What happened?
The printer can detect if a loaded G-code is not compatible with the current printer setup, thanks to a set of saved hardware settings. In this scenario, the printer shows the message "The G-code isn't fully compatible".
Error name: The G-code isn't fully compatible
Error code: #31803 (CORE One) #35803 (CORE One L) #26803 (MK4S) #27803 (MK3.9S) #28803 (MK3.5S) #13803 (MK4) #21803 (MK3.9) #23803 (MK3.5) #17803 (XL) #12803 (MINI)
How to fix it?
Ensure full compatibility between the G-code and the printer. In particular, double-check both the G-code and the printer hardware settings in LCD Menu -> Settings -> Hardware, for differences in the printer model, the parameters of the installed nozzle, and other hardware settings.
Was this article helpful?
This action is available only to registered users. Please log-in.
21 comments
To fix the problem, when using the Prusa Slicer, with an up to date version of the Slicer, go to the printers tab and printers are available, for me they are;
Original Prusa MK4 0.4 nozzle
Original Prusa MK4 Input Shaper 0.4 nozzle
Select the Input Shaper version and this should correct the issue.
Note: The only difference I can find are in the Printer tab Notes section.
PRINTER_VENDOR_PRUSA3D
PRINTER_MODEL_MK4
has been replaced with
PRINTER_MODEL_MK4IS
How would I downgrade to prior Firmware version?
Any ideas?