English
Login

The G-code isn't fully compatible

#31803 (CORE One) #26803 (MK4S) #27803 (MK3.9S) #28803 (MK3.5S) #13803 (MK4) #21803 (MK3.9) #23803 (MK3.5) #17803 (XL) #12803 (MINI)

Relevant for

CORE One
MK4 family
XL family
MK3.9 family
MK3.5 family
+
24 comments
Article is also available in following languages
English
Čeština
Polski
Deutsch
Français
Español
Italiano
日本語

What happened? 

The printer can detect if a loaded G-code is not compatible with the current printer setup, thanks to a set of saved hardware settings. In this scenario, the printer shows the message "The G-code isn't fully compatible".

Error name: The G-code isn't fully compatible

Error code: #31803 (CORE One) #35803 (CORE One L) #26803 (MK4S) #27803 (MK3.9S) #28803 (MK3.5S) #13803 (MK4) #21803 (MK3.9) #23803 (MK3.5) #17803 (XL) #12803 (MINI)

How to fix it? 

Ensure full compatibility between the G-code and the printer. In particular, double-check both the G-code and the printer hardware settings in LCD Menu -> Settings -> Hardware, for differences in the printer model, the parameters of the installed nozzle, and other hardware settings. 

Was this article helpful?
This action is available only to registered users. Please log-in.
 

20 comments

Log in  to post a comment
maxfagin
•
Same issue with a CoreOne running 6.4.0+11974 firmware. Extremely frustrating as it means my part ejection and resetting routines are useless, since every part requires me to clear the error before starting the next part. Any word on what is causing it or how to fix it?
Reply
Rick Wantz
•
My MK4 is also indicating a "The G-code isn't fully complete. G code not sliced for input shapter". Am able to print anyway. This started happening once I upgraded to Firmware 6.4.0. Seeking remedy. Any Suggestions?

How would I downgrade to prior Firmware version?
Reply
Colin Leonard
•
Hi- After upgrading to Firmware 6.4.0 I am also getting the same message. This was after the hardware upgrade for my CORE-ONE to CORE-ONE+ ..Not being able to find a solution to the problem so I have now downgraded to the previous version.
Any ideas?
Reply
William D
•
Hi - Any update to this as yet ? As you'll guess many people are getting the same error- all started when we updated to Firmware 6.4.0 ? Sounds like an urgent bug fix is required ?
Reply
JohnR6464
•
I have checked all the suggested printer hardware settings. I am missing the incompatible setting that triggered the error code...
Any suggestions as to why i'm getting this error?
When I get the error, I print anyway and it seems to work (although it is slow)

My setup:

MK4
6.4.0+119747
MK4_MK4S_MK3.9_MK3.9S_firmware_6.4.0.bbf

Thanks
John Ryan
Reply