Upgrady tiskáren Prusa

Tento článek je také dostupný v následujících jazycích: 

Tiskárny Original Prusa nabízejí řadu možností upgradů, abyste mohli svůj stroj udržovat v aktuálním stavu s nejnovějšími funkcemi. Tento článek obsahuje přehled dostupných upgradů pro různé modely, včetně tiskáren řady MK, MMU, XL a modelů SL1/S. Prozkoumejte možnosti upgradu jednotlivých produktů a zjistěte, jak vylepšit svou tiskárnu.

Řada MK

Řada tiskáren Original Prusa MK lze upgradovat na různé novější modely. Nejstarším modelem, který lze upgradovat, je model MK3, který lze upgradovat na model MK3S+, MK3.9S, nebo MK4S.

To upgrade to the Original Prusa Upgrade MK3.5S it is necessary to have the MK3S or the MK3S+ printer. If you have the MK3, you can get the upgrade from the MK3/S to the MK3S+.

The MK4 can be upgraded to the MK4S, and the MK3.9 can be upgraded to the MK3.9S.

See below all of the upgrades available for the MK printers, and click on each one to find more information.

	MK4S	MK3.9S	MK3.5
MK4S	---	---	---
MK3.9S	---	---	---
MK3.5S	---	---	---
MK4		---	---
MK3.9	---		---
MK3S+ MK3S
MK3

MMU series

The oldest version of the Multi-Material Upgrade that can be upgraded to the MMU3 is the MMU2S for the MK3S+. The MMU3 is compatible with the MK3S+, the MK3.5/S, the MK3.9/MK4, and the MK3.9S/MK4S.

If you own the MK3S+, no further printer upgrades are required to install the MMU3.

For the other available models (MK3.5/S, MK3.9/MK4, MK3.9S/MK4S), additional upgrades may be needed before installing the MMU3.

Drop menu to choose the printer on the MMU Product page

	MMU3 for MK4S/ MK3.9S	MMU3 for MK4 MK3.9	MMU3 for MK3.5S	MMU3 for MK3S+
MMU3 for MK3S+			---	---
MMU2S for MK3S+

XL series

The Original Prusa XL can be purchased with one, two, or five toolchangers. It is possible to upgrade from single-tool to dual-head and five-head, and from dual-head to five-head. The upgrades can be sent with or without the tools for assembly.

	XL Five-Head	XL Dual-Head
XL Dual-Head		---
XL Single-Tool

SL1/S series

The Original Prusa SL1 can be upgraded to the SL1S.