• Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français

UV LED calibrator error #10314 (SL1)

Relevant for:
Last updated 3 years ago
This article is also available in following languages: 

What happened?

The printer is displaying the message: The UV LED calibrator detected some light on a dark display. This means there is a light 'leak' under the UV calibrator, or your display does not block the UV light enough. Please check the UV calibrator placement on the screen or replace the exposure display.

Error name: UV LED calibrator error 

Error code: #10314 

How to fix it?

It must be connected to the front USB port when instructed or before the calibration has started. Also, the lid should be closed to prevent any light leak from the outside.

If the calibrator is placed correctly, the print display, which is a consumable and will degrade over time, has burned out areas that will not block or let light through. It is rated for 500 hours of printing. In this case, the print display must be replaced.


How to replace print display (SL1)

Was this article helpful?


Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us