- English
- Čeština
- Italiano
- Deutsch
- Polski
- Français
- Home
- このプリンターを使用
- プリンターメンテナンス
- Changing or replacing the Prusa Nozzle
Changing or replacing the Prusa Nozzle
- 3Dモデル
- 材料ガイド
- スライス処理
- プリンターメンテナンス
- ベルトの調整方法 (MINI/MINI+)
- ベルト張力の調整 (MK4/S, MK3.9/S, MK3.5/S, MK3/S/+)
- ベルトの調整方法 (XL)
- Buddyボードの電気配線(MINI)
- Changing or replacing the Nextruder Hotend
- ノズルの変更・交換 (MK2.5/S, MK3/S/+, MK3.5/S)
- Changing or replacing the Prusa Nozzle
- Do I have the Prusa Nozzle?
- Methods for replacing the Prusa Nozzle
- Changing the print head
- ノズルの交換／取り替え（MINI）
- Bondtechギアのチェックとアラインメント調整 (MK3.5/S, MK3S/+, MK2.5S)
- コールドプルテクニック(MINI)
- コールドプル (MK3/S/+, MK2.5/S, MK3.5/S)
- コールドプル (MK4/S, MK3.9/S, XL) #13702 #17702
- Community translations
- CW1 maintenance
- FEP film replacement (SL1)
- Fire Suppression system (Enclosure)
- Firmware updating (CW1)
- ファームウェアのアップデート方法 (MINI/MINI+)
- Firmware updating (MK2.5S/MK2S)
- Firmware updating (MMU2S)
- Firmware updating (SL1/SL1S)
- HEPA filter replacement (HT90)
- ホットエンドの分解＆ヒートシンクのヒートブレイクがスタック
- ファームウェアのダウングレード (MK4/S, MK3.9/S, MK3.5/S, XL)
- 頭が潰れてしまったネジの外し方
- How to update firmware (HT90)
- ファームウェアのアップデート方法 (MK3S+/MK3S/MK3)
- ファームウェア更新方法 (MK4/S, MK3.9/S, MK3.5/S, XL)
- How to update firmware (MMU3)
- i3プリンターの定期的なメンテナンス
- IPA pigment filter (CW1/CW1S)
- MMU2S regular maintenance
- MMU3の定期メンテナンス
- Nozzle replacement (HT90)
- PETG sheets (Enclosure)
- Print surface preparation
- Printing without purge tower on the XL (Multi-Tool)
- 定期的なメンテナンス (MINI)
- Regular printer maintenance (HT90)
- Regular printer maintenance (MK3.5/S)
- プリンタの定期メンテナンス (MK4/S, MK3.9/S)
- 定期的なメンテナンス (XL)
- エクストルーダーからの手動によるフィラメントの取り出し
- SDカード・USBメモリ
- SL1/SL1S maintenance
- SL1/SL1S print removing
- 安全機能のテスト（MK3/MK3S）
- プリント中の振動とノイズ (MINI/MINI+)
- Prusa Connect [進行中の翻訳]
Replacing the Prusa Nozzle on your printer varies depending on the model of your printer. This article provides an overview of the different methods to replace the Prusa Nozzle, directing you to the appropriate guides for your specific printer model.
Do I have the Prusa Nozzle?
Every MK4S, MK3.9S, MK4, MK3.9 and XL that is shipped from our company comes with the Prusa Nozzle installed or included in the kit.
Methods for replacing the Prusa Nozzle
There are two different ways to replace the nozzle for each model. We have designed the Nozzle Replacement Tool that makes the process easier and quicker, but it requires printing the tool first.
MK4S/MK3.9S
- How to replace the Prusa Nozzle (MK4S/MK3.9S)
- How to replace the Prusa Nozzle (MK4S/MK3.9S) using the MK4S Nozzle Replacement Tool (instructions in the description on Printables.com)
MK4/MK3.9
- How to replace the Prusa Nozzle (MK4/MK3.9)
- How to replace the Prusa Nozzle (MK4/MK3.9) using the MK4 Nozzle Replacement Tool (instructions in the description on Printables.com)
XL Single-tool
- How to replace the Prusa Nozzle (XL single-tool)
- How to replace the Prusa Nozzle (XL single-tool) using the XL Nozzle Replacement Tool (instructions in the description on Printables.com)
XL Multi-tool
- How to replace the Prusa Nozzle (XL multi-tool)
- How to replace the Prusa Nozzle (XL multi-tool) using the XL Nozzle Replacement Tool (instructions in the description on Printables.com)
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.