• Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語

Factory reset (MINI)

Relevant for:
Last updated 3 years ago
This article is also available in following languages: 

Stored separately from the firmware itself, in the mainboard's EEPROM, you have statistics of your printer, calibration data related to the movement of the printer, and PID values for heating. If these values become corrupted or are not compatible with a new version of the firmware, you can have some issues. If so, we recommend doing a factory reset to clear these values.

Doing a factory reset will clear statistics data, like total printing time and filament use.

How to

On the Original Prusa MINI the Factory reset can be performed from the LCD menu -> Settings -> Factory reset.

Flashing the firmware

If you are seeing any inconsistent behavior we recommend also flashing the firmware. A factory reset followed by flashing the firmware and recalibrating will resolve most firmware issues you may encounter. 

Was this article helpful?


Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us