English
Login

SuperPINDA

PINDA stands for Prusa INDuction Autoleveling probe, which is a vital component facilitating automatic calibration. It is an inductive probe compatible with our FFF printers. Unlike the P.I.N.D.A. V2, the SuperPINDA does not have a thermistor, but due to its high-quality components, a thermistor is not necessary. It can be used across most of our models

Related articles

Failing Z calibration (MK3S/MK2.5S)

Failing Z calibration (MK3S/MK2.5S)

The size of the extruder and the length of travel of the Z-axis is coded into the firmware. Therefore, if the assembly of the extruder, or the firmware for your extruder, is not…

How to replace a heatbreak/heaterblock/heatsink (MK3/MK2.5)

How to replace a heatbreak/heaterblock/heatsink (MK3/MK2.5)

Err: PRINT FAN ERROR

Err: PRINT FAN ERROR

PRINT FAN ERROR error message occurs when the print fan (the one at the front of the extruder) does not receive any RPM (Revolutions per Minute) readings. This can be caused by…

XYZ Calibration (MK2.5/MK2.5S)

XYZ Calibration (MK2.5/MK2.5S)

The XYZ calibration is a process, which checks, whether the printer was assembled correctly and the axes are perpendicular to each other. It measures the skew of your X/Y axis…

M.I.N.D.A./SuperPINDA sensor testing (MINI/MINI+)

M.I.N.D.A./SuperPINDA sensor testing (MINI/MINI+)

The Induction auto-leveling sensor is a vital component facilitating the calibration of the MINI and MINI+. It acts like the Z end-stop and is the main component in mesh-bed leveling.…