EN
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

HT90 - Power Consumption

Relevant for:
Last updated a month ago
This article is also available in following languages: 
PLDEITFR

The Prusa Pro HT90 features many elements, including among others an actively heated chamber, a high-performance heatbed, and a choice of high-flow or high-temperature hotend. 

The exact amount of power consumption from the printer depends on the specific type of material, but in general, the following peak power consumption specifications apply: 

  • Voltage 230 V, peak power 1900 W 
  • Voltage 110 V, peak power 1800 W 

Please note that the printer does not have a switching system for the supported AC voltages. The printer supports one AC voltage, depending on the chosen version. 

The printer does not have a power recovery feature, such as power panic. In many cases, on most materials printed with HT90, a power panic feature would not be useful, as the cooling of the chamber would already result in a print failure. 

A temporary power outage can be solved using an external, third-party UPS (Uninterruptible Power Supply). Though this is fully optional, it can prove useful for temporary power outages, preventing a print fail in that situation. 

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us