe57cd0d7c0b9.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPS (Polyphenylene sulfide)" alt="" width="1600" height="1200" loading="lazy" /></td>
<td style="width: 48.835784%; height: 304px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/6579b5fc6f5025ac869d3f2cf6f62a2f.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPS (Polyphenylene sulfide)" alt="" width="1600" height="1200" loading="lazy" /></td>
</tr>
<tr style="height: 18px;">
<td style="width: 48.835784%; height: 18px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/4fd93fb0191ef3bdd9ec4789667e3a83.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPS (Polyphenylene sulfide)" alt="" width="1600" height="1200" loading="lazy" /></td>
<td style="width: 48.835784%; height: 18px;"><img decoding="async" src="https://cdn.help.prusa3d.com/wp-content/uploads/2024/11/75b90dda73d58780f94da58be787ce4e.jpg" sizes="(min-width: 1024px) 820px, 100vw" srcset="PPS (Polyphenylene sulfide)" alt="" width="1600" height="1200" loading="lazy" /></td>
</tr>
</tbody>
</table>
<p></p>


PPS (Polyphenylene sulfide)


<ul>
<li>Improved menu bar, the menu no longer hides under a button</li>



<li>Two new parameters (Abrasive material and High flow nozzle) for G-Code checks</li>



<li>Improved automatic orientation of bridges</li>



<li>Number of bugfixes</li>
</ul>


2.8.1


<ul>
<li>Download slicer profiles directly from printer</li>



<li>Hot surfaces warning on door open</li>



<li>Display status on temperature waiting</li>



<li>Nozzle and filament validation for web interface</li>



<li>Added support for standard brass nozzle 0.25mm</li>



<li>Added serial number display to settings</li>
</ul>


1.1.0


<ul>
<li>Prusa Connect integration</li>



<li>Prusa Account integration</li>



<li>Improved UI</li>



<li>Improved G-code Viewer</li>



<li>New system profile updating system</li>



<li>Single Perimeter for top and bottom layers</li>



<li>Extended SLA layer separation configuration</li>



<li>Bug fixes</li>
</ul>


Prusa Pro HT90

Downloads

Firmware 1.1.0

Drivers & Apps 2.8.1

Handbook 1.00

How to

Assembly Instructions

Service Manuals

Unpacking the printer (HT90)

How to install the Camera dummy module (HT90)

How to replace the door (HT90)

Categories

あなたのプリンターについて (7)

このプリンターを使用 (16)

Troubleshooting [進行中の翻訳] (1)

PrusaSlicer (1)

Articles