EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

How to update PrusaLink (MK2.5/S MK3/S/+)

How to update PrusaLink (MK2.5/S MK3/S/+)

How to update PrusaLink (MK2.5/S MK3/S/+)
Last updated a month ago
How to update PrusaLink (MK2.5/S MK3/S/+)
 Difficulty
Easy
 Steps
5
 Available languages
CSPLDEESITFR

Step 2 Version compatibility

Version compatibility
Version compatibility
Version compatibility
Version compatibility

OTA updates require PrusaLink version 0.7 or newer running on your RPi 3 / 4 connected over USB, or RPi Zero connected via GPIO.

You can easily check the version in the Settings tab in PrusaLink or in Prusa Connect. Note that you nee

If you are running PrusaLink version 0.7RC3 or older,

You have to manually flash a newer PrusaLink image onto the SD card using Raspberry Pi imager; essentially making a fresh PrusaLink installation.

This way, you can also update PrusaLink setup with no internet access.

Step 3 OTA PrusaLink Update (in PrusaLink)

OTA PrusaLink Update (in PrusaLink)
OTA PrusaLink Update (in PrusaLink)
OTA PrusaLink Update (in PrusaLink)
OTA PrusaLink Update (in PrusaLink)
Open up PrusaLink, log in and visit the Settings tab.
Click Check Updates.
Note that this function works only on a network with an internet access.
If there are any updates available, click the Upgrade button.
Confirm upgrading.

Step 4 Update complete (in PrusaLink)

Update complete (in PrusaLink)
Update complete (in PrusaLink)
Update complete (in PrusaLink)
Update complete (in PrusaLink)
Wait until the update is complete. This might take up to a minute or two in case of the RPi Zero.
After the update finishes, you need to log in again.
Congratulations, your updated PrusaLink is ready.

Step 5 OTA PrusaLink Update (in Prusa Connect)

OTA PrusaLink Update (in Prusa Connect)
OTA PrusaLink Update (in Prusa Connect)
OTA PrusaLink Update (in Prusa Connect)
Similarly, you can update PrusaLink from Prusa Connect.
If there are any updates available, the arrow icon shows up on the printer details page. Click the icon.
Confirm updating and wait until the process completes.
This process can take up to a few minutes to finish.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us